Military Engineer Services-MES has published Tender For Repair And Maintenance Of Lt Panel Boards, Feeder Pillar Boxes, Apfc Panels, U G Cables, Earthing, Street Lights, Dg Sets And Connected Works At 8.0 Hect Land And 0.3 Hect Land At Icgs Dahanu.. Submission Date for this Tender is 06-02-2024. Electrification Work Tenders in dahanu Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-02-2024 |
| Sl. No. | Item Description |
| 1 | M&L for prepartion of old paint with electrically operated spray machinesurfaces of LT panel/feeder piller box of any type outdoor/indoor including removing old paint with scrubing and applying two coats of synthetic emanel paint of shade as per existing over a coat of red oxide primer, complete all as specified and directed. |
| 2 | Supply and fix in repair MCCB 63 Amps,16 KA,415 volts,FP,50 Hz complete all as specified and directed. |
| 3 | Supply and fix in repair MCCB 100 Amps,16 KA,415 volts,FP,50 Hz complete all as specified and directed. |
| 4 | Supply and fix in repair MCCB4 pole 160 Amps,36 KA,415 volts,FP,50 Hz complete all as specified and directed. |
| 5 | Supply and fix in repair MCB 63 Amps,10 KA,415 volts,FP,50 Hz complete all as specified and directed. |
| 6 | Supply and fix in repair MCB 32 Amps,10 KA,415 volts,FP,50 Hz complete all as specified and directed. Make for Item No 2 to 6 :-Schneider/HPL/Legrand/Standard. |
| 7 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron strip of size 25x4 mmfrom earth electrodeto test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore eight grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value, completeall as specified and directed. |
| 8 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres belownormal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point provision of G I Pipe 25mm bore medium grade for protection of GI wire and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value, completeall as specified and directed. |
| 9 | Removing the old unserviceable cableafter disconnectingelectrical connections and supply,lay and testing LT cableXLPE insulated,galvanised steel strip armoured,1100 volts gradewith stranded aluminium conductor of cross-sectional area 35 sqmm; 3.5 core ISI mark, laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. Note for item No 9 to 13 :- (i) Excavation & Earth work,sand cushioning, cable cover and protection pipe shall be measured and paidseparately. (ii) The cable shall be in one length unless otherwise directed by the GE. (iii) Make for item No 9to 13 :- Havells/polycab/KEI/Finolex/Fort Gloster/Asian cables (RPG) |
| 10 | All as per item No.9 abovebut of size 25 sqmm,4core |
| 11 | All as per item No.9 abovebut of size 16 sqmm, 4 core |
| 12 | All as per item No.9 abovebut of size 10 sqmm, 4 core |
| 13 | All as per item No.9 abovebut of size 6 sqmm, 2 core |
| 14 | Supply and fixGI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any typeand the GI bracket pipe shall be fixed on wall/polesurfaces by providing suitable MSiron 25x4 mm clamps 2 nos of 25 cm long duly to the bracket pipe and painting to MS clampsand fixing with necessary suitablenuts,bolts & washers and removing of old unserviceable item complete all as specified and directed. Make of GI pipe:- Jindal/Tata/BST |
| 15 | Supply and fix FRPcable junction box, IP 66/67 protection, conceled in wall, weather proof for outdoor installationwith MCB SP 6 Amps,10KA ,"C"series,240V and two way connector complete with and including providing nuts, bolts etc suitable for fixing on PCC pole/ wall etc and including removing old unserviceable item complete all as specified and directed Make of looping box:- National/Sintex/Hensel Make of MCB :- Legrand/L&T/Seimens/Havells |
| 16 | Supply and fix LT Panel Board suitable for working on 3 phase, 4 wire, 415 volt AC 50 Hz outdoor type cubicle floor mounted free standing, dust and vermin proof, air ventillation, factory fabricated made out of 3.2 mm thick CRCA sheet powder coated.Panel shall have frontand rer opening , loacking arrangement and control wiring includingnecessary fixing arrangementscomplete all as specified and directed. Comprising of following :- TPN DB 4 way - 01 No, TPN MCB 32/40 Amps 01 Nos, MCB SP 10 Amps -10 No. Make of MCB:- Legrand/L&T/Siemens/Havells/ Schnieder |
| 17 | Supply and fix analogue time switch(Daily time switch) suitable for outdoor ,power contactor 63 Amps ML-2 type,3Phase,415 volts and MCB TPN 63 Amps,10 KA "C" series , including bus bar of suitable capacity with arrangement of auto/mannual control switch duly prewired and all accessories same shall be enclosed in andincluding sheet metal enclosure of 3.2 mm thick CRCA sheet of adequate size with powder coated, fixing arrangementson floor including powder coated painting and mounted on 50x50x6mm MS angle iron frame duly painting and shall be any CPRI approved manufacturer subject to approval of GEand including removing old unserviceable item complete all as specified and directed. Make of timer :- Legrand/L&T/GE Make of Contactor:- Siemens/L&T/ABB/Schneider/GE Make of MCB:- Legrand/L&T/Siemens/Havells |
| 18 | Removing the old unserviceable cableafter disconnectingelectrical connections and supply,lay and testing LT cableXLPE insulated,galvanised steel strip armoured,1100 volts gradewith stranded aluminium conductor of cross-sectional area 10 sqmm; 2 core ISI mark, laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed. Make :-Havells/Plaza/Polycab |
| 19 | Supply and fix LED flood light luminaire 120 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on street light poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. alongwith looping box comprising 6 amps MCB complete all as specified and as directed by Engineer-in-Charge. Make : Crompton Cat P No- LFLN-120-CDL/60-Mor equivalent make in Bajaj/ Phillips/ Syska |
| 20 | Supply and fix LED flood light luminaire 150 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. including removing old unserviceable items complete all as specified and as directed by Engineer-in-Charge. Make :Crompton Cat P No- LFLN-150-CDL/60-Mor equivalent make in Bajaj/ Phillips/ Syska |
| 21 | Supply and fix rigid non-metallic PVC conduit 25 mm dia medium grade including conduit accessories for encasing the cable from looping box to street light fittings on PCC poles/on wall surfaces as per site requirement with neccessary base saddles all as specified and directed. Make:-Finolex/Prince/Supreme/Precision/Dutron/Tirupati |
| 22 | Supply & fixing in repairs LED phase indicatinglamp R Y B colour as required at site in existing panel boards complete all as specified and directed. Make :-Schneider/HPL/Legrand/Standard |
| 23 | Supply and fix LED post top lantern light fitting 45 watt, pure polyester UV resistant , powder coated die cast aluminium housing and IP65 protection complete with all accessories including fixing arrangement on boundary wall pillar by providingGI pipe top on surface of boundary wall of suitable size and lengthas per site requirement and making good the disturbed portion ofcompound wall to match with existing surface completeall as specified and directed.Make :-WIPRO Cat part No LP07-201-XXX-57-CL or equivalent in Cromption/ Havells/Philips/Bajaj |
| 24 | Material & labour forpainting of LT PCC/Steel poleof any type with two coat of acrylic emulsion paint over a coats of primer including making alternate strips each of 30 cm height with black and yellow synthetic enamel paint upto 1.20 mtr height from top of PCC copping, complete all as specified and directed. |
| 25 | S&F cable jointing kit for 11 KV (earthed) grade cable for Indoor termination Kits, heat shrinkable type joint, complete with and including jointing material and accessories suitable for 3 core XLPE armoured aluminium cable of size 16 Sqmm to 35 Sqmm, also with and including connecting single thimbles etc after disconnecting of electric supply including removing burnt out jointing kit etc, complete all as specified and directed. |
| 26 | S&F cable jointing kit for 11 KV (earthed) grade cable heat shrinkable straight through, complete with and including jointing material and accessories suitable for 3 core XLPE armoured aluminium cable of size 16 Sqmm to 35 Sqmm, also with and including connecting single thimbles etc after disconnecting of electric supply including removing burnt out jointing kit etc, complete all as specified and directed. |
| 27 | Supply and lay GI pipe 50mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable itemcomplete all as specified and directed. Make:- Jindal/Tata/BST |
| 28 | Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for paymeny purpose. |
| 29 | Supply and laying unreinforced precast factory made concrete cable cover, class LV, Type -I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed. |
| 30 | Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all asspecified and directed. |
| 31 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 32 | Removing excavated soil not exc50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 33 | Material and labour for fault finding of HT/LT cables of any size and any length with fault detective machine by thumbing method and suitablevoltage and all as permanufactures instructions complete all as specified and directed. |
