Grama Panchayat has published Tender For Materials For Kodumpidi Anganavadi Nirmanam Number 137. Submission Date for this Tender is 18-01-2024. Construction Material Tenders in Kottayam Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Stone Aggregate(single size): 40 mm nominal size |
2 | Stone Aggregate(single size):20 mm nominal size |
3 | Coarse sand (zone III) |
4 | Portland Cement |
5 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
6 | Vibrator (Needle type 40 mm) |
7 | Stone Aggregate(single size): 10 mm nominal size |
8 | wall form panel 1250x500 mm |
9 | Corner angle 45x45x5 mm 1.50 m long |
10 | 100 mm channel shoulder 2.5 m long |
11 | Double clip (bridge clip) |
12 | Single clip |
13 | M.S. Tube 40 mm dia |
14 | Stone for masonry work |
15 | Royalty for good earth |
16 | Solid blocks of size 30x20x20cm |
17 | Wall form panel 1250x450xmm |
18 | Corner angle 45x45x5 mm 2.50 long |
19 | Column clamp 450x1070 mm |
20 | Prop 2 m (2-3.5m) |
21 | Twisted steel/deformed bars |
22 | Structural steel such as tees, angles, channels and R.S. joists |
23 | Red oxide Zinc chromate primer |
24 | Adjustable span ESO+SI (2.35-3.40) |
25 | Adjustable telescopic prop 3 m (2.02-3.75m) |
26 | Beam clamp 300-380 mm (450-1070 mm) |
27 | Second class kail wood in planks |
28 | Second class kail wood in scantling |
29 | Hollock ballies 125 mm diameter |
30 | Solid blocks of size 30x20x15cm |
31 | Solid blocks of size 40x20x10cm |
32 | Fine sand (zone IV) |
33 | Anjili wood scantls |
34 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
35 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
36 | Bright finished or black enameled mild steel screws 40 mm |
37 | Bright finished or black enameled mild steel screws 20 mm |
38 | Anjili wood planks |
39 | 200 mm Aluminium aldrop |
40 | Iron hooks & eyes 100 mm |
41 | Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm |
42 | Bright finished or black enameled mild steel screws 50 mm |
43 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
44 | Mild Steel round bar above 12 mm dia |
45 | Flats up to 10 mm in thickness |
46 | Rawl plug 50 mm (designation 10 nos) |
47 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
48 | Vitrified floor tile 50x50 cm |
49 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
50 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
51 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
52 | Vitreous china pedestal type wate closet |
53 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
54 | Vitreous China orrisa type w.c. pan size 580 mm |
55 | 100 mm S.C.I. trap with vent heel |
56 | Vitreous china flat back wash basin 550x400 mm |
57 | 15 mm C.P.brass tap |
58 | C.P. brass waste 32 mm |
59 | C.I. bracket for wash basin and sinks |
60 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
61 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
62 | Brass bib-cock-15 mm dia |
63 | C.P. Brass angle valve 15 mm |
64 | Brass stop-cock 15 mm dia |
65 | PVC pipe 110 mm outer dia 6kgf/cm2 |
66 | PVC 45 degree Elbow 110 mm dia |
67 | PVC Socket/coupling 110 mm dia |
68 | PVC Tee 110x110x110mm dia |
69 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
70 | PVC pipe 40 mm outer dia. 10kgf/cm2 |
71 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
72 | PVC bend 63 mm dia |
73 | PVC Socket/coupling 63 mm dia |
74 | PVC pipe 75 mm outer dia 6kgf/cm2 |
75 | PVC vent cowl 75 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail