Repair Of Boundary Wall And Car Sheds On The Right Side Of Quarter No. D (S/S)- ½ At Bariniput Colony, Ukhep, Bariniput.Ukhep, Bariniput.
Tender Value
18.04 Lakhs
Estimated cost
Bid Submission
19 Jan 2024
0 days left
EMD
18047
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bariniput → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Boundary Wall And Car Sheds On The Right Side Of Quarter No. D ( S / S ) - ½ At Bariniput Colony, Ukhep, Bariniput.Ukhep, Bariniput.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning shurb jungles and small bushes & trees below 1.00m grith including all labour, T&P,sundries and labour cess etc complete and as per the directions of Engineer in charge. |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3mtr. height including stacking the usefulmaterials for reuse and removing the debries within 50mtr lead includingall labour,T & P, sundries,lead, lift, delift and labour cess etccomplete and as per the directions of Engineer in charge. |
| 3 | Dismantling GCI or AC sheet roofing after carefully removing the bolts & nuts including stacking of useful materials for reuse & removing the debries within 50m lead including all labour, T&P, sundries & labour cess etc completeand as per the directions of Engineer in charge. |
| 4 | Dismantling and removing 2.5cm. thick artificial stone flooring including stacking the useful materials for reuse and removing the debries within 50mtr leadincluding all labour, T&P, sundries and labour cess etc complete and as per the directions of Engineer in charge. |
| 5 | Dismantling and removingofM.S Gate (doors,windowsandventilators)including removal of fastenings& removing the debriswithin 50 mtrlead including all labour, T & P, sundries, and labour cess etc complete and as per the directions of Engineer in charge. |
| 6 | Earth work in hard soil or gravelly soil within 50m intial lead & 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and including cost of labour ,T&P sundries, and labour cess etc complete and as per the directions of Engineer in charge. |
| 7 | Fillingfoundation& plinthwith sand, well watered & rammed including cost,conveyance, royalty, T&P, sundries, lead, lift, delift and labour cessetccomplete and as per the directions of Engineer in charge. |
| 8 | Cement concrete (1:3:6) with 40mmsize HGCB metal including cost, conveyance, royalty,lead, lift, delift, all labour, T&P, sundries, labour cess and curing etc complete and as per the directions of Engineer in charge. |
| 9 | RCC work of M-20 grade with20mm size and down gradeblackhardgranitecrusherbrokenstonechipsincludinghoistingandlaying including cost, coveyance, royalty,T&P, sundries, alllead,lift, delift, labour, labour cess and curing etccomplete and as per the directions of Engineer in charge. |
| 10 | Supplying, fitting and placing uncoated HYSD bar TATA Tiscon Fe-500D/ SAILISI bar Reinforcement complete as per drawing and technical specification including cost, conveyance ,all labour, T&P , sundries, labour cessetc complete and as per the directions of Engineer in charge. |
| 11 | Rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including cost ofallmaterials complete including all labour, T&P, sundries, lead,lift,delift andlabourcess etc complete and as per the directions of Engineer in charge. |
| 12 | RCC foundation, plinth bandand footing bases of cloumns , mass concrete and precast RCC slab etc |
| 13 | R C C beams ,columns, girders and bressmers etc |
| 14 | RCClintel. |
| 15 | Random Rubble H.G. stone masonry in cement mortar(1:6)infoundation & plinthandsuperstructureincludingcost , conveyance, royalty, all labour,T&P, sundries, lead, lift, delift, labour cess and curing etc complete and as per the directions of Engineer in charge. |
| 16 | Brick work with fly ash brick23cmx11cm x8cm size having crushing strengthnot less than 75kg/sqcm with dimensional tolerance ±2% in cement mortar (1:6)in foundation & plinth and superstructureincludingcost,conveyance, royalties, all labour,T & P, sundries, labour cess and curing etc complete and as per the directions of Engineer in charge. |
| 17 | Cement concrete (1:2:4)for P.C.Cworks with 12mm size HGCB chipsincluding cost, conveyance , royalty, all labour, T&P,sundries, lead, lift, delift,labour cess and curing etc complete and as per the directions of Engineer in charge. |
| 18 | Fabrication and supply of \"Y\"- shaped post with MS-angle 50*50*5 mm ISA with provision of fixing hooks of8mm dia and 10cm long 4 nos per each postandfixingtheminpositionwithcementconcrete(1:2:4)using12mmHGCBchips including costofallmaterials, conveyance, all labour , T&P ,fabrication charges, sundriesandlabour cessandcuringetccompletebutexcludingcostof cementconcrete(1:2:4) and as per the directions of Engineer in charge. |
