|
| 1 | Foundation Work |
| 2 | Foundation Plate - Square, 15’’x15’’x12mm |
| 3 | Wall Plate- Rectangle, 6”x6”x10mm |
| 4 | Foundation Size: Cubical, PCC 30”x30”x30” for each pillar chamber - PCC (Masonry) for pillar foundation using Cement, Red Sand, and ½” Gitti |
| 5 | M.S. Pipes for structure:MS Built-up section/Tubular Structure (MS built-up section:- - Rolled section & plates conforming to IS 2062, Tubular Structure:- made from Steel hollow sections, ISI marked conforming to IS 1161/4923- Brands allowed - SAIL /RINLBSL/APPOLO /TATA/JINDAL) in the profile shape as per conceptual drawings with specified plate connectors, pinion joints, Plates, hollow sections etc - Application of primer and Duco Paint |
| 6 | 10” Diameter Pipe - Round, 90Kg x 4.8mm (Rate, per Kg) |
| 7 | 2” Diameter Pipe - Round, 33Kg x 4.5mm (Rate, per Kg) |
| 8 | 3” Diameter Pipe (55kg) (Rate, per Kg) |
| 9 | 2½” Diameter Pipe (42kg) (Rate, per Kg) |
| 10 | Glazing Strip - 1.5\" x 16ft, 1.5mm |
| 11 | Roofing Membrane |
| 12 | Pre stressed Tensile Membrane Fabric structure per conceptual drawing over MS Steel structure frames with all fittings and fixtures such as Galvanized MS End Plate Shackles, Rigging Screws, Turnbuckles, swedge, fork, keder rods & galvanized MS strands with stainless steel end terminals complete as per Drawing / Detail & as per particular/ Technical specifications and as per the directions of Engineer-in-charge. (Rate includes cost of fabric, patterns, forming, cutting, fabrication, hot weld stitch of fabric, Transport to the site assembling and installation with Gl strands, hardware, EPDM Gasket and required accessories wherever required complete including lifts up to all heights, tools & plants, and necessary scaffolding etc. required for all operations in all respect as per direction of Client).- The Tensile fabric should be of min 900GSM weight- Tensile fabric brands allowed Ferrari / SATTLER/Technospan or Equivalent- The overall warranty for Tensile structure shall be of minimum 5 years. |
| 13 | Accessories |
| 14 | Fastner 8\" x 12mm |
| 15 | Foundation Bolt 18\" x 16mm |
| 16 | Scaffolding Structure - 6000sft - 15-20ft high - rental basis |
| 17 | Paint/Coating work |
| 18 | Electrical Cabling, Wiring and LIghting (All Types (Multi-functional) cabling & wiring from MCB/Panel to Switch Boards - Havells / Anchor or equivalent) |
| 19 | Roof Lightings (Metal LED) - Havells/ Phillips/ Surya (White / Off-white) 100w |
| 20 | Sound System Connectivity; 6 module board + Plates |
| 21 | Speaker Wire (Copper) (Bundle of 100mtr) |
| 22 | Fan Connectivity - 2 module board + Plates |
| 23 | Cooler Connectivity - 4 module board + Plates |
| 24 | LED Wall Connectivity - 6 module board + Plates |
| 25 | Mobile Charger Points & USB ports - 18w/ 25w, 3amp/ 4amp |
| 26 | Tower AC Connectivity - Industrial Socket & Board |
| 27 | M.C.B. |
| 28 | SP MCB for Lights |
| 29 | SP MCB for Ceiling Fans |
| 30 | 20amp for Cooler |
| 31 | 20amp for LED |
| 32 | 16amp for Farrata Fans |
| 33 | SP MCB- 32amp for Tower AC |
| 34 | For Multipurpose 6 Sockets: 2 |
| 35 | TPN MCB- 63amp for Main MCB |
| 36 | Panel Board |
| 37 | Distribution Board |
| 38 | TPN |
| 39 | SPN |
| 40 | Switches |
| 41 | 5Amp |
| 42 | 16amp |
| 43 | Sockets |
| 44 | 5Amp |
| 45 | 16amp |
| 46 | PVC Conduit pipe bundles |
| 47 | Flexible Pipe Bundle |
| 48 | Cable 120 Sq mm armoured in mtr |
| 49 | Wires |
| 50 | 1mm for earthing (Green) - 300mtr |
| 51 | 1.5mm (Black) - 300mtr box |
| 52 | 1.5mm (Red) - 300mtr box |
| 53 | 2.5mm (Blue) - 300mtr box |
| 54 | 2.5mm (Black) - 300mtr box |
| 55 | 4mm (Yellow) - 300mtr box |
| 56 | 4mm (Black) - 300mtr box |
| 57 | Switch Board and plates: Multipurpose plug points 5 amp - 16 amp (18 module) |
| 58 | Misc Screws, Nails, Kaju-pins, Tie-Hooks, Hanging Hooks, Clamps, Tie-bands, Insulation Tapes, |
| 59 | Screws - (Black) Box of 100 |
| 60 | Tie-bands (Pack of 100) |
| 61 | Insulation Tapes Box of Dozen |
| 62 | Kaju Pin 25mm Pack of 100 |
