Tender For Improvement And Maintenance Works In Coimbatore District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jan 2024
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement And Maintenance Works In Coimbatore District Improvement And Maintenance Of Forest Road From Palamalai Check Post To Kunjurpathi To A Length Of Km 0 / 000 - 4 / 300 In Coimbatore District
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic solid not exceeding 150mm in thickness as per Technical Specification Clause 201. |
| 2 | Scarifyingthe existing damaged BT Surface / WBM up to 50mm deep including all labour charges for levelling and sectioning all other incidental charges as per standard specification etc complete., |
| 3 | WMM : Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in SubBase/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 4 | Prime coat: Providing and applying primer coat with bitumen emulsion (SS-I type) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 111, 112, 502 & 900 of MORTH Vth Revision- over WMM/ WBM |
| 5 | Tack coat- Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 111, 112, 503, 900 of MORTH Vth Revision - over granular surfaces treated with primer |
| 6 | Bituminus Macadam : Providing & laying Bituminus Macadamwith hot mix plant using crushed aggregates of specified grading premixed with bituminus binder (Viscosity Grade 30), transported to site, laid over a previously prepared surface with Paver Finisher to the required grade, level and alignment and rolled as per claused 501.6 and 501.7 to achieve desired compaction, complete as per clause 111,112,501,504 &900 of MORTH Vth Revision - Grading II (Table 500-7). |
| 7 | Providing and laying Tack coatover Existing BT Surface using0.200 kg ofBitumen Emulsion (RS-I type) per 1 sqm for preparatory to another bituminous Construction over it including cost of material, labour charges, rental for machinery, Fuel and all other incidental charges etc., completeas per clause503of MORTH Vth Revision |
| 8 | Bituminus Concrete (Table 500-17) : Providing & laying Bituminus Concrete with hot mix plant using crushed aggregates of specified grading premixed with bituminus binder (Viscosity Grade 30) at percentage specified by JMF of mix and filler transporting the hot mix to the work site, laing with a Hydrostatic Paver Finisher to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem Rollerto achieve desired compaction as per MORTH specification clause 507 complete in all respects - Grading II |
| 9 | Providing and Laying of Gravel inluding cost and conveyanceof the same to the work site from approved quarry including stacking of the sameto the departmental guage for pre - measurement including all labour charges for laying, spreading inluding all the hire and fuel charges for power roller for compaction etc., as directed by the departmental engineers for making up and low berms. |
| 10 | Providing RCC M15 grade precast KM stone of standard design as per IRC 8 -1980 and fixing in position incluidng painting and printingetc., complete (as per MORT&H specification No 804) |
| 11 | Providing RCC M15 grade precast HM stone of standard design as per IRC 8-1980 and fixing in position incluidng painting and printingetc., complete (as per MORT&H specification No 804) |
| 12 | Providing and erecting direction and place identfication retro-reflectorised sign as per IRC:67 made of high intensity grade sheet vide clause 801.3 fixed over aluminum sheeting, 200 mm thick with area not exceeding 0.90 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with means of M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 |
| 13 | Providing Metal Crash Barrier [ As per Highways Department Rate enclosed] |
| 14 | Providing Thermoplast [As per Highways Department Rate enclosed] |
| 15 | RoadMarkers /Road Stud with Lens Reflector |
| 16 | Providingandfixing of Retro-ReflectorisedcautionaryStar Sign Sticker StarSign made outof High IntensityPrismatic GradereflectiveSheetingstickedoverCR sheet0. 20mm /G 32 thicknesswithblackenamelpaint firmlyfixedonthetrees with11/2” Gx14wire nails of size100 mm x100 mm |
| 17 | Retro-ReflectorisedTrafficSigns (withdefinitionboard}Type- IV -Providing 90cm equilateraltriangle |
| 18 | Construction of Retaining Wall Ch.0/0-4/3 |
| 19 | Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton hard red earth shales, murram gravel stony earth and earth mixed with small size boulders as per SS20B for FOUNDATION OF RETAINING WALL |
| 20 | HGS |
| 21 | SDR |
| 22 | Plain Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for BASE COURSE OF RETAINING WALL |
| 23 | Plain Cement Concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for STEM AND BATTER PORTION OF RETAINING WALL |
| 24 | Providing and fixing Seepage Pipes of 100mm PVC pipes of required lengths for abutments and wings including cost and conveyance of all materials to worksite, cost and labour for 900mm dia semi-spherical backfill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing etc., complete. |
| 25 | Using of cut earth including removal satisfactory disposal of all materials necessary for FILLING BEHIND THE RETAINING WALL |
| 26 | White Washing one coat with Freshly Burnt White Shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges etc., complete. |
| 27 | CEMENT CONCRETE PAVEMENT 0/000 - 4/300 |
| 28 | Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton hard red earth shales, murram gravel stony earth and earth mixed with small size boulders as per SS20B for FOUNDATION OF CC PAVEMENTS |
| 29 | 70% O.G.S |
| 30 | 30% H.G.S |
| 31 | Plain Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for BASE COURSE OFCC PAVEMENTS |
| 32 | Plain Cement Concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for WEARING COAT OF CC PAVEMENTS |
AI Tender Summary
Tender Timeline
Jan 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender