Tender For Providing And Fixing Of Galvalum Roofing Shed With Grill Work To The Existing Community Hall At Kombakkampet In Villianur Constituency, Puducherry.
Tender Value
8.54 Lakhs
Estimated cost
Bid Submission
24 Jan 2024
0 days left
EMD
17082
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thattanchavady → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Fixing Of Galvalum Roofing Shed With Grill Work To The Existing Community Hall At Kombakkampet In Villianur Constituency, Puducherry.
BOQ
| Sl. No. | Item Description |
| 1 | Code.No 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m - all kinds of soil |
| 2 | Code.No 5.1.2Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering,finishing and reinforcement -All work upto plinth level : 1:1.5:3 (1 cement : 1 .5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 3 | Code.No 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 4 | Code No.10.16.1 Steel work in built up tubular(round,square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes |
| 5 | Code.No 11.61Providing and laying 22 mm thick factory made pre-polished cement concrete flooring tiles of required colour and design over 20mm thick cement mortar 1:4 (1 cement : 4 sand) and jointed with cement slurry mixed with an admixture of pigment to match the shade of the tile - (Endura \ Ultra \ Dazzle \ Technic) |
| 6 | Code.No 12.50Providing & fixing precoated galvanised iron profile sheets (size, shape, and pitch of corrugation as 0.50mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required . |
| 7 | Code.No 12.51.4Providing and fixing precoated galvanised steel sheet roofing accessories 0.5mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns using self drilling / self tapping screws complete - Barge board (Upto 300 mm) |
| 8 | Code.No 12.51.5 Providing and fixing precoated galvanised steel sheet roofing accessories 0.5mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns using self drilling / self tapping screws complete - Crimp curve |
| 9 | Code.No 13.1.1 12mm cement plaster of mix -1:4 (1 cement |
| 10 | Code.No 13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work |
| 11 | Code.No 12.41.2Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter |
| 12 | Code.No 12.42.6.2 Providing and fixing on wall face each unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe |
| 13 | Code.No 10.25.1Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required all complete |
| 14 | NPSRProviding and fixing special shaped rain water gutter made out of aluminium sheets of 1.25mm thick of size 35cm of vertical height on one side, 25cm width at bottom and 30cm vertical height on other side in which 10cm of width is bended to \"L\" shape to suit with existing roofing sheet bottom side. the joints of the gutter lengths are provided with 15cm lap jointed with special resin packing with stainless steel boltings are packed with sealents for 100% leak proof. both the ends of the gutter is closed with same aluminium sheets in the required shape and pipe line fixing provision is provided on both ends for fixing rain water pipes. the gutter assembly is placed in the clamps made out opf 40mm x 6mm MS flats bended to the gutter shape and welded with th eexisting roof trusses and purlins of not less than 1.2 m spacings. the bottom side of the gutter assembly is supported with M.S. angle of size 40mm x x40mm x 6mm of not less than 3m spacings rate includes all the materials, labour charges, aluminium sheet bending charges, stainles steel bling in joints sealent packing, errecting to the required height and location with welding at site, transportation etc., complete. Rate approved vide Lr.No.364/PW/SEI/AE(P)-II/F.No.221/10-11. dt.22.12.2010. |
| 15 | NPSR Bending the 50mm dia pipes to the required arch shape using Hydraulic Bending machine and toos etc., complete. |
| 16 | NPSRProviding and fixing G.I sheet of required size and shape to the existing ornamental gate of sheet thickness 1.6mm (16SWG). The Rate includes all materials labour charges such as cutting, welding and grinding at site using welding machine, cutting machine and grinding machine and transportation etc., complete. Rate approve vide Lr. No.684/PW/SEI/AE(P)-I/F.NO.300/2012-13. dt.30.03.2013. |
| 17 | NPSR Supply and fixinf of 20-24W LED tube light fitting. Make :Philips/havells/ Wipro. Approved no.352/PW/SE-1/AE(P) |
| 18 | Code.No 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm |
| 19 | Code.No 1.27.5 Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 8 module (125 mm x 125 mm) |
| 20 | Code.No 1.17.1Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required - 1 X 1.5 |
| 21 | Code.No 1.17.12Supplying and drawing following size2.8s of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed steel / PVC conduit as required -3 x 2.5 sq.mm |
| 22 | Code.No 1.24.1 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 5/6 A switch |
| 23 | Code.No 1.24.5Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 A socket outlet |
AI Tender Summary
Tender Timeline
Jan 12, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 24, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender