Military Engineer Services-MES has published Tender For Repairs To Flooring, Kitchen Cabinets Certain Miscellaneous Works At Nstl Residential Area Under Age (I) Rnd Nstl, Visakhapatnam.. Submission Date for this Tender is 02-02-2024. Flooring Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | S & F Factory made ready to install Non-Toxic, Lead & Cadmium free, single extruded, three side Decorative Choice laminated, Solid PVC Door Frame, Double Rebated of size 75 X 60mm, water proof, termite proof, fire retardant, excellent screw holding capacity, mitred cut and joined with stainless steel screws, door frame shall be fixed to existing wall with 10 Nos of 10 X 100mm long Stainless steel screws and PVC Plugs [4 Nos on each vertical member and 2 Nos on each horizontal member] complete all as specified as directed. |
| 2 | S & F Factory made ready to install Non-Toxic, Lead & Cadmium free, single extruded, Water proof, termite proof, fire retardant, excellent screw holding capacity, Solid PVC Boards, 18mm thick, One Side Decorative Choice Lamination and other side Balancing White as in Cupboard Shutters fixed to Door Frame with and including Continuous [Piano] Hinges, Stainless Steel, Bright finish or Electrogalvanised and width of Flaps 40mm [When Open] and stainless steel screws complete all as specified as directed. |
| 3 | S & F Factory made ready to install Non-Toxic, Lead & Cadmium free, single extruded, Water proof, termite proof, fire retardant, excellent screw holding capacity, Solid PVC Boards, 18mm thick of White Colour as in Cupboard Shelves fixed to Guide Rails with stainless steel screws complete all as specified as directed. |
| 4 | S & F Aluminium anodised barrel Tower Bolt of size 100 mm size of extruded section complete all as specified and as directed. |
| 5 | S & F Stainless Steel Security Latch of size 50mm suitable for Single Cupboard shutters complete all as specified and as directed. |
| 6 | S & F Stainless Steel, Tubular Towel Rail, D Type, 300 mm long between flanges complete all as specified and as directed. |
| 7 | S & F Stainless Steel Curtain Rod of 25 mm dia including Stainless Steel Brackets of size suitable to 25mm dia curtain rod as in Coat Hanger complete all as specified and as directed. |
| 8 | S & F Stainless Steel Handles 150mm long, Decorative / Designer type suitable for Cupboard shutters complete all as specified and as directed. |
| 9 | S & F Magnetic Catches with Striking Plate, First quality suitable for Cupboard shutters complete all as specified and as directed. |
| 10 | S & F Continuous (piano) hinges of brass bright finished of width of flaps 40mm complete all as specified and as directed. |
| 11 | S&F for Mortise lock of 65mm size 2 lever suitable for fixing in cupboard shutters complete all as specified and as directed |
| 12 | M & L for 18mm thick (+/-5%), 100% lead free, plain PVC solid sheet of minimum 0.55 density fixed as in kitchen cabinet including shutters and necessary fixing arrangement such as brackets, screws as requiredand all the edges shall be covered with 1mm thick edge bending tape or 90 degree edge bent finish as per the manufacturer"s instructions complete all as specified and directed. |
| 13 | S & F 1.00 mm thick, Decorative PVC laminate of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified and directed. |
| 14 | S & F in repairs stainless steel basket of size 475mmx500mmx100mm with external width 475mm as in cutlery, cup and saucer basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer"s instructions.) |
| 15 | S & F in repairs stainless steel basket of size 475mmx500mmx200mm with external width 475mm as in thali, plain wire basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer"s instructions.) |
| 16 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 17 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 18 | S & F in repairs stainless steel sliding/telescopic channel of length 20 inch (500mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm including necessary fixing arrangement complete all as specified and directed. |
| 19 | S & F in repairs cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed. |
| 20 | S & F in repairs stainless steel modular kitchen handle, 100mm long complete all as specified and directed. |
| 21 | M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in Cement mortar 1:4 |
| 22 | M&L Providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed. [Note: Reinforcement shall be measured and paid separately under relevant item of this BOQ] |
| 23 | S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed. |
| 24 | S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed. |
| 25 | M&L rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick work in cement mortor 1:6 in pathchesfinishing the surfaces even & smooth |
| 26 | M&L for preparation newly plastered internal surfaces of walls, applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface and applying two coats of interior acrylic emulsion over a coat of interior primer complete all as specified. |
| 27 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 28 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 30 | M&L Non skid colouredceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over andincluding 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-0 using 12.5mm graded crushed stone aggregate,complete all as specified and directed |
| 31 | M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified. |
| 32 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 33 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 34 | S&F MS butt hingecold rolled medium weight 100mm size |
| 35 | S&F anodised aluminium barrel tower bolt 150mm long. |
| 36 | S&F "D" type handle aluminium anodized 125mm in size. |
| 37 | S&F Aluminium Sliding Bolt of Size 200mm |
| 38 | M&L for uPVC factory made, white colour louvered ventilators made of extruded profiles with figured/ frosted glass louvers; profiles of frames and sash will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete asdirected by the Engineer-in-charge. |
| 39 | Taking up or down galvanized steel tubing 15mm bore with fittings. |
| 40 | S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laid in floors complete all as specified. |
| 41 | S&F in repairs brass CP mixer for mixing hot & cold water including three joints, fancy typefixed to pipes or unions for 15mm bore and plugging secured to wallsall as specified and as directed.make: Jaquar or equivalent in Marc/ Plumber] |
| 42 | S&F Cast iron floor trap, with including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with dia of outlet 100mm complete all as specified. |
| 43 | S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 44 | S&F PVC (SWR) reducers 110/75mm bore complete all as directed. |
| 45 | Demolition of breaking up drain pipes( AC or reinforced concrete )set in cement mortarfor 100mm internal dia of pipes. |
| 46 | S&F PVC (SWR) vent cowl 110mm dia. |
| 47 | S&F PVC (SWR) bends any radius provided with access door 110mm bore. |
| 48 | S&F 50mm bore dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or laid in floors etc. including all specials complete all as specified and as directed. |
| 49 | S&F 5 Shelves plate rackmade of stainless steel .63mm thick size 600x750x250 mm type wall mounted and rectangular shape as in kitchen including all specials complete all as specified and as directed. |
| 50 | S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed. |
| 51 | M&L for vitrified tiles, double charged, first quality of size 600x600mm, 9 to 10mm thick as in Floors, set and jointed in cement slurry, finished with flush pointing in coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)] |
| 52 | M&L for vitrified tiles, double charged, first quality for skirting cut from tiles of size 600x600mm, 9 to 10mm thick, to suit the size of floor tile, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. [Note: The colour / shade / design of tiles shall be as approved by AGE (I)] |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