| 34 | Servicing of diesel engine generator set 10 KVA to 15 KVA of make Kirloskar Engine by carrying out inspection/checking of cylinder head assembly, piston system, piping system,cylinder liners, radiator function and cleaning thoroughly with cleaning agents and drain out the engine oil and filling up new engine oil including replacement of air filter, diesel filter, oil filter, bypass filter, CR element, CR plates, "O" rings etc and tappet calibration including replacing tapet cover gasket,tightening of all electrical & mechanical parts, greasing to all parts, testing for its working to achieve the requisite satisfactory performance, complete all as specified and directed. Note:- Engine oil will be measured and paid separately under relevant item of schedule as supply only. |
| 35 | Disconnecting of all rubber hoses and draining out the water fromchoked radiator assembly from the existingDG set of capacity 10 KVAto 15 KVAandtaking down the radiator assembly by unscrewing all mechanical connections from the existing position, opening the top and bottom covers of the radiator assembly, cleaning thoroughly the choked pipe of the radiatorby usingcleaning agents/caustic soda,cleaning of all the deposited sediments in the pipes/tubes including arresting of leakage by means of soldering/brazing and replacement of clamps, rubber hoses and AVM pads with suitablenuts, bolts and washers etc and fixing backin its originalposition and testingcomplete all as specified and directed |
| 36 | Supply and filling inhibitor corrosion (coolant additive concentrate) required for topping up, complete all as specified and directed. Make : Castrol/TVS/Servo. |
| 37 | Supply and toping up of acid mixture suitable for lead acid batteries of 12 volts, complete all as specified and directed. |
| 38 | Supply and toping up of distilled watersuitable for lead acid batteries of 12 volts complete all as specified and directed. |
| 39 | Supply and fix in repairs 02 Nos battery cable leads of multistranded copper conductor cable, heavy duty,PVC insulated & sheathed, each of 3 metres long, each of the cable fixed with 1 No terminal socket at one end and at the other end with brass lugs for self starter connection of the DG set, complete all as specified and directed. |
| 40 | Taking down unserviceable battery charger and supply and fix new automatic electronic battery charger 10 Amps, 12 Volts, including making electricconnections and to be housedinAMF panel complete all as specified and directed. Make : Maha mai / Span /Vinitech/NHP. |
| 41 | Supply and fix 12 Volts, 90 AH, maintenance free battery and connectingto DG set and testing after removing the old unserviceable items complete all as directed.Make:- Amaron/Exide express/AMCO |
| 42 | Disconnecting of electrical connections from the unserviceable self starter of 10 KVA to 15 KVA DG Set of any make/type and taking down self starter, carrying out repairs,overhauling,servicing of self starter including replacing the unserviceable parts such asbearing,carbonassembly, clutch assembly etc and other parts to make the self starter in serviceable condition, fixing back the self starter in its original position and connecting up all connections and testing complete all as specified and directed. NOTE FOR ITEM NOS. 42: Cost of all the materials, repairs and works to make the self starters functional except those considered under item Nos 09 to 10 shall be deemed to be included in the quoted rates of above items. |
| 43 | Supply only armature coilfor self starter of DG set 10 KVAto 15 KVA capacity complete all as specified and directed. |
| 44 | Taking down the unserviceable charging dynamo from DG set of capacity 10 KVA to 15 KVA of any make/model/type and thoroughly checking for carrying out repairs and cleaning with necessary cleaning agent and overhauling, lubricating of the same and replacement of parts such as bearings,bushes, field coil and other minor spares for making the charging dynamo serviceable,reconnecting and fixing back in original position and testing complete all as specified and directed. |
| 45 | Taking down the unserviceable turbo charger assembly after disconnecting the mechanical connections from DG set of capacity 10 KVA to 15 KVA of any make / type, opening and thoroughly checking for carrying out repairsof the turbo charger assembly and replacing the turbo charger repair kit andminor spares as required including calibrating, servicing for making the turbo charger functional and assembling and fixing back the turbo charger assembly to its original position andtesting. |
| 46 | Taking down the unserviceable water pump of DG set 10 KVAto 15 KVA, servicingand overhauling the water pump including replacing certain spares such as bearing, bushes, gaskets, nuts, bolts and washers etc for making the water pump functional, assembling and fixing back in its original position andtesting complete all as specified and directed. |
