Highways Department-HD has published Tender For Providing Road Furnitures And Immediate Road Safety Measures Works To The Government Roads In Cuddalore-H- C And M Division Vpm-125. Submission Date for this Tender is 30-01-2024. Road Work Tenders in cuddalore Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be level, uniform and free from streaks and holes etc., complete (as per MORT & H specification No. 803) |
| 2 | WORK - A |
| 3 | WORK - E |
| 4 | WORK - G |
| 5 | WORK - H |
| 6 | Providing and fixing reflective roadstuds of "categoryA" Raisedpavementmarkersmade out of poly carbonate / methylmethercrylate/ABSmouldedbodyconfirmingtoASTMD788 and reflectivepanelswithmicroprismaticlens capable ofprovidingtotal internalreflection of thelight enteringthelens face withretro reflectanceandchromaticityvaluesconforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/ 10/ 97-DO.III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to thebase shall be 35 + /-5degree. Eachreflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 + /-2mmand height not less than 30+ /- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road fortheshankstogoinside,withoutnailsandusing epoxy resin based adhesiveaspermanufacturer"srecommendationandcompleteas directed bythe engineer. The marker shall support a load of 13635Kgtestedin accordance with ASTM D4280 and confirming to IRC 35 - 2015 guidelines and MORT&H specification 804 etc., complete |
| 7 | WORK - A |
| 8 | WORK - G |
| 9 | WORK - H |
| 10 | Providing and Fixing of Retro Reflectorised Cautionary, mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to IRC 67-2010 and ASTM D 4956-09, Type IV Specification and fixed over 1.5mm thick Aluminium sheet fixed on back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of propoerly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60cm below Ground Level etc., complete including 7 year warranty for the Retro Reflective sheeting as per clause 6.9 of IRC 67: 2010 specification (as per MORT&H Spec. No. 801) 90cm Equilatoral Triangle |
| 11 | WORK - A |
| 12 | WORK - B |
| 13 | WORK - C |
| 14 | WORK - D |
| 15 | WORK - E |
| 16 | WORK - G |
| 17 | WORK - H |
| 18 | WORK - I |
| 19 | WORK - J |
| 20 | WORK - K |
| 21 | WORK - L |
| 22 | Providing and Fixing of Retro Reflectorised Cautionary, mandatory and Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to IRC 67-2010 and ASTM D 4956-09, Type IV Specification and fixed over 1.5mm thick Aluminium sheet fixed on back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of propoerly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60cm below Ground Level etc., complete including 7 year warranty for the Retro Reflective sheeting as per clause 6.9 of IRC 67: 2010 specification (as per MORT&H Spec. No. 801) 60X60cm Square |
| 23 | WORK - E |
| 24 | WORK - F |
| 25 | WORK - G |
| 26 | WORK - H |
| 27 | Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and informatory signs (with definition board) made out of High intensity Prismatic Grade sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick aluminium sheet fixed over a back supporting frame of 25mm x 25mm 3mm Mild steel angle and supported on a muild steel angle post 75 x 75 6mm with a clear height of not less than 2.10m from the ground level to the bottm of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cmx45x60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro - reflection as per table 6.6 of IRC 67-2012.the retro - reflective sheeting shall be convered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be optained as per IRC 67.2012. (as per MORTH spefification NO.801) ( 60cm X 45cm rectangular) |
| 28 | WORK-B |
| 29 | WORK-D |
| 30 | WORK-I |
| 31 | WORK-J |
| 32 | WORK-K |
| 33 | WORK-L |
| 34 | Providing and erecting of Retro - Reflectorised Cautionary, Mandatory and informatory signs (with definition board) made out of High intensity Prismatic Grade sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick aluminium sheet fixed over a back supporting frame of 25mm x 25mm 3mm Mild steel angle and supported on a muild steel angle post 75 x 75 6mm with a clear height of not less than 2.10m from the ground level to the bottm of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cmx45x60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High intensity Retro - Reflectro sheet shall consist of minimum coefficient of Retro - reflection as per table 6.6 of IRC 67-2012.the retro - reflective sheeting shall be convered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be optained as per IRC 67.2012. (as per MORTH spefification NO.801) 60cm Circular |
| 35 | WORK-L |
| 36 | Providing and Erecting of Retro - Reflectorised Hazard Marker Traffic Sign made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956 -09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mmMild Steel angle andsupportedon a mild steel angle post 75X75X6mm and 0.60m below ground level. The signpost shouldbe painted as per !RC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour withall leads andlifts, loading charges necessary for satisfactory completion of the work asdirectedbythe engineer in charge. High intensity Retro - Reflectro sheet shall consist ofminimum coefficient of Retro-reflection as per Table 6.6 of !RC 67-2012. The retro- reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per !RC67:2012.(asper MORT&H Specification No.801) 30cmx90cm rectangular |
| 37 | WORK - A |
| 38 | WORK - B |
| 39 | WORK - C |
| 40 | WORK - D |
| 41 | WORK - E |
| 42 | WORK - F |
| 43 | WORK - G |
| 44 | WORK - H |
| 45 | WORK - J |
| 46 | WORK - L |
| 47 | Suppy and installation of delineators ( road way indicators,Hazard markers and object markers),80-100 cm high above ground level,printed at alternatively black and white in 15 cm wide strips ,fitted with 80x100 mm rectangular or 75 mm dia circular reflectorised pannels at the top, buried or pressed into the ground and confirming to IRC 79 etc., complete (as per MORT&H specification No.806) |
| 48 | WORK - B |
| 49 | WORK - E |
| 50 | WORK - F |
| 51 | WORK - G |
| 52 | WORK - L |
| 53 | Providing and erected Direction and Place Identification Retro-reflectorised Sign Made out of High Intensity Prismatic Grade Sheeting confirining to Type-IV standards of IRC-67 :2012 and ASYM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm mild steel angle and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level in the bottom of the sqm board and 0.60m below ground level .The sign post should be painted as per IRC67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45mx60cm size including cost and conveyance of an material equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro reflection as per Table 6.6 of IRC 67-2012. The retro reflective sheeting shall be covered under 7 year warranty issued for fiel performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67-2012 (as per MORT&H specification No.801)(for sign having more than 0.9 sqm) |
| 54 | WORK-C |
| 55 | WORK-D |
| 56 | WORK-E |
| 57 | WORK-G |
| 58 | WORK-H |
| 59 | Providing and erecting of single sided Double guard metal beam crash barrier system 1.7 m high, comprising of 3 mm thick wall "w" beams posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986 Fe410/360 and dip galvanised having zinc Mass of 550 grams/sqm,minimum 950,mm above road /ground level fixed on ISMC series channel vertical post 150x75x5 mm spaced 2m center to center 312mmx83mm flange width x3mm thick,4318mm long post directly embedded in the concrete (M15) pit size 350x350x800mm for a depth of 750mm below ground .All fixing bolts and nuts hot dip galvanized confirming to IS 1367 clause 4.60 all complete as per technical specification and as directed by the engineer in charge. |
| 60 | WORK-D |
| 61 | WORK-E |
| 62 | WORK-F |
| 63 | WORK-G |
| 64 | WORK-H |
| 65 | WORK-I |
| 66 | WORK-J |
| 67 | WORK-L |
| 68 | Providing and Fixing of Retro Reflectorised Cautionary star sign made out of High intensity prismatic grade reflective sheeting sticked over CR sheet 0.2 mm/ 32 G thickness eith black enamel paint firmly fixed on the trees with 1 1/2" x 14 G wire nails of size 100mm x 100mm |
| 69 | WORK-H |
| 70 | Calculation of SubTotal, GST and Total Amount carried out by system automatically |
| 71 | Basic cost of value put to tender as per estimate |
| 72 | Add GST at 18% |
| 73 | Total Value put to Tender |
| 74 | Difference in Value |
| 75 | Bidder quoted value |
| 76 | Add GST at 18% of Final quoted Value |
| 77 | Total Value of Contract Including 18% of GST |
| 78 | Basic cost of value put to tender as per Estimate |
| 79 | Quoted Rate in Figures (Total Value of Contract Including 18% of GST ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
