Housing Urban and Rular Development Local Bodies Closing in 0 days TDR #41612045

Construction Of Community Sanitary Complex Near Pyt Ghar Mahanpur Upperw. No. 6 Pyt. Mahanpur Upper Block Mahanpur District Kathuaunder Sbm2023-24

Issued by Local Bodies · mahanpur, Jammu And Kashmir
Tender Value
3 Lakhs
Estimated cost
Bid Submission
18 Jan 2024
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
mahanpur → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Community Sanitary Complex Near Pyt Ghar Mahanpur Upperw. No. 6 Pyt. Mahanpur Upper Block Mahanpur District Kathuaunder Sbm2023-24

BOQ

Name of Work: Construction of CSC near Pyt Ghar Mahanpur UpperW. No. 6 Pyt. Mahanpur Upper Block Mahanpur District KathuaUnder SBM2023-24 ESTT AMOUNT 3.00 LACS
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil
2Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
4Filling of Stones
5Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3
6Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual).
7Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
8Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
9Centering and shuttering including strutting, propping etc. and removal of form work for:
10Foundations, footings, bases for columns
11Suspended floors, roofs, landings, balconies and access platforms
12Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1315mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)
1412mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)
15Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50mm thick with 20 mm nominal size stone aggregate.
16Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded
17Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade: ON NEW WORK
18Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75mm diameter pipes
19Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.
20Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.
21Providing and fixing PTMT stop cock of approved quality and color.15 mm nominal bore, 86 mm long, weighing not less than 88 gms.
22Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms.
23Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25 mm nominal bore
24Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour. 15 mm nominal bore with 45 cm length.
25Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outleet and overflow pipes but without fittings and the base support for tank
26Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diametre
27Providing and fixing white vitreous china water closet squatting pan (Indian type). Orissa pattern W.C. pan of size 580x440 mm
28Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete. 10 liter capacity -White
29Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings.Flat back wash basin of size 550x400 mm.
30Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste ittings complete. Flexible pipe 32 mm dia.
31Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms
32Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
33Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
34Applying priming coat:With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood)
35Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
36Carriage/consumption of Material
37Sand for 30 Km by MT & AT 50 Mtr
38Agg. 30 Km by MT & AT 50 Mtr
39Agg. 30 Km by MT & AT 50 Mtr
40Brick for 140Km by MT & AT 50 Mtr
41Providing and fixing ofExternal/Internal electric connections including wiring from Service main to main panelboard including MCB and then ionternal wiring from MPB to electrical points, switchBoards with switches as per requirement , bulb holder, junction boxes with covers, conduit pipes in slab, cuttingchases in walls forconcealed conduit pipes, bends, LED bulbs, 02 number electrical fans. all complete Job
42Sign Board

AI Tender Summary

OUR REF NO 41612045
AUTHORITY Local Bodies
TENDER VALUE 3 Lakhs
LAST DATE 18-01-2024
Authority
Authority Name Rural Development And Panchayats Department
Work Description Construction Of Community Sanitary Complex Near Pyt Ghar Mahanpur Upperw. No. 6 Pyt. Mahanpur Upper Block Mahanpur District Kathuaunder Sbm2023-24
Basic Detail
Tender No e-NIT No.256/REW/K of 2023-24 Dated 12/01/2024
Bidding Type Tender
Location
City mahanpur
State Jammu And Kashmir
Key Dates
Publish Date 12 Jan 2024
Submission Date 18 Jan 2024
Open Date 19 Jan 2024
Finance
Tender Value 3 Lakhs
Tender Fee 500
EMD 6000
Exemption Not Available
Document List
d5e51242-69bf-4d88-87d2-042880acc193.html
BOQ_711795.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 12, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 18, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 19, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d5e51242-69bf-4d88-87d2-042880acc193.html

xls

BOQ_711795.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders