National Security Guard-NSG has published Tender For Up-Gradation Of Conference Hall Corridor With Wood-En Wall Paneling At Nsg Hq Palam, New Delhi.. Submission Date for this Tender is 18-01-2024. Wall construction Tenders in palam Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fixing at all height wall panelling with 12mm thick BWP Grade ply wood pasted and nailed with 6mm thick BWP grade 1 sided teak face veneer ply wood, both confirming to IS:710 (2010)(using water proof/ marine grade adhesive with each other), in required design/ pattern, including providing and fixing to frame work made of 50mm x 20mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete, required design & pattern as approved & as per direction of Engineer-in-charge. |
2 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
3 | Melamine polishing on wood work (one or more coat). |
4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
5 | Providing wood work in frames of archs, decorative wooden pillers,doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length i/c hold fast lugs or dash fastener as per design approved.Second class teak wood |
6 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
7 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm |
8 | Providing and fixing brass sliding door bolts, ISI marked , transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
9 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead . |
10 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of make Hindware model enigma sensor urinal with Complete Kit (Battery Operated) (Suitable For Urinal integrated sensor size 31x34x37 cm) as per approved make by Engineer-in-charge having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood of required design & pattern complete as approved & as per direction of Engineer-in-charge. |
12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately including stailess steel butt hinges, screws, all complete as per direction of Engineer-in-charge.35 mm thick shutters |
13 | Providing and fixing bright finished brass handles with screws etc. complete: 150mm |
14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
16 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats (One coat before putty & one coat after putty) |
17 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
18 | Credit on account of dismantled material received from work (dismentled material shall be the property of contractor & shall be removed from the site at his own expenses.Dismantled door shutters |
19 | Credit on account of dismantled material received from work (dismentled material shall be the property of contractor & shall be removed from the site at his own expenses. Dismantled pressed steel door frame |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail