Municipal Adminitration And Water Supply Department-MAAWSD has published Tender For Development Of Parks At Kodaikkanal Municipality. Submission Date for this Tender is 12-01-2024. Gardening Tenders in kodaikanal Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum ( DATA) |
| 2 | For footings |
| 3 | Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. DATA |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 5 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 7 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Foundation |
| 8 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 9 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification. |
| 10 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 11 | Supplying and laying Cobble Stone to required size as directed by the departmentalofficers of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 12 | Supplying and laying in flooring with fully polished Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm Thick laid over base layer of cement mortar 1:3 (one cement and three sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the departmental officers |
| 13 | Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Crushed Stone Sand (M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification |
| 14 | Providing and laying Tactile Paver Type of New Tek BT Yellow Colour Ceramic Tiles of size 305 x 305 x 15mm for Vision Impairment Person in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement (pwd sor p.no :40)25% added hilly area |
| 15 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 16 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 17 | Supply anddelivery of SWING TYPE SS MADE 100 Lit Capacity Mobile Garbage Bins shall conform to following specifications:-G• The material shall be heat and chemical resistant and shall be UV stabilized.The manufacturing process shall be Injection molding only as specified by EN 840-1 standard.The bins shall have suitable lid of HDPE Injection Molded at the top which shall be hinged on one side and open easily by gravity while unloading in refuse compactors.The bins shall have Nominal volume of 240 Ltrs.The bins shall have Two Solid rubber wheels of 200 mm Dia. (+-5 mm). Both these wheels shall be mounted on axle, which shall be corrosion resistant.The bins shall be provided with single piece pulling handle.The bins shall have deep and strong combs as per EN Standards. These combs shall ensure optimum accommodation on the lifting devices i.e. Refuse Compactors with Universal Bin Lifting mechanism.The useful load shall be min. 110 Kgs. As per EN standard.The color of the bins shall be Green/Blue/Grey/Yellow/Red and aesthetically pleasant in nature. |
| 18 | Supply and fixing of sprinkler system made ofsteel pipe and maximum working pressure 360 deg rotating wirh four arm rotating disc of 175 using some models are available corrosion resistance black pipe and copper pipe and also used plastic pipe cpvc and pexThree standardastmA53, astm A135, astm A 795 .SPARAYER HEAD 8 TO 16 Diameter space12-15 feet location are grid. Head requires 200 square feet. all complete complying with standard specification as directed by the departmental officer.... |
| 19 | Providing and fixing in position Precast Cylindrical Bollard of 200mm dia and of 1150mm height as per design, finish as perArchitect"s approval. The bollard is provided with Required reinforcements. The bollard is manufactured with cement concrete of M-20 grade by vibro compaction method using FRP/steel moulds, so as to achieve shuttering finish.The cost of item is complete including moulding charges, transporation, loading/unloading charges and labour complete. |
| 20 | Supply delivery of natural Pebbles filter media for Filter bed operation & sedimentary bore well of spherical in shape and allow even distribution in support bed with good flow.The media should be double washed, screened, kiln dried and classified into various sizes to meet specification including all incidental charges, conveyance, loading & unloading etc., as directed by the TWAD Board officers Size : 5 mm to 20mm TWAD SOR 2022-2023 P.NO .322 |
| 21 | Supply and Fixing of TICKET COUNTER made up of Stainless Steel with the dimension of 5m length, 2m width and 2.1m height with 4 SS poles and the corners, with the sloped roof of apex height 0.6m from the walls and roof covered with the 2mm Stainless Steel Sheet,and a coutertop opening of 4m length and 0.9m height in front side, and a door to be attached with the size of 0.9m width and 2.1m height, The countertop includes the switches of 5A, Socket and a Tubelight Fitting,etc., complete and as directed by the departmental officers. |
| 22 | For PRINCESS OF HILLS Aluminum Letters Supply and Fixing of Aluminum 24” Depth LED Letters with dimension of Width 50.25’ x height 12’ – 603 Sq.ft. 1.2 mm (18 Gauge) Aluminum 3D Letters with 0.40 Translucent Grades Acrylic Letters including all labour charges, Transportation and Installation within Tamilnadu etc complete as per technical specification and as directed by the departmental officers.(Q) |
| 23 | Manufacturing, Supplying and Fixing of Stainless Steel Sections for Elements using Square Hollow Sections( 73mmX73mm , 21mmx21mm, 48mmx48mm) and plates as per the IS Codes and the market availablity and as shown in the detailed drawings, MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges,transportaion etc. complete and as directed by the departmental officers. |
| 24 | ELECTRICAL WORKS 20W-36W (RGB) LED Projector/Floodlight Luminaire - Outer Beam structure Supply of RGB surface mounted Narrow/Medium beam Projector luminaire suitable for outdoor applications ofFacade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV andtemperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminousflux range 900-1600 Lm. Luminaire having DMX 512 control protocol capable of producing 16.7 million colour options.The luminaire should have options for various beam angles: 8°/15°/25°/35°/60°/30°x50°. Power consumption shouldbe between 45W to 55W at steady state full intensity. Power factor of the luminaire shall be more than 0.90.Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protectionshould be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass.Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. LEDs of CREE / LUMILED / OSRAM / SEOUL / SAMSUNG reputed make shall be used for the light fittings. Luminaire Shall be BIS approved. Cat. Ref. Bajaj BA FL series or equivalent 0.28kw |
| 25 | 45W-55W (RGB) LED Projector/Floodlight Luminaire - Outer Beam structure Supply of RGB surface mounted Narrow/Medium beam Projector luminaire suitable for outdoor applications ofFacade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminousflux range 2000-2200 Lm. Luminaire having DMX 512 control protocol capable of producing 16.7 million colouroptions. The luminaire should have options for various beam angles: 8°/15°/25°/35°/60°/30°x50°. Powerconsumption should be between 45W to 55W at steady state full intensity. Power factor of the luminaire shall bemore than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Thelumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours.Ingress Protection should be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink withproper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%- 90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted toilluminate desired structural elements. LEDs of CREE / LUMILED / OSRAM / SEOUL / SAMSUNG reputed make shall beused for the light fittings. Luminaire Shall be BIS approved. Cat. Ref. Bajaj BA FL series or equivalent |
| 26 | 45-55W (RGB) -1000mm Wall Washer/ Wall Grazing LuminaireSITC of 1000mm long RGB surface mounted Narrow/Medium/Elliptical beam luminaire suitable for outdoorapplications of Facade Lighting. Luminaires should be enabled with high power LEDs, should consists of highlyefficient, UV and temperature-resistant optics with symmetric distribution. Luminaire luminous flux range 2000-2200 Lm, Luminaire having DMX 512 control protocol capable of producing 16.7 million colour options. The luminaireshould have options for various beam angles: 8°/15°/25°/35°/10°x60°. Power consumption should be between 45Wto 55W at steady state full intensity. Power factor of the luminaire shall be more than 0.90. Luminaire should beprovided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of theLED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 orhigher. Housing should be made of Extrusion Aluminium. Impact resistance level should be suitable to site condition ofminimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : - 10°C to +50°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so thatthe light direction can be adjusted to illuminate desired structural elements. LEDs of CREE / LUMILED / OSRAM /SEOUL / SAMSUNG reputed make shall be used for the light fittings. Luminaire Shall be BIS approved. Cat. Ref. Bajaj |
| 27 | 10-15W/m Warm White LED Strip Supply of Mono colour Flexible Flat shaped LED strip suitable for indirect lighting effects for outdoor Facade. Stripshould be enabled with low power LEDs, High transparency silicone diffuser, anti-UV. Luminaire luminous range ofminimum 40-50lm/m(white). Beam angles: 120°. Power consumption should be 10W-15W at steady state fullintensity for 1m. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitableseparate non-integral power supply unit. Ingress Protection should be IP 66, impact protection of IK05. Housingshould be made of Silicon. Temparature range of -40deg. C to +55 deg. C; LEDs of NICHIA / CREE / LUMINOUS /OSRAM / SEOUL / SAMSUNG/Epistar or any reputed make shall be used for the light fittings. Luminaire shall be BIS approved. |
| 28 | Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. 3 core 95 sq.mm. armoured aluminium cable |
| 29 | DMX-512 Controller Supply of DMX Controller System with Standalone interfaces. Controller should deliver 2*512DMX channels, the controller should have future upgradation provision up to 4 DMX universe Port. the controller should have new Nicolaudie Stand Alone engine (NSA) offering some great possibilities (multi-zone, extended triggers, 16-bit channelsmanagement...). the controller should offer multiple possibilities to trigger your lighting scenes: time/date, inputports, TCP/UDP commands. Should have Intuitive backlit keyboard with 10 presets. PC DMX IN triggers:Yes,Standalone DMX IN triggers: External triggers: 10 buttons for direct access,2 buttons to change scene,+ 1 button tochange zone. 16 dry contact trigger ports via 20-Pin IDC Socket. Internal calendar: Yes, Backup of the internal clock:Yes, 3weeks without power, Memory card: Yes microSD card, 32GB max, Input power voltage: 5-5.5V DC 0.6A withpower adaopter working on AC power supply,. via USB(USB power supply included), Trigger lighting scenes using calendar triggers and conditional rules with New Stand Alone engine, using contact ports, RS232 or over Ethernet.Stand Alone mode with 99 scenes across 5 zones. Buttons: iPhone/iPad/Android remote and programming apps.Temperature: 0 to +50 C°, DMX Compatibility: 8 and 16 bit DMX fixtures, System Compatibility: Windows XP, Vista, 7,8, 8.1, 10, MAC OS X. Make: Nicolaudie/Pharos/Osram ECUE/Philips iColor (10.6 and +), Linux.: Make: Nicolaudie: SLESA-U11 |
| 30 | 2- Port DMX-Splitter cum BoosterSupply of DMX Splitter cum Booster ,Input Power- 100 to 240 VAC, auto-ranging, 50/60 Hz.,Housing ruggedalluminium, Operation Temperature -17ºC ~ +55ºC (0ºF ~ 131ºF) , 1 INPUT: DMX 3pin + 5pin XLR + 10A IEC-power, 2OUTPUTS: each with DMX 3pin XLR + 10A IEC-power each port should be optically isolated , Protection RatingIP20,Dimensions (cm): 13.0 x 13.2 x 5.6 cm including connection complete as required & Can be fitted with any standard truss clamp: easy installation. Make: Briteq |
| 31 | Supply and fixing of Rotary Handle for 400A/ 630A on suitablewith necessary internal connections for controlling the power plug (Electrical pwd sor 33) |
| 32 | Supply and fixing of 400A Spreader Terminal on suitablewith necessary internal connections for controlling the power plug (Electrical pwd sor 32) |
| 33 | Supply and fixing of400A Change Over Switch on suitablewith necessary internal connections for controlling the power plug (Electrical pwd sor 32) |
| 34 | Supply and fixing of 400A TPN Switch Disconnector Fuse Units in Sheet Steel Enclosure with HRC fuses Double Break (Electrical pwd sor 17) |
| 35 | Supply and fixing of 400APanel Board Fuse Units in Sheet Steel Enclosure with HRC fuses Double Break (Electrical pwd sor 55) |
| 36 | 9 Metre Length Single Bracket Pole with Base Plate(300 x 300 x 6mm)114.30mm OD x 5.40mm Thick x 5000mm Length, 88.90mm OD x 4.85mm Thick x 2000mm Length, 76.10mm OD x 3.25mm Thick x 2000mm Length PWD SOR P.NO 160 |
| 37 | Supply and fixing of 150W LED Street Light Fitting with LED (Philips/Havells) complete PWD SOR P.NO 115 |
| 38 | TURFING AND PLANTATION Supplying and filling of red soil for lawn area for plants including cost and conveyance of allmaterials to site including labour charge for all complete as per standard specification. |
| 39 | Providing Fym & Vermicompost for the planting including broadcasting etc., complete with all lead and lift and as directed by the engineer- incharge (All labour, materials, tools and plants etc., by contractor) |
| 40 | Application of termite control and pest control for planting works etc., complete with all lead and as directed by the engineer-in charge (all labour, materials, tools and plantsetc., by contractor) |
| 41 | Supplying and planting of Mexican lawn in & australian dipling method etc., Complete with all laboour, lead and lift and as directed by the engineer-in charge.(All labour, materials, tools and plants etc., by contractor) |
| 42 | Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification (5units / park) CCTV Camera |
| 43 | Network Video Recorder |
| 44 | Hard disc for NVR 4TB |
| 45 | 24 Port Patch Panel |
| 46 | Rack With Accesssories -3U |
| 47 | Armoured LAN & CCTV Cable |
| 48 | Led tv for display 48" |
| 49 | CONFERENCE TYPE PUBLIC ADDRESS SYSTEM, PROJECTOR AND MOTORIZED SCREEN - HIGHER END (PWD SOR PG 163) PA Mixer Amplifier 120W |
| 50 | Wall Speaker 15W |
| 51 | Cordless Mic UHF |
| 52 | 2 Core 1.5 sq.mm Shielded Copper Speaker Wire |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
