Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-02-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-02-2024 |
| 2 | 07-02-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-02-2024 |
| 3 | 31-01-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-02-2024 |
| Sl. No. | Item Description |
| 1 | SPECIAL REPAIR OF BLDG NO P-219 AT INAS 339 AT INS HANSA.(B/R PORTION) |
| 2 | M&L for gunniting exposed concrete surfaces of beam, column and slabs with one layer of conplast spray set modified concretein proportion (50Kg cement 3 to 6mm granite chips 75 kg zonal sand 75 kg and complast 2% by weight of cement water 1 to the following locations :- |
| 3 | 40 mm thick in columns |
| 4 | 30 mm thick in beams |
| 5 | 20 mm thick in slabs |
| 6 | S&F hard drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dianot exc. 4 Kg/sqm complete all as specified and as directed. |
| 7 | Bonding the entire exposed surface with one coat of fosroc Nitop bond SBR as per manufacturer instructions over wire fabric and surfaces of concrete structure complete all as specified and as directed. |
| 8 | M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep hole in structural members at the interval of 500mm center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element. Work shall be carried out as under :- (i)Cleaning of holes - Clean the holes by air blower prior to fixing nozzles.(ii) Fixing of nozzles - Insert 12mm dia Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the hole by applying thixotropic epoxy putty to ensure complete sealing . Cure the system for min 12 hrs.(iii) Cutting of nozzles - Cut the nozzles by chisel after completion of grouting without damaging structural elements. |
| 9 | M&L for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including mixing of material.Mixing of materials :- Mixing of material components (part a&b) in the required quantities as per manufacturer\"s instruction by weigh batching. Grouting maintain the pressureat exit (0.5 to 1.0 kg/cm2) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural element @ 100ml per nozzle. Repeat the process for all the nozzles. |
| 10 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings |
| 11 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 12 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 13 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed in floors/ walls complete all as specified and as directed. |
| 14 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 15 | S & F in repairs 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 16 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 17 | Dismantling mild steel work of any description not otherwise provided for |
| 18 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane granties, rails and framings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confrming to Fe 410-Wincluding cleats, distance pieces etc complete all as specified and as directed. |
| 19 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. |
| 20 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with ANF (Board) edge tiles with Armstrong 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 0.5, Light Reflectance =85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 34%.The tile shall be laid on Armstrong Prelude38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 10 year warranty complete all as specified and as directed. |
| 21 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and remove from site complete all as specified and as directed. |
| 22 | Taking down chowkat or framesexc 1.5 sqm but n. exc 4 sqm each (w/o taking off shutters from the frame) and remove from site complete all as specified and as directed. |
| 23 | M&L complete removal of existing treatment and Preparation of Old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed. |
| 24 | S&F powder coated aluminium door and window shutter and frame any type (sliding or openable) and other similar work etc 60 micron section, fabricated by using the JINDAL / INDAL / HINDAL/ CENTURIAN sections including all necessary roller wheels for window, cleats, handle, door stoper, handle, locking arrangement,Mortice lockand arrangements to receivedglass/ prelaminated particle board with aluminium beading and stainless steel screw incl cost of rubber gasket beadings etc complete sealing between frame & wall with epoxy sealing compound. (The weight of rubber gasket beading will not be measured and paid, glass and prelaminated particle board will be measured and paid seperately) All sections as approved by GE |
| 25 | S&FPowder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standed aluminium frame of \"F\" section of size 23.4x15.3x1.4 mm thick all as per manufacturer\"s instructions complete all as specified and as directed |
| 26 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam colour PVC sheet on back face, including 20 mm thick PVC lining around all 4 edges of shutter,supplying & fixing in frame at site as per specification & drawing all as specified and as directed. |
| 27 | S&F Factory made 100% solid wood plastic (WPC) Decorative Door Frame, single rebate of size 75mm x 50mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum complete all as specified and as directed. |
| 28 | M&L 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminium frame work in cupboard shutters, partitions, shelves, pelmet boxes or narrow widths and similar work complete all as specified and as directed. |
