Tender For Repair To Misc Furniture Including Painting/Polishing Under Ge (Af) Bamrauli.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
29 Jan 2024
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bamrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Misc Furniture Including Painting/Polishing Under Ge (Af) Bamrauli.
BOQ
| Sl. No. | Item Description |
| 1 | Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 1.09):-(a)Removal ofexisting unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints.(b)Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO\"s Furniture Yard as directed by Engineer-in-Charge (From sl No 1.01 to 22.06)(c)All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg.(d)Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(e)M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surface smooth by sanding and grinding with standard workmanshipas directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda whereverrequiredbefore polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. |
| 2 | Table 3\"X2\"with / without Drawer (FD-55/284/283 or simillar ) :-Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 3 | Table Dining 4 Persons : (FD-273, 30 or similar type/MAP Drg):- Top for table dining table 4 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply)pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC. |
| 4 | Table Dining 6 Persons : (FD-273, 30 or similar type/MAP Drg):- Top for table dining table 6 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply)pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC. |
| 5 | Table Dining 8 Persons : (FD-273, 30 or similar type/MAP Drg):Top for table dining table 8 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply)pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC. |
| 6 | Table 3\"X3\"(FD- 88& 291or simillar):- Top for table 3\"X3\" made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 7 | Table writing (FD-33,275, DB-3982 or similar type) :- Top for table writing made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Ply/Archid ply duly pasted with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 8 | Table peg (FD-277/ 384, DB-3973):-Top for table peg made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Ply/Archid ply duly post -formedwith 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 9 | Table centre (FD-274 / 235):-Top for table centre made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Ply/Archid ply duly post -formedwith 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 10 | Teapoy (FD-278, 34, 382):-Top for table centre made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked(Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sideswith strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 11 | a)Anti-termite and anti-bug treatment shall be done before polishing the wooden items.b)M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanshipas directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda whereverrequiredbefore polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge.There should be atleast one day gap in each step during polishing.c) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE(AF) Bamrauliincluding BSO\"s Furniture Yard as directed by Engineer-in-Charge. |
| 12 | Table 3\"X2\"with / without Drawer (FD-55/284/283 or simillar) |
| 13 | Table 3\"X3\" (FD- 88& 291or simillar) |
| 14 | Table Dining 4 Persons (FD-273, 30 or similar type/MAP Drg) |
| 15 | Table Dining 6 Persons (FD-273, 30 or similar type/MAP Drg) |
| 16 | Table Dining 8 Persons (FD-273, 30 or similar type/MAP Drg) |
| 17 | Table writing (FD-33,275, DB-3982 or similar type) |
| 18 | Table Centre(FD-274 / 235) |
| 19 | Teapoy (FD-278, 34, 382) |
| 20 | Peg Table (FD-277/ 384, DB-3973) |
| 21 | Chair Easy |
| 22 | Chair Writing |
| 23 | Chair Dining |
| 24 | Sofa Set 5 Seater |
| 25 | Sofa Set 4 Seater |
| 26 | Charpoy GI pipe ply top (FD-220 & 220(R) |
| 27 | 12 mm thickplywood top BWP Grade(Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) as per existingshape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete AND 12mm x 6mm thick teak wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by Engr-in-Chg. . |
| 28 | MS Flat iron of size 40x5mm duly pinted with two coat of black colour synthetic enamel paint over a coat of red oxide primer to be fixed over the long rails equal to existing width of Charpoy including drilling holes suitably as directed by Engr-in-Charge. |
| 29 | Long rail of 32 mm dia Medium grade GI pipe including cutting and threading complete all As Specified and directed. (Make of Pipe: Tata/Jindal/JSL) |
| 30 | Short rail of 32 mm dia Medium grade GI pipe including cutting and threading complete all As Specified and directed. (Make of Pipe: Tata/Jindal/JSL) |
| 31 | leg of 32 mm dia Medium grade GI pipe including cutting and threading complete all As Specified and directed. (Make of Pipe: Tata/Jindal/JSL) |
| 32 | GI Elbow 3 way 32 mm dia medium grade ISI Marked complete all as specified and directedby Engr-in Chg. |
| 33 | Check nuts 32 mm dia complete all as specified and directedby Engr-in Chg. |
| 34 | Tighting of Charpoy GI pipe incl all parts long rail/ short rail/ legs through elbow and check nut in original position or as directed by Engr-in-charge |
| 35 | Bed Hard Steel(FD/E6/MAP/08( R) or similar drg) |
| 36 | Material and labourforfor in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWP Grade(Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) fixed on the top of bed plywood with screws fixed with existingmild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown indrawing and as directed . |
| 37 | Charpoy IP Hard top (FD/MAP-II/01or similar drg)) |
| 38 | M&L for in replacement ofplywood from Charpoy IP Hard top with new 12mm thick plywood top of size 1980mmx900mm BWP Grade(Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) fixed with existingmild steel GI bolts of 6mm dia of suitable lengths including washers and nuts all as specified in drg anddirected. |
| 39 | Poishing of various type of TP furniture with Duco Paint or equivalent by scrubing of top Melamine polish with water paper and applying two coat of duco paint with proper spray painting machine and gun to give it aesthatic or uniform look after applying two coat of Melamine polish either glossy or raft as required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap in each step during polishing. |
| 40 | Table Executive |
| 41 | Chair visitor wooden |
| 42 | Side unit |
| 43 | Pedastal with drawer |
| 44 | Table Peg with Glass top |
| 45 | Center table with Glass top |
| 46 | Corner Table with Glass top |
| 47 | Repair of sofa sets 05 seater (special / TP) |
| 48 | Material and labourfor in replacement ofunserviceable cloth Rexin upholstering from seat and back of sofa set of five seater (Special) with new material such Cloth Rexin of approved quality including 32 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model nameGoldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly Melamine polished on wooden surface from all sides completedirected.Note : Cost of cloth / Rexin shall not be less than Rs.500/-RM) and shade shall be as approved by GETrade pattern/ Godrej/ Methodex/Durrian complete all as specified and shown in drawing anddirected. |
| 49 | Repair of sofa sets Single seater (special / TP) |
| 50 | Material and labour for in replacement ofunserviceable cloth Rexin from seat and back of sofa set of Single seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model nameGoldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly Melamine polish on wooden surface from all sides completedirected.Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GETrade pattern/ Godrej/ Methodex/Durrian complete all as specified and shown in drawing anddirected. |
| 51 | Sofa Set 4/5 seater(FD-281, FD-258, FD-373, FD/MAP/06, FD/MAP-11/02) :- |
| 52 | Material and labourforin replacement of cushion cover made of tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing anddirected. |
| 53 | Material and labourforin replacement of cushion with 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model nameGoldline Plus of make :Kurlon) as per sample all as specified and shown in drawing anddirected. |
| 54 | Supply of Items as approved by Engr- In -Charge :- |
| 55 | Supply of Ahesive of One Litre Make -Marine fevicol |
| 56 | Supply of Touch Wood Make-Asian of 1 litre |
| 57 | Supply of Tarpetine Oil of 1 Litre |
| 58 | Supply of Thinner (no. 90 or 94) of 1 Litre of MAKE Duco |
| 59 | Supllyof Fancy Knob (as per sample) |
| 60 | Supply of Fancy Handle of Size 4 inch (as per sample) |
| 61 | Supply of Telescopic Channel of Size 14\" of Make Godrej,Hettich |
| 62 | Supply of Chair Hydraulic Gas Lift |
| 63 | Supply of lock for Almirah large Steel ( Make : Harrison/ Godrej/Hippo) |
| 64 | Supply of lock for Table Writing ( Make : Harrison/ Godrej/Hippo) (multiple lock for 3 drawers) |
| 65 | Multiple lock for 3 drawers ( Make : Harrison/ Godrej/Hippo) |
| 66 | Supply of LD 90 Number |
| 67 | Supply of OG Color Paint Make Asian or as approved |
| 68 | Supply of White Color Paint Make Asian or as approved |
| 69 | Supply of Black Color Paint Make Asian or as approved |
| 70 | Supply of Roll Paper 60 Number |
| 71 | Supply of Roll Paper 100 Number (Water Paper |
| 72 | Supply of Sky Blue Paint Make Asian |
| 73 | Supply of Sunmica of thickness 0.9mm as per approved sample of size 8ft x 4 ftas directed by Engineer -In- Charge. |
| 74 | Supply of Plain glass of size mirror 8mm of make Modiguard |
| 75 | Supply of Plain glass of size mirror 12mm of make Modiguard |
| 76 | Supply ofSulation Hetax of 250 ml |
| 77 | Nails No 17 |
| 78 | Nails No 20 |
| 79 | Star screw 3\" (200 In a pakcet) |
| 80 | Star screw 2.5\" (200 In a pakcet) |
| 81 | Star screw 2\" (200 In a pakcet) |
| 82 | Star screw 1.5\" (200 In a pakcet) |
| 83 | Star screw 20mm(1000 In a pakcet) |
| 84 | Star screw 12mm(1000 In a pakcet) |
| 85 | Nail 4\" |
| 86 | Chandras |
| 87 | Chapra (Shellac Gel) |
| 88 | Painting brush 2\" |
| 89 | Painting brush 3\" |
| 90 | Chip Beading 20mm |
| 91 | Chip Beading 25mm |
| 92 | Chip Beading 32mm |
| 93 | Chip bead half round 20 mm |
| 94 | Chip bead half round 25 mm |
| 95 | Chip bead half round 32 mm |
| 96 | Pre laminated particle Board 18mm/19mm exterior gde 8\"X4\" Make: Action Teesa / Century /Greenply/ Novapan (as per sample) |
| 97 | Plywood water proof 8\"X4\" 6mm (Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) |
| 98 | Plywood water proof 8\"X4\" 8mm(Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) |
| 99 | Plywood BWP 8\"X4\" 12mm(Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) |
| 100 | Supply and preparation of various parts of bed hard chair dining chair writing chair easy peg table and all other types of FD furniture articles in furniture yard as reqiured from Ist class teak wood (Shegun/ Assam teak) free from knots and well seasoned within permissible limit and as directed by Engr-In-Charge |
| 101 | Supply of Telescopic Channel of Size 12\" of Make Godrej,Hettich |
| 102 | Supply of MDF Board Exterior grade 18mm of size (8\"x4\") of Greenply/ Action Tesa/ Century as approved by the Engr in Charge |
| 103 | Recanning of various types of chairs |
| 104 | Material and labourforrecanning of wooden chair with plastic cane half round 2mm wide 0.35 mm thick (4mm wide semi round for border) best quality as per Godrej patternincluding removing of old cane , repairing of broken part with new one with first clas Teak wood including all wooden part and fillet of chair complete all as specified and directed. Make of cane : Premier/Ajay. |
| 105 | Material and labourfor re-caning of chair verandah with plastic cane half round 4mm wide 0.4mm thick, best quality,as per Godrej patternincluding removing of old cane complete all as specified and directed. Make of cane : Premier/Ajay. |
| 106 | Material and labour in replacement for worn out material ie PVC Seat & Back from chair verandah,and fixing suitable PVC seat for FD-256/359 of make M/S polymer or equivalent of weight not less than 1.83 kg per pair (seat & back) complete all as specified and directed. Make : AMCO or equivalent approved make |
| 107 | Material and labour for preparing of old surface of chair verandah steel and applyingone coat of synthetic enamel white paint including provision of 4 Nos rubber shoes for each chair complete all as specified and directed. |
| 108 | MS welding for any steel furniture point wise |
| 109 | Material and labour for preparation of old/new wooden surfaces of any descriptionby scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and polishing of furniture of approved quality with high gloss finish (Using Shellac gel/ Chandras/ or French polish as directed) completeall as specified and as directed.There should be atleast one day gap in each step during polishing.:- |
| 110 | Chair Easy |
| 111 | Chair Writing |
| 112 | Chair Dining |
| 113 | Table Dining 6 person |
| 114 | Table Dining 8 Person |
| 115 | Table Dining 4 Person |
| 116 | Peg Table |
| 117 | Sofa Set 5 Seater |
| 118 | Sofa Set 4 Seater |
| 119 | Side Board |
| 120 | Book Case |
| 121 | Table writing |
| 122 | Table 3\"X2\" With / Without drawer |
| 123 | REPAIR TO CHAIR DINING (FD/MAP) |
| 124 | Material and labour in replacement for unserviceable PVC seat of chair dining (Make- AMKO or as approved by GE) to be required shape & size all as per drawing and as specified and directed by the Engineer in Charge . |
| 125 | REPAIR TO CHAIR DINING with cushion(FD/MAP) |
| 126 | Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.300/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge |
| 127 | Repairs to various type of executive / revolving /computer chair |
| 128 | Material and labour in replacement for old unserviceable steel base of chair and supply and fixing of new Steel base make Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed. |
| 129 | Material and labour in replacement for old unserviceable fiber base of chair and supply and fixing of new fiber basemake Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed. |
| 130 | Material and labour in replacement for old unserviceable hydrolic of chair and supply and fixing of new hydrolicmake Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed. |
| 131 | Material and labour in replacement for old unserviceable arms of chair and supply and fixing of new arms make Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed. |
| 132 | Material and labour in replacement for old unserviceable wheel ofchair and supply and fixing of new wheel of make Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed. |
| 133 | Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with 32 density foam (as approved) alonwith plywood of seat and back of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed. |
| 134 | Material and labour for dry cleaning for cloathing, textiles and upholestry using a chemical solvent other than water after preparation of surface including repair andstichingto the followingfurniture itemsall over complete and as directed by Engr-in-charge in different location under the GE AOR . |
| 135 | Sofa 5 seater with cushion TP |
| 136 | Sofa 4 seater with cushion TP |
| 137 | Sofa 3 seater with cushion TP |
| 138 | Sofa 2 seater with cushion TP |
| 139 | Sofa single seater with cushion TP |
| 140 | Chair of various type |
| 141 | Repair of under mentioned furniture items will be carried out as follows:-(a)Removal ofexisting unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints.(b)Work will be executed where the furniture exist in different User Units/Md accns of GE (AF) Bamrauli including BSO\"s Furniture Yard as directed by Engineer-in-Charge.(c)All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam Teak) free from knots and cracks else specified in drg.(d)Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(e)Scrapping/Grinding will be carried out for renewal of existing dust, dirt, faded polish etc strictly as directed by GE/EIC, M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanshipas directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda whereverrequiredbefore polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. |
| 142 | CHAIR DINING |
| 143 | Rear legs as per drg |
| 144 | Front Leg as per drg |
| 145 | Seating Frame members front, back sides as per drg |
| 146 | Bottom/Centre stiffener as per drg |
| 147 | Back strip as per drg |
| 148 | CHAIR EASY, |
| 149 | Rear legs as per drg. |
| 150 | Front Leg as per drg. |
| 151 | Seating/back Frame members front, back,side rail as per drg. |
| 152 | Arm rest as per drg. |
| 153 | CHAIR WRITING |
| 154 | Rear legs as per drg |
| 155 | Front Leg as per drg |
| 156 | Seating Frame members front, back sides as per drg |
| 157 | Bottom/Centre stiffener as per drg |
| 158 | Arm rest as per drg |
| 159 | Back strip as per drg |
| 160 | REPAIRS TO ALMIRAH LARGE STEEL (ALL TYPES), FD-67M, 1031 &1033 :- |
| 161 | Material and labour in replacement for lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 162 | Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge. |
| 163 | Material and labour in replacement for door shutter of almirahlarge steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 164 | Material and labour in replacement for handle of almirahlarge steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 165 | Material and labour in replacement for leg of almirahlarge steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 166 | Material and labour in replacement for hinge of almirahlarge steel,mild steel, 100mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 167 | Material and labour in replacement for shelf of almirahlarge steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 168 | Material and labour for preparation of old / new paintedsteel surfaces (external and internal) and applying two coat of synthetic enamel paint byspray painting including preparation of surfaces and filling cavities with putty and primerwherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting. |
| 169 | REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE, FD-67M & FD-1032 :- |
| 170 | Material and labour in replacement for lock of almirah medium steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 171 | Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge. |
| 172 | Material and labour in replacement for door shutter of almirah medium steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 173 | Material and labour in replacement for handle of almirah medium steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 174 | Material and labour in replacement for leg of almirahmedium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 175 | Material and labour in replacement for hinge of almirahmedium steel,mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 176 | Material and labour in replacement for shelf of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge. |
| 177 | Material and labour for preparation of old / new paintedsteel surfaces (external and internal) and applying two coat of synthetic enamel paint byspray painting including preparation of surfaces and filling cavities with putty and primerwherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting. |
| 178 | Supply and fixing of Top of following items made out of 18/19mm pre laminated particle board exterior gde of Make: Action Teesa / Century /Greenply/ Novapan (as per sample)( including polishing ) ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick Teak beadingand (a)Removal ofexisting unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints.(b)Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO\"s Furniture Yard as directed by Engineer-in-Charge.(c)All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg.(d)Anti-termite and anti-bug treatment shall be done before polishing the wooden items. |
| 179 | Table dining 6 pers |
| 180 | Table dining 4 pers |
| 181 | Table centre |
| 182 | Teapoy |
| 183 | Table peg |
| 184 | Table 3\"X2\" With / Without drawer |
| 185 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
AI Tender Summary
Tender Timeline
Jan 10, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 29, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender