Tender For Supply Of Floor Model Stackable Envioronmental Shaker

Sharing tender

Tender For Supply Of Floor Model Stackable Envioronmental Shaker MAKE AND MODEL OF THE EQUIPMENT Specifications for Floor Model Stackable Envioronmental Shaker  Optional CO2 Control (Measuring range 0...20% CO2)  Rugged Magnetic Drive on Permanent Magnets. No Motor/ Belt or any unwanted moving parts  Facility of variable throw diameters of 3 mm / 6 mm / 9 mm / 12.5 mm / 19 mm / 12 mm / 25 mm / 50 mm / 70 mm on the same machine  Heavy Duty Stackable Environmental Shaker with a possibility of stacking up to 3 machines, without any stacking adapters or tools. Each machine on the stack should have the capability to run up to 400 - 500 RPM ( depending on the throw diameter ) or even upto 1000 rpm for Deep Well Plates. Humidity maximum : 85% rh at 25 – 55 O C  Humidity accuracy 1 % rh  Speed Range  20– 400 / 500 rpm with an accuracy of ± 0.1 rpm  Temperature range 22° C below RT to 80° C ; accuracy : +/-0.1° C.  Power of heating 800 w (resistance)  Power of cooling approx. 1 cooling 125 w / 2 coolings 307 w  Capacity Around 40 – 50 flasks of 250 ml / 20 – 25 flasks of 500 ml Humidity Minimum : 70% rh at 25 – 55 O C MAKE AND MODEL OF THE EQUIPMENT Specifications for Floor Model Stackable Envioronmental Shaker  Optional CO2 Control (Measuring range 0...20% CO2)  Rugged Magnetic Drive on Permanent Magnets. No Motor/ Belt or any unwanted moving parts  Facility of variable throw diameters of 3 mm / 6 mm / 9 mm / 12.5 mm / 19 mm / 12 mm / 25 mm / 50 mm / 70 mm on the same machine  Heavy Duty Stackable Environmental Shaker with a possibility of stacking up to 3 machines, without any stacking adapters or tools. Each machine on the stack should have the capability to run up to 400 - 500 RPM ( depending on the throw diameter ) or even upto 1000 rpm for Deep Well Plates.  Optional Humidity control  Complete machine made up of steel /stainless steel for easy cleanability and sterilization. NO plastic parts  IQ / OQ Documentation to be offered and Validation at site must be included.  Facility of interfacing the system to a PC for Programming, error Diagnostics and Calibration to meet GLP standards. Interfaces to be available for Local data acquisition / Enterprise level SCADA.  Anti Slip Mat to be included with the Machine. Clamps / holders to be offered under optionals. Facility of slow start / stop to avoid splashing, along with standard fast start / stop ( Interchangeable ). Auto stop on Door opening as as safety measure – which can be activated or De-activated as and when desired. Service center: Service center in Delhi –NCR. Detail should be provided.  Facility of slow start / stop to avoid splashing, along with standard fast start / stop ( Interchangeable ). Auto stop on Door opening as as safety measure – which can be activated or De-activated as and when desired. User list must be enclosed for the quoted model supplied to any other institute/Organization in Delhi and NCR. Unpacking and shifting of the instrument including manpower during installation must be in the vendor scope. Authorisation certificate from the OEM must be included in the technical bid Company must provide a compliance statement supported by technical literature and website. Instrument detail should be verify on Manufacturer website. AMC & CMC Charges for the next 5 years after standard warranty must be quoted in optional item Consumables required during installation to setup the new instrument must be quoted along with the instrument. Warranty 5 years including all spares , PM kit and calibrations of instrument on regular basis as and when required. Min.3 Customer satisfactory / performance certificate for specific quoted model from the end user should be included in the quote. Certificate for spare availability upto 10 years for quoted model to be provided from OEM alonwith the technical bid.