Construction Of 5.40 Mtr. X 3.60Mtr. Size Switch Room With Sanitary And Water Supply Arrangement Incl. Plinth Protection At Head Work Site At Purana Bongaon W / S Scheme Bongaon Block Within The Jurisdiction Of Bongaon Sub-Division, Under Barasat Divis
Tender Value
5.60 Lakhs
Estimated cost
Bid Submission
30 Jan 2024
0 days left
EMD
11217
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
purana → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 5.40 Mtr. X 3.60Mtr. Size Switch Room With Sanitary And Water Supply Arrangement Incl. Plinth Protection At Head Work Site At Purana Bongaon W / S Scheme Bongaon Block Within The Jurisdiction Of Bongaon Sub-Division, Under Barasat Divis
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a) Depth of exacavation not exceeding 1500 mm. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc.layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation.a) With earth obtained from excavation of foundation. |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 5 | Cement concrete with graded stone ballast (40 mm size excluding shuttering) (1:3:6 proportion) In Ground Floor(A) Pakur Variety |
| 6 | Brick Workwith 1st class brick in cement mortar (1:6) a) In foundation & plinth |
| 7 | b) In Super Structure ground floor (1:4) |
| 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 9 | 40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures. [water proofing as per item no 9 and non toxic paint as per item no. 8 (b) of subhead C of Section \"C\" ] |
| 10 | Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately. (a)R.C.C. ventilator of 20 mm. thick, (i)Upto 0.10 Sqm. area |
| 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(a) Pakur Variety |
| 12 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm. nominal size) excluding shuttering & reinforcement, if any, in ground floor. As per IS 456-2000.(i) Pakur Variety |
| 13 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowec under 12 (e) for every 4 m or part thereof) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of E.I.C.i) Upto roof of ground floor. |
| 14 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. (i) Tor steel/Mild SteelCategory B:Other than SAIL / TATA / RINL |
| 15 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging wherenecessary (Ground floor).[Excluding costof chipping over concrete surface](i) With 1:6 cement morter.(b) 20 mm. thick plaster |
| 17 | © 15 mm. thick plaster |
| 18 | (ii) With 4:1 cement morter.(c) 10 mm. thick plaster |
| 19 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. |
| 20 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer\"s specification [Cement to be supplied by the Department] |
| 21 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary)and marble dust in proportion (1:2) including smooth finishing and rouhening of concrete surface and application of cement slurry before flooring works using cement @1.75Kg/sq.m. all complete including all materials and labour. In Ground Floor 3mm. thick topping(i) 25 mm. thick |
| 22 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be orreted upto three decimals) (e) Sal : Local |
| 23 | anel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)ii) 35mm thick shutters with 19mm thick panel size 30 to 45cm. b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak |
| 24 | Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs. with 50 mm iron Butt-hinge (i)Sal : Local |
| 25 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) a) 40mm x 6mm, 250mm Length |
| 26 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vii)100 mm. X 58 mm. X 1.90 mm. |
| 27 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 225mm long x 12mm dia. bolt. |
| 28 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 250 mm. long |
| 29 | Iron door ring of approved quality fitted and fixed with nut and washer complete.75 mm. dia. |
| 30 | Number plaque of building (plaque size up to 225 mm x 225 mm) made of sand cement plaster (1 : 2) on face of wall or plinth with 50 mm size letters P.W.D and the number of the structure formed thereon (in sunk type) including painting the letters and the number complete as per direction. |
| 31 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.(Two coats) |
| 32 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.In Ground Floor(a) One Coat |
| 33 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)a) Normal Acrylic Emulsion |
| 34 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (Add extra @ 1.2 % for each additional floors upto 4th floor and @ 1.5% for each addl. Floor above 4th floor.) b) Openable steel windows as per IS sizess with side hung shutters and horizontal glazing bars with/without fixed type ventilaors. [ The extra rate admissible for the openable portion only] |
| 35 | iv) Two point nose Alluminium handle including fitting & fixing |
| 36 | vii) Alluminium Peg stay 300mm long including fitting & fixing |
| 37 | viii) M.S. Integrated Grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S flats and bars. |
| 38 | Supply best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall and upto 6 m hight for external wall).i) 4mm thick |
| 39 | (a)Priming one coat on timber of plasteredsurface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 40 | (b) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 41 | Painting withbest quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. pn the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - [iv) Two coats (with any shade except white) |
| 42 | b) On steel or other metal surface: With super gloss (hi-gloss) -[iv) Two coats (with any shade except white) |
| 43 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C. fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer\"s specification and direction of Engineer-in-Charge. |
| 44 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.In ground floor. |
| 45 | Supplying, fitting and fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of Key stones (10 mm) fixed with araldite at the back of each tiles & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles i/c roughening of concrete surface, if necessary or by synthetic adhesive & frout materials etc. (A) Floor With sand cement morter (1:4) 20 mm. th. & 2 mm. th. Cement sturry at back side of tiles using cement @ 2.91 Kg/sq.m. and joint filling using white cement slurry @ 0.20 Kg/sq.m. (b) Area of each tiles above 0.09 sq m.(i) coloured decorative |
| 46 | B) Wall With sand cement morter (1:3) 15 mm. th. & 2 mm. th. Cement slurry at back side of tiles using cement @ 2.91 Kg/sq.m. and joint filling using white cement slurry @ 0.20 Kg/sq.m. (b) Area of each tiles above 0.09 sq m.(i) coloured decorative |
| 47 | Supplying, fitting and fixing PVC pipes of approved make of SOR 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (b) For Exposed Work PVC Pipes (Dia) 40 mm dia (For overflow) |
| 48 | 25 mm dia |
| 49 | 20 mm dia |
| 50 | 15 mm dia |
| 51 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. i) Double socket 3 mtr. length.110 mm. |
| 52 | ii) Door Bend (TS)110 mm. |
| 53 | iii) Door Tee110 mm. |
| 54 | iv) Vent Cowl110 mm. |
| 55 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With \"P\" trap (with vent) |
| 56 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 57 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe |
| 58 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (b) Anglo Indianii) Plastic (hallow type) white |
| 59 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity |
| 60 | Supplying, fitting and fixing bib cock or stop cock.(ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 61 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous hinaware of approved make in position with brassscrews on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm |
| 62 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand. (a) C.P. urinal flush pipe fittings range of one |
| 63 | Supplying fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing ISI making with fittings (tested to 21kg per sq.cm.)i) 20mm |
| 64 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cuttingtrenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete.A) UPVC Pipes:110 mm. Dia. |
| 65 | a) Plain Tee : 110 mm. Dia. |
| 66 | d) Shoe : 110 mm. Dia. |
| 67 | Labour for hoisting plastic water storage tank. (i) Upto 1500ltr. Capasity. (a) Upto 1st story from G.L. |
| 68 | Labour for loweringplastic water storage tank and stacking in places as directed. (i) Upto 1500ltr. Capasity. (a) Upto 1st floor from G.L. |
| 69 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement morter (1:4) including two 560 mm. dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted & fixed in the 100 mm. thick R.C.C. (1:1.5:3) top slab with necessary fittings 20 mm. thick cement plaster (4:1) with neat cement finish to the internal surface & 15 mm. thick cement plaster (4:1) to out side wall up to 200 mm. below G.L.floor finished with 25 mm. thick gray artificial stone over 100 mm. thick R.C.C. (1:1.5:3) bottom slab including supplying fitting & fixing all necessary specials, fittings, S.W. tees, C.I. footrest etc. including excavating earth in all sorts of soil, shoring, bailing out & pumping out water as necessary, ramming, dressing the ded and reffing the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chember & including constructing attached inspection pit as per approved drawing & connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.(i)For 10 users |
| 70 | Construction of circular soak well 2.5 m. deep in all types of sandy soils with dry brick work up to 1.6 m. from the bottom having 150 mm. intermidiate cement brick work (1:4) band allround & cement brick work (1:4) up to 0.90 m. from top with 20 mm. thick cement plastering (1:4) to insite face up to the depth of cement brick work, 15 mm thick cement plaster (1:4) on outer face from the top of the well up to G.L. & 6 mm. thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 m. of insite the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm. thick with cement concret (1:1.5:3) with stone chips with necessary rainforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted & fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, dewatering & removing the excess earth from the premises as per direction complete in all respect with all cost of labour & materials. With 250 mm. thick dry brick work & 250 mm. thick cement brick work (6:1) & 1 m. insite dia. |
| 71 | Add GST @ 18% |
| 72 | Add Cess @ 1% |
AI Tender Summary
Tender Timeline
Jan 11, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 01, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender