|
| 1 | Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all works upto plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone) aggregate 40mm nominal size crushed. |
| 3 | Providing and laying in position cement concrete of specified grade 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level. |
| 4 | Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level using crushed aggregate. |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size). |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M. |
| 7 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars. |
| 8 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size crushed stone aggregate |
| 9 | Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and PVC drain pipe ISI makes 100 mm diameter. ISI make complete as per standard design with FPS brcks. |
| 10 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Pan white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. |
| 11 | Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China wash basin size 400x400 mm with single 15 mm C.P. brass pillar taps |
| 12 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete semi rigid pipe 32mm dia. |
| 13 | Providing and fixing C.P. grating with hole of approved quality as directed by the engineer-in-charge site. Complete job |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS standards 15mm nominal bore |
| 15 | Providing and fixing C.P. brass angle valve for basin mixerand gyser points _of approved make conforming to IS : 8931.15mm nominal bore |
| 16 | Providing and fixing C.P Pillar cock.15mm nominal bore as directed by the engineer-in- charge site. Complete job. |
| 17 | Providing and fixing G.l. pipes complete with G.l. fittings andclamps, including cutting and making good the walls etc.15mm nominal bore (Medium) |
| 18 | Providing and fixing 1mm thick M.S. Steel door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer(using flats 30x6mm for diagonal braces and central cross place (Including Painting). |
| 19 | Filling empty cement bags with sand / earth, including cost of sewing andstrings etc. |
| 20 | Wiring for light point /fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 21 | Supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form work for :- |
| 23 | Foundations, footings, bases of columns. |
| 24 | Suspended floors, roofs, landings, balconies and access platforms. |
| 25 | Edges of slabs and breaks in floors and walls above 20cm wide. |
| 26 | Edges of slabs and breaks in floors and walls below 20cm wide. |
| 27 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
| 28 | Stone agg. / Screening / C. Dust / Sand for an avg. lead of 30 Kms. |