| 47 | Supply only engine oil of grade 15 W 40 for DG setsof any capacity complete all as specified and directed. Make:- Servo super/Castrol/Volvoline. |
| 48 | Drain out the fuel from the fuel tank of DG set10 KVA to 15 KVA capacity and keeping it in separate container, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank and cleaning the fuel tank both internally and externally by removing all the accumulated dust/sediments, carry out leakage testing of the tank and welding/brazing, and refixing the tank in its original position,replacing the drain plug and PVC pipe protected with flexible pipe,refilling back the drained out fuelinto the diesel tank and providing locking arrangement with 01 No Godrej pad lock, complete all as specified and directed |
| 49 | Supply and fix automatic voltage regulator (AVR),415 volts including all spares suitable for existing 10 KVA to 15 KVA DG set and connecting up all electrical connections and testing includingremoving old unserviceable items, complete all as specified and directed.Make :-Silicon/Stamford/Kirloskar |
| 50 | Supply and fix solenoid switch suitable for existing 10 KVA to 15 KVA DG set, connecting up all electrical/mechanical connections and testing includingremoving old unserviceable items, complete all as specified and directed. Make:Kirloskar/Cummins |
| 51 | Supply and fix in repair power contactorMN 45, 45Amps,415 Volts,50 Hz, complete all as specified and directed. |
| 52 | Supply and fix in repair DC Contactor MNO 40,complete all as specified and directed. |
| 53 | Supply only Digital type electronic auto mains failure controller (AMF)with inbuilt programmer and necessary control wiring, complete all as specified and directed. Make :-L&T/Siemens/Procom |
| 54 | Supply and fix in repair digitaltype Frequency meter, complete all as specified and directed.Make :-L&T/ AE/IMP |
| 55 | Supply and fix in repair digital type voltmeter, complete all as specified and directed.Make :-L&T/ AE/IMP |
| 56 | Supply and fix in repair digitalAmpere meter with CTs, complete all as specified and directed.Make :-L&T/ AE/IMP |
| 57 | Disconnecting and dismantling the fuel injunction pump of DG set of capacity 15 KVA of any make/type, duly isolating the fuel lines,opening and checking the pump, examining the delivery offuel lines including renewing PT pump, repair kit,servicing of FIP, also including calibration and testing, complete all as specified and directed. |
| 58 | Removing old unserviceable diesel pipes /oil pipesand supply and fix complete set of new diesel pipes and oil pipes suitable for existing 10 KVA to 15 KVA DG set,complete all as specified and directed. |
| 59 | Supply and fix self starter 12 volts, DC complete with all accessories suitable for existing15 KVA DG set and including necessary wiring, connections and testing and removing the unserviceable self starter, complete as as specified and directed. Make: LUCAS(TVS)/Autolake/Dewoo |
| 60 | M & L spray painting of silencer of 10 to 15 KVA DG Set capacity with two coat of black/silver synthetic enamel paint over a coat of red oxide primer after cleaning ,scrubbing and filling cavities complete all as specified and directed |
| 61 | Supply and fix LED street light fitting 36 Watt, made in pressure die cast housing with epoxy power coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting complete all as speified and as directed. Make :Crompton/ Bajaj/ Phillips/ Syska |
| 62 | Supply and fix in repair LED landscapelight fitting 10 watts cylindrcalshaped integral decorative with polycarbonate diffuser with IP66 protection complete with all accessories and internally prewired and includingnecessary fixing arrangement on PCC platform by providing GI bolts copmlete all as specified and directed Make:-Crompton/PHILIPS/ Bajaj/ Havells etc |
| 63 | Cutting of existing road, concrete/bituminous surface by using of mechanical method of any type complete all as specified and directed Note:-PCC for making goodroad surfaces shall be measured and paid separately) |
| 64 | Material and labour for PCC 1:3:6 type C1 using (20mm graded stone aggregate) for making good disturbed road surfaces and pole foundation including necessary use and waste of form work all as specified and directed. |
| 65 | Supply and fix integral LED aviation light luminaire comprising of 302 Nos LED complete with all accessories, prewired,aluminium housing with polycarbonate enclosurewith necessary arrangement onhigh mast light pole, Roof top of Aircraft Hangers and overhead reservoirs atany height by adopting saftey precautions and including removing old unserviceable item complete all as specified and directed. Make:-Bajaj catNo:BGAV302LED or equivalent of CG/Havells |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