| 19 | Providing and fixing Aluminum based Zal colour coated super razor punched barbed tape (SRPBT) Helix coil fencing of 1050mm dia (before stretch ) Zal (SRPBT) Helix coil specification 1. Diameter of coil unstretched 1050mm ii) No of spirals per running meter iii) weight of each coil with hesian pack -14 Kg (± 0.50 Kg) iv) central core wire made from 2.60 meter dia GI High tensile wire as per IS 4454 galvanized as per IS :2629 v) Razor punched strip- razor punched tape is CONSEC- ZAL steel comprising with Aluminum based with Zinc alloy 150gm/sqm confirming to ASTM-A -792 m with additional primer treatment of epoxy/ polyurethane and final paint top coat of coulifield green shade (BSL-139) by hot dipping process, barb tape length 23.5mm, barb width-18.60 mm , barb spacing-36mm, center width 7.4mm, colour- coulifield green, (BSL-139) up to 3 mtr height of wall with existing angle Iron Y-shaped placed 2.4m or 3 m apart with 3 horizontal ZAL SRPBT horizontal runner strands (Specification) (i) Central core - wire - made from 2.6mm dia spring steel core wire of 1670 N/Sqm tensile strength as per IS 4454 and galvanised as per IS 2629, Razor punched strip- Razor punched tape each CONSEC-ZAL steel comprising of Aluminum based with Zinc alloy @ 150gm/sqm confriming to ASTM-A-792/ A-792 m with additional primer treatment of epoxy/ ployurethane and final paint top coat of coulifield green shade (BSL-139) by hot dipping process, razor punched barbed tape -23.5mm, (barb width 18.60mm ) barb spacing-36mm core width 7.4mm, colour - coulifield green, BSL-139 strand tied with GI staples and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to Iron angle all complete as per the direction of the EIC (DAR-2016(Vol-II) item-16.53, P-1011Unit =Permtr |
| 20 | Removing old lime or cement plaster from walls including racking out joints 12mm. deep and removing the debries within 50mtr leadincluding all labour, T & P, sundries,lead, lift, delift and labour cess etc complete and as per the directions of Engineer in charge. |
| 21 | 20 mm thick cement plaster (1:4) overstoneworkincludingcost, conveyance, royalty, all labour, T&P, sundries, labour cess and curing etc complete and as per the directions of Engineer in charge. |
| 22 | 16mmthick cement plaster in cement mortar (1:6) overbrick workincluding Cost,conveyance,royalties,all labour, T&P, sundries , labour cess & curing etc complete and as per the directions of Engineer in charge. |
| 23 | Providing, hoistingandfixingofdoubleleafM.SGateofsize3.00 mtr x 2.00 mtr approximateweight1.90QntlmadeupofMSangle & MSsquarebarsandwith1 mmthickGPsheetbodyatthebottomportionoftheGateuptoheightof1.00mtretccompleteincludingallcostofmaterials,labour,fabricationcharges,T & P,sundries, hoisting,fixinginpositionwithcement concrete(1:2:4)using12mmsizeHGCBchipsincludinglead, lift,delift andlabourcessetccomplete and as per the directions of Engineer in charge. |
| 24 | Priming one coat with red oxide primerofAsian /Berger / Shalimarmakeincluding cost of primer, brush, all labour, T&P, sundries, labour cess etc complete and as per the directions of Engineer in charge. |
| 25 | Painting two coatswith any approved enamel paintof Asian /Berger / Shalimarmakeincluding cost of paint, brush, all labour, T&P, sundries, labour cess etc complete and as per the directions of Engineer in charge. |
| 26 | Priming one coat to walls with wall cementprimer (ISI)including cost of primer water boundofAsian / Berger / Shalimarmake including all labour, T&P, sundries, brush, scaffolding,putty andlabour cess etc complete and as per the directions of Engineer in charge. |
| 27 | Paintingtwo coats to outside wallssurfacewithantifungalexteriorweathercoat paint ofapprovedshadeofAsian/Berger/Shalimar / Nerolac / Duluxoranyequivalent make onnew work to give an even shade atallheightincluding cost ofweathercoatpaint, brush, putty, all labour, T&P, sundries,scaffolding and labour cess etc complete and as per the directions of Engineer in charge. |
| 28 | Requirementandsupplyof M.S hollowsectionof crosssection 50mmx50mm having 2.5 mmthickincludingcost,conveyance,lead,lift,delift,alllabour,T &P, sundriesandlabourcessetccomplete and as per the directions of Engineer in charge. |
| 29 | Hoisting joists & trusses&placing in position including all labour, T & P, sundriesand labour cess etc complete and as per the directions of Engineer in charge. |
| 30 | Providing and fixing 0.47 mm thickTATA blue scopeDURASHINEsheet in roof with12 %overlapsincluding drilling holes in wind ties including fixing of ridges , valleys, including cost ofTATA blue scope sheet, J or L hook with bitumen washer , limpet washer etccomplete including cost of all materials, labour, T&P, sundries& labour cess etc complete and as per the directions of Engineer in charge. |
| 31 | Providing, fitting &fixingof 80 mmthickpaverblockinfloorsofapprovedmakelaidon20 mmthickcementmortar(1:4) (1 cement :4 coursesand)and fillingthejointswithslurry includingcost ofallmaterials, conveyance, royalty, labour,T & P, sundries, lead, lift, delift, labourcessandcuringetccomplete and as per the directions of Engineer in charge. |
| 32 | Fillinginfoundation&plinthwithexcavatedmaterialsincludingcostoflabour,T &P, sundriesandlabourcessetccomplete and as per the directions of Engineer in charge. |
| 33 | Lifting ofexcavatedearth &dismantledmaterials from the work siteto out sideof BariniputColonywithin 5 km awayby any mechanicalmeans&depositing the soil at a suitable dumping yardincluding cost of carriage, all labour, T& P, sundries and labour cess etc complete and as per the directions of Engineer in charge. |
AI Tender Summary
Tender Timeline
Jan 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender