|
| 1 | Excavation in soil in hilly areain all heights and depths in all kinds of soil including saturated soil comprising of mixed soil , ordinary rock and hard rock .All work of rock cutting by blastingshallbe carried out by taking all necesary precautions against soil erosion ,damages to hill side ,water pollutionetc. and to protect stability of hill side .Rock shall be excavated withchiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting /excavation including rock excavation shall be carried out true to lines ,grades ,sides slopes,width,camber,super-elevation and level as shown on the drawing andas directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600to achive designed formation width including hauling and stacking of materials useful for constrcutionat suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its levelling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account,filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding .The recovery for stones ,whether usefule or not for 1488.30 cum. (One thousand four hundred eighty eightpoint thirty Cubic Metre) at the rate of Rs 300/-only (Rupees threehundred only ) per cubic metershall be effectedon prorata basis in all circumstances .Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor ,which shall have to be duly compensated by him in all cases.. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavatedsuitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thicknessincluding shoring and strutting and pumping and bailingout water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 3 | Providingand layingconcrete Mechanically mixed and vibrated 1:6:12 (one cement: six sand : twelve graded stone aggregates 40 mm (forty millimetre) nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification section 800 and 1200 curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 4 | Providing and laying concrete mechanically mixed and vibrated PCC M-10(Ten) design mix with cement contents not less than 220kg (two hundred Twenty kilogram per cubic metre) with 20mm(twenty millimeter) nominaal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 5 | Providing concrete for plain/reinforced concrete in open foundation complete as per drawing and tecnical specification Section 800 & 1200. PCC M20 (1:2:4)( one cement two sand four aggregate) including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying concrete mechanically mixed and vibrated grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with aggregate 40mm(forty millimeter) nominaal size for plain/reinforced concrete in foundation plinthor similar works complete as per drawings and MoRD technical specificcation section 800, 900,1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 7 | Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with 40mm (forty millimetre) nominal size graded stone aggregate on ground or under water including curing complete including pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets andtoe wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 including carriage of materials within all leads, lifts and other incidental andas per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi,royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 8 | Providingand layingconcrete Mechanically mixed and vibrated1:4:8 (One Cement isto four sand isto eight graded crushed stone aggregate 40 mm (fortymilimetre) nominal size for plain /reinforced concretein open foundationsand plinths or similar works complete as per drawing and MoRD technical specification rural roadssection 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per thedirection of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 9 | Construction of dry rabble masonry for retaining walls, breast walls, revetment walls and parapets etc. for sub structure and super structure complete as per drawing and technical specification section 700and 1300 includingand hauling of materials in all leads and lifts and as per entire satisfaction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 10 | Stone masonry work in cement mortarfor substructure complete as per drawing and technical specifications section 700 & 1200. includingand hauling of materials in all leads and lifts and as per entire satisfaction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 11 | Providing and laying of interlocking concrete block pavements having thickness 80 mm (eighty millimetre) as per drawing and technical specification Clause 1500including carriage of materials with in all leads and lifts as per the entiresatisfaction and direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 12 | Providing and laying reinforced cement concrete in substructure as per drawings and technical specification section 800 & 1200RCC M 20 (twenty)including all leads , Lifts and carriage of materials complete as per entire saisfication of the Engineer in Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 13 | Providing and laying reinforced cement concrete M-25 (twenty five) in foundation as per drawings and technical specification section 800& 1200 .including all leads , Lifts and carriage of materials complete as per entire saisfication of the Engineer in Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 14 | Providing and laying reinforced cement concrete M-25 (twenty five) in superstructure as per drawings and technical specification section 800& 1200.including all leads , Lifts and carriage of materials complete as per entire saisfication of the Engineer in Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 15 | Providing and laying reinforced cement concrete M 25 ( M- Twenty five ) in super structure as per drawings and technical specification section 800& 1200.including all leads , Lifts and carriage of materials complete as per entire saisfication of the Engineer in Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 16 | Providing and laying cement concrete wearing course M 30 (thirty) grade including reinforcement complete as per drawings and technical specification section 800 & 1200including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 17 | Supplying , fitting and placing HYSD bar reinforcement (Fe 415) in superstructure -structure complete asper drawing and HP.PWD. technical specifications section 1000 including all leads, liftsor asdirected bythe Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 18 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, liftsand other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 19 | Drainage spout complete as per drawing and technical specification section 1200 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 20 | Providingweapholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred milimetre) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specificationssection 1200 and as per entire satisfaction,directin by Engineer-In-Charge and including carriage of materails with in all leads and lifts.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 21 | Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 22 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP2 (Non Pressure-two) of 900 (Nine hundred )milimetre internal dia metre forculverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is totwo sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapetsas per drawings and MoRD technicalspecifications section 1100including carriage of materials with in all leads and lifts as per the entiresatisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 23 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP2 (Non Pressure-two) of 600 (Six hundred )milimetre internal dia metre forculverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is totwo sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapetsas per drawings and MoRD technicalspecifications section 1100including carriage of materials with in all leads and lifts as per the entiresatisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 24 | Providing and erecting W metal beam crash barrier comprising 3 mm thick corrugated sheet metal beam rail 70 cm above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mmx 5 mm special 2.00 metrecenter to center 1.80 metre high 1.10 metre below ground road level all steel parts and filamentsto be galvanized by hot dip process, a fitting to confirm to IS 1367 and IS-1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm 330 mm long complete as per MORTH Specification section 800 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 25 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 26 | Stone soling properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm (one hundred millimetre) spread thickness (finished work including materials and labour)including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 27 | Construction of Granular Sub-Base(Grade-1)by providing well graded materials, as per table 401 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 28 | Providing, laying, spreading and compacting by mechnical means of crushed stone aggregatesize 53mm to22.4mm ( fifty three millimetre to twenty two point four millimetre) Grading-III 75mm( seventy five millimetres) consolidated thickness towater bound Macadam specification including spreading in uniform thickness using template,hand packing, rolling with three wheel 80-100 K.N.(eight to one hundred) static roller in stages to proper grade andcamber, including applying and brooming, stone screening type-B of size 11.2mm( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eightcubic metres) per ten square metres andto fill up the interstices ofcoarse aggregate, watering andcompacting to the requireddensity as per M.O.R.D. technical specifications section 400 andas per the entire satisfaction and direction ofEngineer – in- Charge includingcarriage of materials within all leads, liftsand other incidental. The rate includesoctroi,royality, Malkana, toll tax or any other taxesimposed by the Government but excluding GST. |
| 29 | Providing and applying primer coat with Bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer at the rate 1.00 Kg. (Zero point eight five kilogram)persquare metreusing one part of bitumen emulsion SS-I and two parts of water mixed with Nano technology Tera prime emulsion @ 1% (One percent) of weight of emulsion by mechanical means as perM.O.R.D. technical specifications section500as per the entire satisfaction and directions ofEngineer – in- Charge including carriage of materials within all leads,liftsand other incidentals . The rate isincludingoctroi,royality, Malkana, toll tax or any other taxesimposed by the Government but excluding .Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 30 | Providing and applying tack coat with Bitumen emulsion (RS-I) on the prepared bituminious surface cleaned with hydraulic broom and spraying with bitumen emulsion pressure distributor at the rate 0.275 Kg (Zero decimal two seven five kilogram) per Square metre using one part of bitumen tackemulsion RS-I and two parts of water mixed with Nano technology nanotac @ 1.4% (One decimal four percent) of weight of emulsion as per MORD technical specification section 500, and as perdirection of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 31 | Providing and laying dense graded bituminous macadam with 100-120 (one hundred to one hundred twenty) TPH batch type HMP providing and average outout of 75 tones per hour usingcrushed aggregate of specified grading with bituminous binder @ 4.0 to 4.5per cent by weightof total mix and filler, Zycothermat the rate 0.1% (zero decimal one percent) one perse weight of bitumen, transporting the hot mix to work site, laying with a hydraulic paver finisherwith sensor conrol to the required grade, level and alignment,rollingwith smoothwheeledtandom roller to achive the desire compaction as per MoRTH technical specification section 500 including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 32 | Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with 100-120 (one hundred to one hundred twenty) TPHhot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-Ten) at the rate of not less than 5.5% (five point five percent of mix weight or as per design mix with nono technology (Zycotherm) at the rate 0.1% (zero decimal one percent) weight of bitumen, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor conrol to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with sommth three wheel roller 8-10 (eight to ten ) tonne capacity for initial break down rollng and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa(Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eighty) tonne