|
| 1 | Descripation of Items |
| 2 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : |
| 3 | Powder coated aluminium (minimumthickness of powder coating 50 micron) , DSR-2023- 21.1.1.2 |
| 4 | For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately) |
| 5 | Powder coated aluminium (minimumthickness of powder coating 50 micron), DSR-2023-21.1.2.2 |
| 6 | Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screwsetc. complete as per architectural drawings and directions of engineerin-char |
| 7 | Pre-laminated particle board with decorative laminationon one side and balancing lamination on other side , DSR-2023-21.2.2 |
| 8 | Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item): |
| 9 | With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) , DSR-2023-21.3.2 |
| 10 | Providing and fixing double action hydraulic floor spring of approvedbrand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate with double spring mechanism anddoor weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matchingto the existing floor finishing and cover plates with brass pivot andsingle piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge. |
| 11 | With brass cover plate minimum 1.25 mm thickness, DSR-2023-21.4.2 |
| 12 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction ofEngineer-in-charge complete. |
| 13 | Upto 5mm depth and 5 mm width, DSR-2023-21.8.1 |
| 14 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) foraluminium doors including necessary cutting and making good etc.complete., DSR-2023-21.13 |
| 15 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in |
| 16 | Powder coated minimum thickness 50 micron aluminium, DSR-2023-21.16.2 |
| 17 | Providing and fixing frame work for partitions/ wall lining etc. made of50x50x1.6 mm hollow MS tube, placed along the walls, ceiling andfloor in a grid pattern with spacing @ 60 cm centre to centre both ways(vertically & horizontally) or at required spacing near opening, withnecessary welding at junctions and fixing the frame to wall/ ceiling/floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, includingmaking provision for opening for doors, windows, electrical conduits,switch boards etc., including providing with two coats of approved steelprimer etc. complete, all as per direction of Engineer-in-charge, DSR-2023-9.154 |
| 18 | Providing and fixing ISI marked aluminium butt hinges anodised (anodiccoating not less than grade AC 10 as per IS: 1868) transparent or dyedto required colour or shade with necessary screws etc. complete: |
| 19 | 100x75x4 mm, DSR-2023-9.95.3 |
| 20 | Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screwsetc. complete |
| 21 | 250x16 mm, DSR-2023-9.96.2 |
| 22 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : |
| 23 | 150x10 mm , DSR-2023-9.97.4 |
| 24 | Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : |
| 25 | 100mm, DSR-2023-9.100.2 |
| 26 | Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screwsetc. complete |
| 27 | Twin rubber stopper, DSR-2023-9.101.2 |
| 28 | Providing and fixing bright finished brass 100 mm mortice latch andlock, ISI marked, with six levers and a pair of anodised (anodic coatingnot less than grade AC 10 as per IS : 1868) aluminium lever handles ofapproved quality with necessary screws etc. complete., DSR-2023-9.103 |
| 29 | Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete. . , DSR-2023-9.83 |
| 30 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required,to achieve even shade and colour., DSR-2023-13.82.1 |