| 29 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 30 | S&F butt hinges medium weightstainless steel 100 mmsize complete all as specified and as directed. |
| 31 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 32 | Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 33 | S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified and as directed. |
| 34 | S & F Aluminiumalloy wire mesh, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed withstainless wirestaples in repairs complete all as specified and as directed. |
| 35 | S & F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. |
| 36 | S&F 4mm thick sheet glass ordinary quality exceeding 0.5 sqm each pane complete all as specified and as directed. |
| 37 | S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed. |
| 38 | Dismantling / Taking out existing hessain base felt of any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing dust, dirt and washing the roof and removing the dismantled debris to a distance exceeding 200 m but not exceeding 3000m spread and levelled complete all as specified and as directed. |
| 39 | Providing 10mm thick plaster in CM (1:4) mixed with 3% integral water proofing compound over rooftop surface finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid seperately |
| 40 | M&L for applying evenly & priming with oil bound bituminius primer at 0.4Ltr per sqm for water proofing treatmentcomplete all as specified and as directed. |
| 41 | M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed. |
| 42 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 43 | M&L 25 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in roof for maintaining proper slope to avoid waterlogging all as specified and as directed. |
| 44 | M&L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in flooring/ hard standing complete all as specified and as directed. |
| 45 | M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm gradedstone aggregate) in subbase, plinth protections, finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 46 | Dismantling of stone slabs and tiles of any description or thickness in floors/dadoetc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 47 | M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like over cm 1:4 bedding, 10mm thick including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 49 | M&L Vitrified Ceramictiles light/dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors laid over & incl 15 mm thick screed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and as directed. |
| 50 | All as per item No. 46 but as in skirting /dado but fixed over 10 mm thick rendering over CM 1:4 complete all as specified and as directed. |
| 51 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 52 | M&Lcoloured Glazed ceramic tiles in vertical surfaces 300 x 200 x 7mm/ 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchover & incl. 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 53 | Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete all as specified and as directed. |
| 54 | S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in positioninc 20mm bore PVC float valve all as specified and directed in SSR Part-I complete all as specified and as directed. |
| 55 | Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia complete all as specified and as directed. |
| 56 | All as per item No. 52 abovebut 25 mm dia complete all as specified and as directed. |
| 57 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20mm complete all as specified and as directed. |
| 58 | All as per item No. 54 above but 25 mm dia complete all as specified and as directed. |
| 59 | S&F in repairs fancy type chromium plated 20 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 60 | S&F in repairWash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe (32 mm) but including waste fittings complete all as specified and as directed. |
| 61 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 62 | S&F PVC valveless, syphonic action type flushing cistern, lowlevel , white, with inlet ball valve, float and handle including brackets 10 litres capacity . |
| 63 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete |
| 64 | S&F in repair chromium plated two way bib cock15mm dia with wall flange in hindware Jaquar or equivalent in Parko/Kohler complete all as specified and as directed. |
| 65 | S&F in repair for hand shower (Healh Faucet), dia 8mm 1.2 mtr long flexible tube & wall hook. Make:Cat No. ALD-573, of Jaquar or equivalent in Parko/ Kohler complete all as specified and as directed. |
| 66 | S&F in repairs Soap dish, of material brass with glossy finish, Cat No. BA-45 of Prayag or equivalent complete all as specified and as directed. |
| 67 | S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 68 | S&F in repairsVitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader,pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. |
| 69 | S & F in repairs chromium plated 15 mm bore Push taps cast copper alloy high pressure screwed for iron/CPVC pipe for urinal complete all as specified and directed. |
| 70 | PVC Connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 71 | S&F inPVC (SWR) floor trap 75 mm, plain with CP grating including joining with solvent cement complete all as specified and as directed. |
| 72 | S&F Bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms) 32mm bore complete all as specified and as directed. |
| 73 | S&F in repair 20 mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron/PVC pipe complete all as specified and as directed. |
| 74 | S&F fancy type pillar taps, long neck, 20 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified. (Cat No 9204 of Prayag or equivalent of Jaquar/Marc) |
| 75 | S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange. |
| 76 | S & F Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 77 | Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 78 | M&L Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6 complete all as specified and as directed. |
| 79 | Taking down cement plastering at any description on brick or stone wall etcincluding rakingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. |
| 80 | M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 81 | M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coatsfirst coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with 3% integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately. |
| 82 | Supply only water proofing compound |
| 83 | M&L rendering 15 mm thick in CM 1:6 on concrete solid blockwall internalsurfacefinished even and smooth without using extra cement complete all as specified and as directed. |
| 84 | M&L Preparing new plastered ceiling surfaces and applying twocoat ofoil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling complete all as specified and as directed. |
| 85 | M&L Preparing new plastered wall surfaces and applying twocoat ofoil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed. |
| 86 | M&L complete removal of existing treatment and Preparing old plastered ceiling surfaces and applying two coat ofoil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on ceiling. |
| 87 | M&L complete removal of existing treatment and Preparing old plastered wall surfaces and applying two coat ofoil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed. |
| 88 | M & L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as specified and as directed. |
| 89 | M & L for preparation by complete removal of existing treatment of painted walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as specified and as directed. |
| 90 | M&L for preparation of steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth. |
| 91 | S& F in repair Ball brass valve, high pressure, with polythene floa thorizontal plunger type, IS-1703-2000 marked screwed to iron pipe or brass ferrule of size 25 mm bore complete all as specified and as directed. |
| 92 | M&Lfor providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates, chain etc incl welding, grinding, buffing, polishing, and making curvature (wherever required) and fitting the same with necessary SS nuts and bolts complete, incl fixing the railing with necessary accessories and SS - fasteners, SS bolts, etc of required size on the top of floor or the side of waste slab with suitable arrangement all as designed and complete all as specified and as directed. |
| 93 | S&F 12 mm thick toughened glass as in SS railing windows, partitions automatic doors and similar works incl cutting to shape drilling holes required complete all as specified and as directed. |
| 94 | S&F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittings and locking arrangements as per direction and specifications. |
| 95 | SPECIAL REPAIR OF BLDG NO P-219 AT INAS 339 AT INS HANSA.(E/M PORTION) |
| 96 | Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed |
| 97 | M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wiredrawn in and including PVC conduit medium grade of as required size (not less than 20 mm in width) ISI marked medium gradewith all accessories of same grade fixed concealed in wall including provision of modular metal flush box, modular cover plate with frame top cover for housing switch, socket, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed |
| 98 | All as per item No. 94 here in before, butfor one fan/exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed |
| 99 | All as per item No.94 here in before, but for one 3/5 Pin, 5 Amp Switch socket out leton the independent board complete all as specified and as directed |
| 100 | M & L for point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wiredrawn in and including PVC conduit medium grade of as required size(not less than 20 mm in width) ISI marked medium duty,with all accessories of same grade, fixed concealed in wall including provision of modular metal flush box, modular cover plate with frame top cover for housing mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed |
| 101 | Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed. |
| 102 | M & L for sub main wiring with two runs of single core 4 Sqmm FRLSCopper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non metallic rigid PVC conduit medium grade of as required size(not less than 20 mm in bore)with all accessories such as Tees, elbows,junction boxes etc, as required fixed concealed in wall along with one run of 2.5 Sqmm single core FRLSinsulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit) |
| 103 | S & F in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed |
| 104 | S & F in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed |
| 105 | S & F in repairsModular Socket outlet 2 in 1, 6 Amp, 240 volts,complete all as specified and as directed. |
| 106 | S & F in repairs Modular Socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 voltscomplete all as specified and as directed. |
| 107 | S & F in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 voltscomplete all as specified and as directed. |
| 108 | S & F in repairs Modular Fan step regulator, 120W - 2 modulecomplete all as specified and as directed. |
| 109 | Taking down unserviceable any type of Main Switch, DB\"s including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed. |
| 110 | S&F in repairs single pole and neutral enclosure with a2 pin and earth plug and socketcomplete with one MCB SP 20 Amps, 10 KA \"C \"series, 240 Volts complete all as specified and directed. |
| 111 | S & F in repairs MCB DB TPN 4 way DB 415 V with 200 A rated bus bar double door type complete all as specified and as directed. |
| 112 | S&F in repairs MCB DB SPN 4 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed. |
| 113 | S & F in repairs MCB TPN40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed. |
| 114 | S & F in repairsMCB SPN06 -32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed |
| 115 | S & F in repairsMCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed |
| 116 | M & L for Earthing complete with Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamberin cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed. |
| 117 | Taking down ceiling fan 1200/1400 mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pins, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws, nuts and washers etc and replacement of spare parts/ accessories such as ball bearings, gun metal bushes, capacitor, canopy top and bottom, shackle clip assembly, rewinding of fan motor, painting and including hanging/ fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed. (Note: - Spate parts will be measured and paid sepratelly |
| 118 | Supply only fan capacitor 2.5 / 3.15 mfd, 240 volts, 50Hz complete all as specified and directed. |
| 119 | Supply and fix in repairs only ball bearing suitable for ceiling fan/exhaust fan /air circulator/ pedestal fan any type. (Make: M/S SKF/NBC) all as directed. |
| 120 | Supply only shackle clip assembly with rubber bush reel and nuts, bolts and washers suitable for ceiling fan of any sweep complete all as specified and directed. |
| 121 | Supply only PVC canopy top and bottom with tighten screwsuitable for ceiling fan of any sweep complete all as specified and as directed. |
| 122 | Supply only split pin as per sample suitable for ceiling fan complete all as specified and as directed. |
| 123 | Supply only MS nut bolt with split pin as per sample complete all as specified and as directed. |
| 124 | Supply and fix down rodmade of MS pipe medium grade 15mm dia of 300/450/600 mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rodwith two coat of synthetic enamel paintover one coat of red oxide primer complete all as specified and as directed. |
| 125 | Supplyand fix copper conductor cable 3 core; 0.75 sqmm, PVC insulated, sheathed, flexible, multistranded,1100 volts grade for making connection to ceiling fan from ceiling rose complete all as specified and as directed |
| 126 | Material and labour for painting to ceiling fan of any sweep complete body, blades and down rod with two coat of synthetic enamel paint similar to match with existing colour after preparation of surfaces by using electric spray machineincluding marking of MES Number with black paint complete all as specified and as directed. |
| 127 | S & FEnergy efficient surface Mounted LED Luminire 20 watts 4\" long, 230 volt, 50Hz AC with acrylic cover aluminium exeruded body complete with all accessories incl necessary three core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed complete all as specified and as directed. |
| 128 | S & F in repairs receses/surface mounting lights 2\"X2\" LED flat panel 36 Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip,connector block etc.and necessaryfixing arrangementat any height and removing old unserviceable item complete all as specified and as directed. |
| 129 | S & F in repairs Energy efficient surface Mounted LED Luminire 10 watts 2\" long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr complete all as specified and as directed. |
| 130 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep suitable for 230 volt 50 hz complete all as specified and as directed. |
| 131 | PROVISION OF CABLING AND CONNECTION FROM 625 KVA DG SET TO H2 HANGAR (BLDG NO P-644) AND EJECTION SEAT BAY (BLDG NO P-671) NAY (GOA) |
| 132 | M & L in repair for heat shrinkable straight through joint for PVC/XLPE insulated armoured cable of size 300 Aqmm to 400 Sqmm 3.5/4 core complete all as specified and as directed. |
| 133 | Supply andlayingcable XLPE insulated Screened PVC bedded,galvanised steel strip or wire armoured,electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 120.0 sq mm 3.5 core complete all as specified and as directed. |
| 134 | Supply and layingcable XLPE insulated Screened PVC bedded,galvanised steel strip or wire armoured,electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 400 sq mm 3.5 core complete all as specified and as directed. |
| 135 | Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in hard / dense soil,getting out and levelling of bottom surface to required level for laying UG cable / errection of poles / pipes complete all as specified and as directed. |
| 136 | Excavation in trenches 1.5 Mtr wide and not exc 1.5 Mtr deep in soft / disintegrated rock getting out and levelling of bottom surface to required level for laying UG cable / errection of poles / pipes complete all as specified and as directed. |
| 137 | Excavation in trenches by cutting of road crossing /PCC hard standing, under boundary wallfor laying of pipe/cable complete all as specified and as directed. |
| 138 | Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata complete all as specified and as directed. |
| 139 | Removing excavated soil to a distance n.exc 50m, depositing where directedat a level n.exc 1.5M above the starting point complete all as specified and as directed. |
| 140 | Supply/ fillingdry river sand/m-sand in trenches for cable protection All as SSR Part I complete all as specified and as directed.NOTE : Punned thickness only will be measured & Paid |
| 141 | Supply and laying un-reinforced precast concrete cable cover LV type 1flate size 250 x 150 x 40 mm complete all as specified and as directed. |
| 142 | Supply and lay GI Pipe medium grade 100 mm bore for cable protection as a guard pipe including required accessories etc. complete as specified and directed. |
| 143 | M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate including use and waste of form work of concrete for any description incl preparation work is necessary all as directed. |
| 144 | M & L Earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground vertically earth pit not less than 2.25 mtr deep below the ground level with top to edge of the plate n. less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4mm as earthing lead by means of blots, nuts, check nut and washer of galvanized steel, includingnecessary earth work and excavation in any strata and PCC 1:3:6 type C2 chamber and RCC cover and light grade GI pipe 40 mm dia pipe of requiredlength for protection of GI wire and water funnel and wire mesh with GI pipe medium grade 20mm dia etc complete all as per electrical plate No 3 of SSR part - I and all directed including connections and testing on completion including dismantling old earthing. |
| 145 | M & L for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip size 20 x 3 mm thickby mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earthing strip shall be provided with GI pipe light grade 32 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamberin cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed. |
| 146 | Supply and Fix in onload manual change over switch 630 Amps , 4 pole , 415 V including sheet Steel enclosure confirming to IEC 60947-3, including mounting arrangement on angle lron frame complete all as specified and as directed. |
| 147 | Supply and Fix in onload manual change over switch 250 Amps , 4 pole , 415 V including sheet Steel enclosure confirming to IEC 60947-3, including mounting arrangement on angle lron frame complete all as specified and as directed. |
| 148 | PROVISION OF BACK UP POWER SUPPLY FOR AERPC HANGARS (P-430 BUILDING) AT NAY (G) |
| 149 | Supply and laying under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area95 Sq mm, 3.5 core, with aluminium conductor, ISI marked as per IS : 7098( Part-1) along with suitable size aluminium cable lugs, gland if required and jointed in any description complete all as specified and as directed. |
| 150 | Supply and fix or laying in trenches GItubing light grade for road crossing (for cable protection) of the 80 sizes complete all as specified and as directed. |
| 151 | M & L for Earthing complete with GI earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) filled with common salt and charcoal and connected to GI earth strip 32x 6 mm thick dia by means of GI nuts, bolts, & washers as shown in electrical plate No. 5 of SSR Part-I and Connected to earthing test point all as specified and including necessary PCC earth pit chamber of 1:3:6 and chamber cover of 50mm thick PCC 1:2:4 with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber filling of peddy field earth complete all as specified and as directed including demolish existing earth pit taking out old materials. |
| 152 | S & FMCCB DB VTPN, 6 way, prewireddouble door, with suitable busbar,and provision ofMCCB of upto 250 amps , 4 pole,415 volts without MCB complete all as specified and as directed |
| 153 | Supply and fix MCCB 4 pole 415 volts with adjutable type160 Amps with breaking capacity 35 KA complete including necessary connection with suitable size aluminum / copper cable lugs all as specified and as directed. |
| 154 | S & F LT Control panel board CPRI Approved, Indoor type, front openable door, One incomming compartment and one for alluminiumbusbar compartment and outgoing compartment having ,provision ofhaving oneincomming in MCCBswitch of 250 Amps, and each out going feeders connected to busbar,dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheetsuitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with alluminium bus bar of600 Amp rating for 3 phase and neutral4 wire system duly insulated incl necessaryconnections, common earth bus bar ofGI Strip 32 x 6 mm at bottom with panel board at oneearth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coatingin siemens grey colour and provision for the following incoming and out going (connected with busbar ) accessories all as approved andcomprising as under (for SFC Room 415 v) |
| 155 | Incoming :- a)MCCB 4 Pole,250 Amp415V - 01 Nob) Digital Volt meter 0 - 500V, size 96 x 96 mm square type with selector switch - 01 Set d) Digital Amp Meter 0 - 100 Amp, size 96x96 mm square type with selector switch- 01 Set.e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.g) Angle iron base frame as reqd size as per above panel, total leg height 900 mm and grouting in side PCC 150 mm legsand made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.h) M & L for necessary grouting as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 jobOutgoing :-a)MCCB 4 Pole, 160 Amp415V - 04 No |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
