Housing Urban and Rular Development Government Departments Closing in 0 days TDR #41540804

Tender For Maintenance Work

Issued by Government Departments · nungambakkam, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Jan 2024
0 days left
EMD
9400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
nungambakkam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Maintenance Work - Special Repairs To Damaged Walls And Ceiling, Window And Other Repair Works In Dge Confidential Record Room Building At Dpi Campus, Nungambakkam, Chennai-06.

BOQ

Name of Work:Special Repairs to damaged walls and ceiling, Window and other repair works in DGE confidential Record room building at DPI Campus, Nungambakkam, Chennai-06
Sl. No. Item Description
1Renewing and fixing Mild Steel Grills for windows and ventilators etc., including the cost of mild steel angles, plates, rods, cost of welding charges and one coat of priming coat etc., complete.(The design should be got approved by the departmental officers.)
2Supplying and fixing of Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., complete complying with standard specification and as directed by the departmental officers at site of work.
3Renewing and refixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4\"brass butt hinges,2nos 6\"brass tower bolts,2nos 4\"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.
4Supplying and fixing of Zeebra blind made out aluminium alloy pelmet with necessary control unit with accessories etc., Fabric composition of 100% polyester with weight of 205 g + 5% per m2 fabrics are fire retardant against korea fire equipment inspection against korea fire equipment inspection corporation passed complying with standardspecification and as directed by the departmental officers.
5Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specification.
6Ground floor
7\"Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
8Clearing surface thoroughly with water and removing any loose plaster, flacks, fungus growth etc., by suitable mechanical means like scrapping or wire brushing and washing with adequate water to get and absolutely cleaned surface to take up further treatment. Then coating the exposed rods of beams and columns with “Nitro Zinc Prime base + Nitro Zinc Prime hardener” at 2.10 lt/10m2 and mixing the mortar with nitro bond SBR 3 liters per bag of cement finishing the columns and beams neatly with the above cement, chemical treatment with fine sand in the ratio of 1:3, 20mm thick including curing etc., complete complying with standard specification and as directed by the departmental officers.
9Stucco plastering 12mm thick using blue granite chips of size 10mmand below over the existing base plastering with cement mortar 1:5, 12mm thick, etc., complete complying with standard specifications (SI 314)
10Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
11Renewing and refixing the damagedaluminium anodized powder coatedmatt finish fully PLB partition with 63.50 x 38.10 x 1.28mm extruded box section at bottom, vertical and horizontal members.The vertical members are spaced at 80mm centre to centre to horizontal members are spaced at 0.80M, 1.60M and 2.40M height from the floor level.Panels should be covered with 9mm thick both side PLB exterior grade with necessary accessories like rubber beedings, aluminium clips, screws etc.The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 specificaitons for an average wall thicknessof not less than 15 microns.The rate is inclusive of cost of materials, conveyance, scaffolding charges if any required etc and necessary dismantling making holes in RCC (or) masonry works with power drill and redoing the same to the original condition after fixing the partition etc complete complying with standard specification and as directed by the departmental officers at site of work.
12Renewing and refixing the damagedaluminium anodized powder coateddoor fully PLB without frame Powder coated. Panels should be covered with 9mm thick both side PLB exterior grade with necessary accessories like rubber beedings, aluminium clips, screws etc.The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 specificaitons for an average wall thicknessof not less than 15 microns.The rate is inclusive of cost of materials, conveyance, scaffolding charges if any required etc and necessary dismantling making holes in RCC (or) masonry works with power drill and redoing the same to the original condition after fixing the partition etc complete complying with standard specification and as directed by the departmental officers at site of work.
13Painting two coats of newly plastered wall surface with ready mixed interior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
14Repainting the new iron work two coats of synthetic enamel paint of approved quality and colour and brand including thorough scrapping preparation of surface and finishing neatly etc complete complying with standard specification and as directed by the departmental officers at site of work.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
15Total in Figures

AI Tender Summary

OUR REF NO 41540804
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 12-01-2024
Authority
Authority Name Public Works Department
Work Description Maintenance Work - Special Repairs To Damaged Walls And Ceiling, Window And Other Repair Works In Dge Confidential Record Room Building At Dpi Campus, Nungambakkam, Chennai-06.
Basic Detail
Tender No TNPWD/17-13/204M/2023-2024
Bidding Type Tender
Location
City nungambakkam
State Tamil Nadu
Key Dates
Publish Date 09 Jan 2024
Submission Date 12 Jan 2024
Open Date 12 Jan 2024
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 9400
Exemption Not Available
Document List
089e012e-8dce-49be-8171-1648372c749b.html
BOQ_485319.xls
CONDITIONS13.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 09, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 12, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 12, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

089e012e-8dce-49be-8171-1648372c749b.html

xls

BOQ_485319.xls

pdf

CONDITIONS13.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender