New Delhi Municipal Council-NDMC has published Tender For Redevelopment Of Roundabout Landscape At Rml Hospital. Submission Date for this Tender is 17-01-2024. Landscape Tenders in New Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil work Part-A Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge All kinds of soil |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) ) |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note:Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level : Concrete of M10 grade with minimum cement content of 220 kg /cum |
| 9 | Providing and laying at or near ground level machine made/ ready made carved sunk and moulded red sand stone in edging/kerbs of required size and shape as per site conditions in position to the required line, level& curvuture jointed & pointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves alongwith matching pigment (thickness of joints except at sharp curve shall not to more than 5 mm) making drainage opening wherever required complete etc. as per direction of Engineer-in-charge. (length of finished kerb edging shall be measured for payment). Red sand stone kerb stone shall be approved by Engineer-in-charge). |
| 10 | Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern andncluding over 50mm thick compacted bed of coarse sand, filling the jointswith fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 11 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cementoncrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cementoncrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All above plinth level Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 14 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade Red sand stone |
| 19 | Red sand stone 30mm thick in risers of steps, toe wall clading, skirting, dado and pillars laid on 12 mm (average) thick cementmortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete |
| 20 | Providing and laying gang saw cut 30 mm thick, polished granite of required size and shape of approved shade, colour and texture in platform, copings and similar works, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per direction of Engineer-inCharge. With granite stone of colour black, cherry/ruby red |
| 21 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for wall lining, cladding and similar works of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing and curing complete at all levels.Granite stone slab of colour black, Cherry/Ruby red. |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 23 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 24 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical means, including loading ,transporting and unloading the same at any C&D waste management site within 25 kms lead i.e. Shastri park/ Burari/ Mundka including weighing at plant etc complete as per direction of Engineer in charge. Weighing and unloading at plant shall be as per procedures/rules of the plant management. The rates are inclusive of all operations, labours, lead and lifts from site of work to the C&D waste plant. The processing fee of C&D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by department on production of only original cash receipts. |
| 25 | Carriage of material Earth up to 5km |
| 26 | Electric work Part - B SupplyingandfixingoffollowingsizesofmediumclassPVC conduitalongwithaccessoriesinsurface/recessincludingcutting the wall and making good the same in case of recessed conduit as required. 25 mm dia |
| 27 | SupplyingandlayingoffollowingsizeDWCHDPEpipeISI markedalongwithallaccessorieslikesocket,bend,couplersetc. conforming to IS 14930,Part IIcompletewithfitting andcutting, jointingetc.intheexistingtrench,completeasrequired. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 28 | Supplying andfixing of25mmdia.BubblerStreamjetnozzlein ABSbodyasperdesigntoproducewatereffectfrom0.6-0.75 metre height ofas per entire instruction, direction and satisfaction ofEngineer-in-charge.Make-ColorDesignIndia/TeamWater Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 29 | Supplying,installationtestingandcommissioning of horizontal monosetsubmersiblePump Setandtotallyenclosedwaterfilled squirrel cage induction motor waterlubricatedwithoil seals with sleevesand thrustbearing havingall rotatingpartsdynamically balancedforsilent operation Suitable for threephase50HZAC supply as perdirection,instructionandentiresatisfactionof Engineer-in-charge., Motor Body : CI Pump Body : CI,Capacity : 7.5HPThreePhaseDischarge19LPS,Head12Mtr,Suction& Delivery 100x100mm, Make - Kirloskar/CG/KSB/Wilo |
| 30 | Supply&FixingwaterproofLEDlights36nos.led"sx0.5watts having in 18volt dc, color changing RGB made out of Saan top with ABS base body with protection class of IP-68. complete as per the direction & entire satisfaction of Engineer in charge. Make - Color Design India/Team Water Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 31 | Supplying and fixing of Flood Lights in 100 watt 220V AC, Warm White color (3000K), IP 66 rated, made out of pressure die-cast aluminium body including joints, connection complete as required. Make - Color Design India/Team Water Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 32 | SupplyingandLayingsubmersibleflat/roundcablesPVC insulated PVC sheathed copper conductor ofcompleteasper thedirection&entiresatisfactionofEngineerincharge.Make- Finolex/RR kabel/Polycab/Kalinga/KEI/ National 3 core x 6.0 sq mm size |
| 33 | 4 core x 2.5 sq mm size |
| 34 | SupplyingandMakingwaterProofjointofunderwatercables forsubmersiblecablecompleteasper direction, instruction and entiresatisfactionofEngineer-in-charge. Make-ColorDesign India/Team Water Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 35 | Providing and fixing G.I. pipes complete with G.I. fittings and including trenching and refilling etc extrnal work 80 mm dia nominal bore Delivery Lines |
| 36 | 25 mm dia nominal bore for Delivery lines |
| 37 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : |
| 38 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 39 | SupplyingandFixingofPVC BallValvecompleteasperper the direction and entire satisfaction of Engineer in Charge. Make - Prince/Supreme/SFMC/Astral 25mm (1") dia. Size |
| 40 | 50 mm (1") dia. Size |
| 41 | Supplyingandfixingof100mmdiaPVCButterflyValvewith EPDMrubberliningmatchingflangesandaccessoriescomplete shortpatternasrequiredasperperthedirectionandentire satisfaction of Engineer in Charge.Make - Harit/Prince/Audco/DRP /Supreme |
| 42 | Supplyinginstallationtestingandcommissioningofhorizontal monosetsubmersiblePumpSetwithtotally enclosed water filled squirrelcageinductionmotorwaterlubricatedwithoilsealswith sleevesandthrustbearinghavingallrotatingpartsdynamically balancedforsilentoperationSuitableforthreephase50HZAC supply as per direction, instruction and entire satisfaction of Engineer-in-charge.Motor Body : CI, Pump Body : CI, Capacity:0.5HPSinglePhase, Discharge 102 - 30 LPM, Head 12 to 18 mtr., Suction & Delivery 25x25mm , Make-Kirloskar/CG/KSB |
| 43 | Supplying installation, testing and commissioning of out door type panel enclosureshall be made out of16SWG CRCsheet ingrey colorandshallbefloormountedprovisionforSMPSetc.with following, Size 600 (W) x 600 (H) x 300 (D). (for 7.5 HP Pump - 2 nos.) (a) FP Isolator 63 Amp. 1.00 no. (b) DP MCB 20 A - 2.00 nos. (c) DOL Starters MK1 series for 7.5HP/3PH Pump - 2.00 nos. (d) Digital Time Switch with accessories- 2.00 nos. (e) Panel Stand - 1.00 no., Make-Kirloskar/CG/KSB |
| 44 | Supplying and fixing of 25 mm dia. Ball Joint for Geyser/Bubbler Stream jet nozzle in ABS body as per entire instruction, direction and satisfaction of Engineer-in-charge.Make-ColorDesignIndia/TeamWater Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 45 | Supply & Fixing adjustable stainless steel stand (SS-304) for LED lights 18 Watt with all accessories including nuts bolts complete as required complete as per the direction & entire satisfaction of Engineer in charge.Make-ColorDesignIndia/TeamWater Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 46 | Supply of DCC Master Control Device for LED Lights having Specifications:- * PIC based controller with master & slave communication protocol. * Push feature to lock any running colour chase to a fix colour. * 24 Pre Programmed colour patterns and Load Circuit-Inbuilt with accessories complete, Body -Plastic/PVC, Output Power - 12-18V DC,Make-ColorDesignIndia/TeamWater Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 47 | Supply and fixing of Power Supply/SMPSfor suitable to run LED Lights, Body - Metal Input Power - 220V AC, Output Power - 12-18V DC,complete as per the direction & entire satisfaction of Engineer in charge.Make-ColorDesignIndia/TeamWater Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 48 | SupplyingandFixingofUPVCpipesofconfirmingtoIS 4985:2000 including all UPVC fitting i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge. Make - Prince/Supreme/SFMC/Astral 100 mm (4") Pipe for Delivery Lines |
| 49 | 50 mm (2") Pipe for Inlet and Drain |
| 50 | Supplyingand100 mmdia. DebrisCollectionStainersinStainlessSteel304gradecompleteasrequired. All fixing to be done as per direction, instruction and entire satisfaction of Engineer-in-charge.Make-ColorDesignIndia/TeamWater Works/The Fountainers/H2O Pools/ KSR Brothers/Premiers/The Fountain Store |
| 51 | Supplying and fixing of 100 mm dia PVC Non Return Valve with matching flanges and accessories complete as requiredas per per the direction and entire satisfaction of Engineer in Charge. Make - Harit/Prince/Audco/DRP |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