sommth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 33 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain panelled cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (forty three) grade cement and any other type as per MORD Technnical Specification Section 1500. M30 (M-thirty) Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 (zero point two) cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 (fourteen) days, using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD Technical Specification section 1500 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing \"Citizen Information Boards\" as per specifications and drawings Two MS Plates of 1.60mm (one point sixty milimeter)thick duly welded with MS angle iron frame 25mmx25mmx5mm (twenty five millimetre x twenty five millimetre x five millimetre) on edges supported with 2Nos horizontal posts made of 75mmx75mm (seventy five millimetre x seventy five millimetre) of 125SWG Steel tube duly embanded in and including cement concrete M-15 (fifteen) grade blocks of 600mm x600x750mm (six hundred millimetre x six hundred millimetre x seven hundred fifty millimetre) below ground level. All MS will be stove enameled both side lettering and printing arrowsborder etc will be painted with ready synthetic enamel paint of superior quality in required shade and colur. all sections of posts and steel tube will be primer and two coats of epoxy point as per drawing. and technical specification section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. he rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 35 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be paintedThe rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. with primer and two coats of epoxy paint as per drawing & MORD Specification section 1700 and Annexure 1700.1 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 36 | Providing and erecting direction and place identifications of semi reflective sign boards up to 0.90 sqm as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour.Supported and welded on 47 mm x 47mm of 12 SWG Squaretube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per MORD technical specification section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing (600 mm equilateral & triangle) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 38 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade(fifteen) cement concrete 450x450x600 mm (four hundred fifty millimetre x four hundred fifty millimetre x six hundred millimetre), 600mm (six hundred millimetre) below ground level as per approved drawing section 1700 (800mmx600mm rectangular) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing road side Single Chevron markers of height 600mmmade of MS pipe of size 50mm of 1.6 SWG having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mmlength Balance 300mmIt shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cmblock with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate ) 20mm (twenty milimeter ) nominal size complete in all respect The work shall be executed as per the direction of the Engineer- Incharge including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 40 | Providing10 (ten) nos rumble strips covered withbituminous carpet, 15-20 mm (fifteen -twenty millimetre)high at center, 250 mm (twohundred fifty millimetre) wide placed at 1 m (one meter ) center to center at approved locations to control speed, marked with white strips of road marking paint as per drawing and Technical Specificationincluding hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 41 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawingspecifications Section 1700 (600 mm circular board ) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 42 | Painting lines, dashes, arrows, etcetra on roads in two coatson new work with ready mixed road mKasauling paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 43 | Providing and fixing hazard marker of size 900x300 mm made of 2mm ( two millimetre) thick aluminum sheet with back support of M.S. angle 25x25x3 mm as per section 1700 of RT&H specificationscompete board process by heat treatment process. Hi grade sheeting or front side and provided withby postof ht. 1. 50 mtr made of M.S. angle 50x50x6 mm fixed in C.C. 1:2:4 back of size 600x600x600including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 44 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 45 | Providing and fixing of road stud 100x 100 mm (one hundred x one hundred millimetre) , die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm (thirty millimetre) upto a depth of 60 mm(sixty millimetre) and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973( section 1700) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 46 | Reinforced cement concrete Mechanically mixed and vibrated M-15 grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (ordinarykilometer stone precast). including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 47 | Reinforced cement concrete Mechanically mixed and vibrated M-15 grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (200 meter stone pre cast) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 48 | Reinforced cement concrete Mechanically mixed and vibrated M-15 grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (5th kilometer stone pre cast). including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 49 | Construction of unlined surface drains of average cross sectional area 0.40 sqm. in soil to specified lines grades levels and dimensions .Excavated materials to be used in embankment with a lift up to 3 m and lead of 50 m (average lead 25 m ) as per technical Specification section300as per the entire satisfaction and direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 50 | Routine Maintenance after completion of construction work as per terms and condition of bid document that is 7c(vi) of contract data to general condition of contract and technical specifications of Ministry of Rural Development for rural roads August 2004 for rural roads including hauling /carriage of all labour equipment and materials to various locations through all modes of transportation in all leads and lifts to the entire satisfaction of the Engineer in charge.As per rates Specified in Bidding Documents. |
