Tender For Construction Of Building At Health Sub Centre Kepars (Pilkhi) Under Bhilangana Block.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Jan 2024
0 days left
EMD
78000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ghansali → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Building At Health Sub Centre Kepars (Pilkhi) Under Bhilangana Block.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in rough excavation, banking excavated earth in layerscm in depth, breaking clods watering, rolling each layer with ½ ton or steel rammers, and rolling every 3rd and top-most layer with po 8 tonnes and dressing up in embankments for roads, flood banks,guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m. All Kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - -All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand: 10graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centring, shuttering,finishing and reinforcement - All work upto plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified gradecost of centring and shuttering - -All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Random rubble masonry with hard stone in foundation and plinth i levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sandaggregate 20mm nominal size) at plinth level with |
| 6 | Brick work with F.P.S. bricks of class designation 75 in foundationand plinth in Cement mortar 1:4 ( 1 cement : 4 coarse sand ) |
| 7 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats includi pipe 100 mm diameter and 1.20 m long complete as per standard |
| 8 | Brick work with F.P.S. bricks of class designation 75 in foundationand plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) |
| 9 | Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and string courses,fillets, columns, pillars, piers,abutments, posts and struts etc. uptofloor five level excluding cost of centring, shuttering, finishing and reinforcement in1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jambbutt hinges 2.5mm thick with mortar guards, lock strike-plate andas specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge |
| 11 | Brick work with F.P.S. bricks of class designation 75 in superstruct level upto floor V level in all shapes and sizes in 1:6 |
| 12 | Providing and fixing M.S. Tubular frames for doors, windows, ventilatorsand cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer |
| 13 | glass panes, with putty and nails wherever necessary float glass panel of thickness4mm |
| 14 | Structuralsteelworkinsinglesectionfixedwithorwithout c plate including cutting, hoisting, fixing in position and applying a pr coat of approved steel primer all complete. |
| 15 | P/F of position collapsible steel shutterwithverticalchannels 20x10x2mm and braced with flat iron diagonals 20x5mmwithtopandbottomrailofT-iron40x40x6mmwith40mm pulleyscompletewithbolts,nuts,lockingarrangement,stopp handles, including applying a priming coat of approved steel prime |
| 16 | Centring and shuttering including strutting,ropping etc. andremoval of form for Suspendedfloors,roofs,landings,balconiesandaccess platform. |
| 17 | Centring and shuttering including strutting,ropping etc. andremoval of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Centring and shuttering including strutting,ropping etc. andremoval of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 19 | Centring and shuttering including strutting,ropping etc. andremoval of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 20 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 21 | 12 mm cement plaster of mix in 1:6 (1 cement : 6 fine sand) in Smooth surface |
| 22 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 |
| 23 | 15 mm cement plaster on rough side of single or half brick wall fini floating coat of neat cement of mix 1:3 cement Fine sand |
| 24 | Filling available excavatedearth (excluding rock)in trenches, plin sidesoffoundationsetc.inlayersnotexceeding20cminde consolidatingeachdepositedlayerbyramming andwatering, up to 50 m and lift upto 1.5 m. |
| 25 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 grad finished with a floating coat of neat cement including cement slurry finished with a floating coat of neat cement including cement slurry the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate. |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 27 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeat all levels |
| 28 | Tile work in skirting, risers of steps and dado (up to 2 m height) ov mmthickbedofcement |
| 29 | Providingandfixingglassstripsinjointsofterrazo/cement floors. 40 mm wide and 4 mm thick. |
| 30 | 1:3:6(1Cement:3finesand:6gradedstoneaggregate 40 mm nominal size). In drin |
| 31 | Grading roof for water proofing treatment with cement mortor 1:3 (1cement 3 coarse sand) |
| 32 | 35 mm thickflush door shuttter including ISI marked Stainless Steel butt hinges with necessary screws. |
| 33 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 34 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Finishing walls with water proofing cement paint of required shade in 2 coad snowsem approved quilityApex |
| 36 | PaintingwoodworkwithDeluxeMultiSurfacePaintofrequired shade.Twoor more coat applied @0.90ltr/[email protected]/10sqm ofapproved brand or manufacture |
| 37 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. for using coloured W.C. pan instead of white W.C. pan including providing and fixing P.V.C. low level flushing cistern with manually controlled device. 10 litre capacity-coloured. |
| 38 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture. 100 mm diameter. |
| 39 | Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse Inside size 30x30x30 cm deep including C.I. cover withframe (light duty) 455x610 mm internal dimensions total weight of cover and frameto be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With F.P.S. bricks with class designation 75 with inside plastering 12 mm th of cement mortar 1:3 finished smooth with a floating coat of neat cement. |
| 40 | Providing and fixing G.I. pipes complete with G.I. fittings and clam cutting and making good the walls etc. Iinternal work - Exposed on wall.15 mm dia. nominal bore. |
| 41 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore. |
| 42 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15mm nominal bore. |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene w tank ISI : 12701 marked with cover and suitable locking arrangement tank ISI : 12701 marked with cover and suitable locking arrangem necessary holes for inlet, outlet and overflow pipes but without fitti base support for tank. |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32. White Vitreous China Wash basin size 630x450 mm with a pair of 1 pillar taps. |
| 45 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. |
| 46 | Providing and fixing mirror of superior glass (of approved quality) and of Rectangular shape 453x357mm. |
| 47 | Providing and fixing PTMT liquid soap container 109mm wide, 125 112mm distance from wall of standard shape with bracket of the s with snap fittings of approved quality and colours weighing not less than 105 gms |
| 48 | Providing lead caulked joints to spun iron or C.I. pipes and specialstesting of joints but excluding the cost of pig lead : 100 mm diameter pipe |
| 49 | Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia. |
| 50 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast. For 100 mm dia. Pipe |
| 51 | Providing and fixing gun metal gate valve with C.I. wheel of appro (screwed end) 25 mm nominal bore |
| 52 | Earth work in rough excavation, banking excavated earth in layerscm in depth, breaking clods watering, rolling each layer with ½ ton or steel rammers, and rolling every 3rd and top-most layer with po 8 tonnes and dressing up in embankments for roads, flood banks,guide banks or filling up ground depressions, lead upto 50 m and li |
| 53 | Random Rubble Masonary laid dry in breast wall,retaining wall, parapets,scupper etc. Including supply of all materials,labour,t & p& royality etc,required for proper complition of work.(As per PWD Uttarakhand specifications) |
| 54 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.(As per PWD Uttarakhand specifications) |
AI Tender Summary
Tender Timeline
Jan 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender