Drinking Water And Sanitation Department has published Survey, Design And Construction Of Works Consisting Of Construction Of Source Work, Supplying, Carting, Laying & Jointing Of Rising Main By Welding, Clear Water Sumps / Top / Service Reservoirs, Supply / Feeder Main/Distribution System (G.I. Medium), Pump. Submission Date for this Tender is 20-01-2024. Sump Tenders in bageshwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Design (hydraulic & structural) and construction of RCC (1:1.5:3) Boulder filled Gallery 6 m length with intake chamberat sources, Diversioin of stream by any means to get working conditions at site execavation in any type of soil mix with shingle , boulder & rock up to required depth as per design. complete as per approved design & drawing including supply of all materials, cartage,labour, T&P etc. |
| 2 | Construction of RCCroughening Filter 1.0 mx1.0 m including supply of all material labour T&P etc compleas per type design |
| 3 | Design (hydraulic & structural) and construction of RCC Slow sand filter 3.m x 2.3m (0.06mld).as per IS : 10500 (2012) code for potable waterconsisting of two equal units including, Inlet Chamber, Outlet Chamberincuding required excavation, supply& filling of approved filter mediaas per IS code, supply and fixing pipes or making drain for proper drainage arrangement , MS pipes for connecting the units, painting, distempering and cement based paint all inside and outside offilter plant as directed by Engineer -in -Charge etc, all complete including necessary testing and free trail run or 6 (six) and successful commissioning of whole plants, supply ,cartage of all materials,labour T&P etc. |
| 4 | Survey & designon prescribed alignment and submit the design of rising main for checking the thickness of pipe before ordering for supply of pipe.On completion of this work, the laid length of pipe will be deemed eligible forsupply. The respective amount for quantity of surplus supply of pipes (which remained unlaid or unutilized) will be deducted from final bill and surplus quantity of pipes will be the property of contractor) supplying, carting, laying & jointing of Rising main of following size & thickness ofM.S. ERW(YST 210) Grade As per ISO 3183 : 2007 & IS 816 : 1969 incudingother appurtenant works such as fixing of air valve, sluice valve, reflux valve at suitable points, making scouring arrangement at suitable locations by fixing tee & scour valve etc. complete and also testing & commissioning of laid pipeline including supply of all materials, labour, T&P etc. complete. |
| 5 | M.S. ERW Pipe (YST 210) 65 mm dia., 4.8 mm thick |
| 6 | Painting ofERW Pipes both side with 2 coats of approved quality. (Anti-Corrosive paint over one coat of Primer) |
| 7 | Survey and design (The contractor has to survey the site, and submit the design ofGravitymainbefore ordering for supply of pipe).On completion of this work, the laid length of pipe will be deemed eligible for supply. Supplying, carting, laying & jointing of Feeder / Supply Main/Distribution main of following size of G.I. (Medium /Heavy) pipe confirming to IS 1239 Part I : 2004 including provision of specials and other appurtenant works such as fixing of air valve,Gate valves, sluice valve etc. at suitable points and also testing & commissioning of laid pipeline including supply of all materials, labour, T&P etc. complete. |
| 8 | 15 mm dia, G.I Medium class |
| 9 | 20 mm diaG.I Medium class |
| 10 | 25 mm dia, G.I Medium class |
| 11 | 32 mm dia, G.I Medium class |
| 12 | 40 mm dia, G.I Medium class |
| 13 | 50 mm dia, G.I Medium class |
| 14 | Excavation of earth for Pipe Line trenches Rising Main and Feeder / Supply Main / Distribution pipe line in following strata requiring the use of special T&P such as Pick Axes, Sabbals etc. or by blasting or by crow bars with a lift up to 1.5 m including refilling, watering and ramming of excavated earth into the trenches including supply of labours & all T&P etc. |
| 15 | Soil mixed with boulder and bajri |
| 16 | Medium Rock |
| 17 | Construction of M 30 grade R.C.C. semi-sunk circular sump / Service Reservoir of following capacity and other appurtenant works including supply of necessary scaffolding, shuttering and other accessories including fixing of inlet and outlet pipes, making bye pass arrangement & fixing of M.S. Manhole Cover, supply and fixing of M.S. Steel Ladder,as per approved design and drawing. (Design must submitted above 30 Kl capacity). Also including painting withplastic emulsion paint and also connection with the exsiting network alongwith carting of all materials labour, T&P etc. complete. |
| 18 | 4 KL |
| 19 | 10 KL |
| 20 | 45 KL |
| 21 | Design &testing bearing capacity of soil ,construction of Pump House of following size made up of Brick masonry with R.C.C.roof atpumping station, including painting with delux multi surface paint and other appurtenant works including construction of foundation of pumps and cable trench from transformer to pump house including internal electrification complete as per approved design & drawing including supply of all materials,labour, T&P etc. complete including cartage of materials |
| 22 | Pump House (Size 6 M x 5 M x 4 M) |
| 23 | Supply and installation of Bucket Type Chlorinator of 25 L Capacity on the top of Service Reservoirs |
| 24 | Provide all materials, labour, T & P for Construction of Full brick Boundary Wall 1.5 m high with 23cm x 23 cm brick masonry pillar every meter and 30 cm below ground level, with plaster in1:4 cement and sand mortar all over and three or more coats of acrylic smooth exterior paint complete at Intermediate Pumping Stations |
| 25 | Provide all materials, labour, T & P for Construction ofM/S Iron Gate 02 nos.with M.S. work in heavy size such as build up gates doors and frames withtwo nos. 2- brick thick brick masonryPillars 2.00 m high and 30 cm below ground level in 2 andbrick masonry over 10 cm thick PCC 1:4:8 ( 1 cement, 4 sand and 8 stone aggregate). Pillars to plastered all over in 1:4 Cement and Sand mortar , complete with two or more coats of syntheticenamelled paint over a coat of steel primer on steel work and acrylic smooth exterior paint for pillars.(Area will be excluding pillars) |
| 26 | Provision of Barbed Wire Fencing through angle iron posts of size 50x50x6mm and height of post 1.8m weight of wire not less than 9.38 kg per 100m and spacing of row 15 cm c/cbarbed wire shall be cross diagonaly of post around the water works site on the top of Boundary Wall as per specifications |
| 27 | Supply and fixing of following size of heavy duty Cast Steel Sluice / Scour / Gate Valve confirming to API 600 for Clear Water Rising Main including cartage of materials,labour T&P. |
| 28 | 65 mm dia. Cast steel Sluice, Valve, W.P. 15 Kg/cm2 |
| 29 | 65 mm dia. Cast steel Sluice Valve, W.P. 30 Kg/cm2 |
| 30 | 65 mm dia. Cast steel Sluice Valve, W.P. 50 Kg/cm2 |
| 31 | Supply and fixing of following size of heavy duty Cast Steel Reflux Valve (Swing Check Type) confirming to API 6D for Clear Water Rising Main including cartage of materials. |
| 32 | 65 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 15 Kg/cm2 |
| 33 | 65 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 30 Kg/cm2 |
| 34 | 65 mm dia. Cast steel Reflux / Swing Check Valve, W.P. 50 Kg/cm2 |
| 35 | Supply and fixing of following size of Air Valve confirming to API Standard including cartage of materials. For Raw / Clear Water Rising Main |
| 36 | 50 mm dia. heavy duty Cast Steel Double Orifice type WP 30 kg/sqcm |
| 37 | Supply and fixing of20 mm dia Air ValveSingle Screwedconfirming to IS 778 Class -1 for gravity main & distribution pipe lines. |
| 38 | Supply and fixing of following size of Wheel / Gate Valve as per IS 778 : 1997 & IS 14846 : 2000 for Feeder Main / Supply Main including cartage of materials. |
| 39 | 20 mm dia |
| 40 | 25 mm dia |
| 41 | 32 mm dia |
| 42 | 40 mm dia |
| 43 | 50 mm dia |
| 44 | Constructing masonry Chamberin brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve / Reflux Valve / Gate Valve / Air valve Chamber RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mmnominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 45 | Chamber 90x90x100 cm (inside) |
| 46 | Chamber 60x60x75 cm, (inside) |
| 47 | Construction of Anchor Block in R.C.C. 1:1.5:3 with necessary reinforcement along the alignment of Clear Water Rising Main including supply of all materials, labour, T&P etc. complete as per typedesign as per direction of engineer incharge including cartage of materials. |
| 48 | Size :- 0.60 m x0.60 m x 1.00 m |
| 49 | Excavation in All kind of soil for foundation for protection works of structures at various places requiring the use of special T&P such as Pick Axes, Sabbals etc. or by blasting or by crow bars with a lift up to 1.5 m and lead upto 30 m including refilling, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth upto a distance of 60 mincluding supply of all materials, labour, T&P etc. complete including cartage of materials |
| 50 | Cement concrete grade M 10 with 40 mm gauge stone ballast, local sand and cement in proportion of 6:3:1 in foundation ofprotection works at various places including supply of all materials, labour, T & P etc. complete |
| 51 | Cement concrete with 20 mm gauge stone ballast, local sand and cement in proportion of 4:2:1 in protection work and CC road etc. including supply of all materials, labour, T & P etc. complete |
| 52 | Random Rubble Stone Masonry in 1:6 cement and sand mortar for protection works of structures at various places including supply of all materials, labour, T&P etc. complete. |
| 53 | Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) with a 8 gauge BWG GI wire |
| 54 | Random Rubble Stone Masonry laid dry for protection works including supply of all materials, labour, T&P etc. complete. |
| 55 | Stage-II Centrifugal Pump (200 LPM, 370 M Head) |
| 56 | Electric Motor |
| 57 | Base Plate |
| 58 | Fully Auotomatic Auto Transformer Starter |
| 59 | Control Panel |
| 60 | Power Wiring & Earthing Material |
| 61 | Main Piping & Valves |
| 62 | Gauges |
| 63 | Tools |
| 64 | Rubber Resistance Sheet (1×2×0.025 M) |
| 65 | Installation & commissioning of Pumping Plants & related acceessories. |
| 66 | Testing :At Works |
| 67 | At Site |
| 68 | Painting |
| 69 | Carting |
| 70 | Maintenance (one year) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
