Hub Cutter -( Needle Cutter)Technical Specification-• The cutting blade of the cutter will be made of stainless• The thickness of the blade will not be less than 0.5mm one side sharpen to cut minimum of 10,000 cuts.• All other metal if used in the hub cutter will be made of galvanized carbon steel will with stand rusting even in rough weather with high humidity coastal region for a minimum of five year ( IS 277 of 2003- galvanized steel sheet specification)• The sharp container should be made of polypropylene (PP) of not less than 4mm thick and should be white/translucent.• Shape: the shape of the container will be such that the lid is tightened with the body. • Capacity Range: Able to destroy from hub of AD Syringe with needles from 18-28 gauge diameter and from 10-25 mm length and fitted with all type of needle fitting.• Resistance of piecing: Container shall accept 500cut needle along with the hub when it is ¾th full ( filling line). Needleshall not penetrate container walls when filled up to the filling line.• Temper-proofing : When contaminated needles are being dropped into container, it shall remain sufficiently sealed so as to prevent a hand from entering. Needle should not protrude from the container when the box contains 500 needles with hub.• Capacity of the container: have sufficient capacity to hold 500.• Technique: The device shall be designed to facilitate the location and entry of the needles so that the AD Syringes is cut from hub by having.• A non-critical angle of the needle relative to the entry point.• Handling: Able to be carried in one hand and portable• Should be ISO/ CE Certified.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
