Supply, Erection And Commissioning Of 05 No. 20 Cs. V.T. Pump ( Replacement / Capacity Increase ) Along With All Allied Accessories I.E. Motor, Panel, Cables Etc. At Beri-Khera Pump House In W.S. Mech. Sub Divn., Jind. , Works Details , Supply, Erection And Commissioning Of Axial / Mixed Flow, Water Lubricated, Vertical Turbine Pump Having Discharge Capacity Of 20 Cs. With Lift 16 Ft. With Y-Body Along With Bend With Operating Speed Of 960 Rpm Including 12 Mtr. ( 06 + 06 ) With M.S. Delivery Pipes With Both Side Bends With Support Of Suitable Thickness With Bituminous Based Paint Including Both Sides Flanges Welded, H.T. Nut And Bolt Complete In All Respects As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana. , Supply, Erection & Commissioning Of 100 Hp Fully Automatic Starter With Ats, 400 Amp. Mccb, Contactors, Microcontroller Based Protection Relay Cts With All Allied Accessories And With Suitable Capacitor Bank, Bus Bar, Push Button, Relay Button, Thimble Meters, Lugs Etc. In All Respect With Ms Channel ( 1 Ft Up From Floor ) With Latest Amendment Suitable For 20 Cs. Vt Pump All Allied Accessories With Compatible Cable Per Pumpfor Vt Pump Of 20 Cs. Capacity As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana. , Supply, Erection And Commissioningof 100 Hp, 3-Phase, 415 V ( +10% ) , 50 Hz ( +3% ) , 960 Rpm, 6-Pole Ie1 Tefc Continuous Duty Vertical Flanged Mounted Solid Shaft Squirrel Cage Induction Motor As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana. , Supply, Erection And Commissioning Of M.S. Delivery Pipe 445.2 Mm Inner Dia. ( In 06 Mtr. Length Of Each Pipe ) And Each Pipe End Welded With Flanges Made Of Thickness 08 Mm Ms Plate As Per Approved Specification And Made Including Ht Nut & Bolt, Rubber Sheet And Other Fitment Accessories Required As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana. , Providing 30 Ft. Deep Complete Double Side Plate Earthing With 2 Earth Pits On Both Sides Of Sump Well By Boring And Lowering 1.5” Gi Pipe, Filling Boring With Charcoal, Copper Strips, Salt & Fixing Base Plate, Connecting This Main Earthing Through Copper Strips / Wires Up To Motors And Panels As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana. , Supply, Erection And Commissioning Of Lt Cable 3.5 Core 185 Sq. Mm Aluminium Conductor, Xlpe Insulated, Armored Cable From Transformer To Distribution Box As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana. , Supply, Erection And Commissioning Of Motor Control Center / Ltd Panel As Per Ip-54 Of 400 Amp With Incomer Mccb Of 400 Amp, 4-Pole With 02 Nos. Outgoings For 100 Hp Ats Panelalong With An Additional Mcb Of 63 Amp For Lighting Loads, Indicators, Relays, Meters, Push Buttons, Bus Bars Complete In All Respectlikie Relays, Indicators, Timer Etc. Capacitor Bank Of Suitable Capacity With 4 Step Apfcr, Suitable Size Mccb, Selector Switch, Duty Contractors, Discharge Resistors, Digital Display Instruments & Other Allied Accessories For Automatic As Well As Manual Operation Of Capacitor Bank Suitable For 02 Nos. Motors Of Capacity 100 Hp As Per Design Of Motor Control Center With A Stand Of Ms Channel ( 1 Ft. Height From Floor ) And As Per Site Requirement And Technical Specifications Approved By I&Wrd Haryana.
