Tender For Electric Work For Supply Installation Testing And Commissioning Of Fountains At Ancient Temple Wmda In Financial Year 2023-24.

Sharing tender

Tender For Electric Work For Supply Installation Testing And Commissioning Of Fountains At Ancient Temple Wmda In Financial Year 2023-24.- 1 Supply, Installation, Testing and Commissioning of 03 HP mono submersible pump sets, with steel mounting frame, grouting bolts, SS Screen etc. Make: Standard Make Pump Casing-Cast Iron. Impeller-Cast Iron.Shaft-SteelMotor Casing-Cast Iron. Make:Standard Make. 2 Design, Supply, Installation, Testing and Commissioning of Single dome (Al Ring Type) fountain(50mm x 15ft dia). The fountain is inclusive of heavy jets (80 No.) in a ring of 6mm dia foaming dome. The fountain is inclusive of fountain nozzles, manifold mounting gaskets, nuts and bolts, fountain both along with valves to adjust flow/pressure and necessary pipe work. Nozzles to be precision machined made of brass, gun metal and stainless steel or aluminum. The nozzles be jointed with the central pipes of each motor with the help of G.I Pipes including G.I. Bases to all the directions and filters with stainless steel Mesh complete in all respects as per the drawings/Site Requirement. 3 Design,Supply, Installation, Testing and Commissioning of Control panel comprises of a sheet metal enclosure with hinged front door, back wall mounting type with provision for incoming & outgoing cable entry. Electric panel shall be protected against duct and jets of water per rating IP55 and shall have been tested and certified as such by a Govt. of India Test Laboratory. Panel comprise of each motor main switch, contactors, switch fuse, MCB, push button on off switches, indicating lamps, capacitor, step down transformer, Sequencer for LED Lights etc. complete with internal wiring(Warranty Period for 1 years).Standard Make 4 Design, Supply and fixing of light mounting bracket, PVC joint box, cable jointing compound, nut bolts, washer, brackets, cable tie etc. of standard make 5 Supply, Laing, Testing and Commisioning of 2.5sq mm x3 core cable for pump connections and conducting arrangement including Excavation work. Standard Make. 6 Supply, Laying, Testing and Commissioning of 2.5sq mm x 4 core cable for lightconnection and conduting arrangement upto control room including Excavation work.Standard Make 7 Earthing of pump and panel with material & earthing wire, earth pit, earthing electrode complete in all respect.Standard Make 8 Supply, Installation, Testing and Commissioning of 21wx12v WPL 100 LED Light in noryl construction Waterproof luminaries with array of high output of LEDs housed in compact enclosure, with elastomeric seal. Special polyamide cable gland. Compact socket head fasteners and mounting bracket. The housing, top cover and bracket are in noryl construction, fasteners of stainless steel(Warranty Period for 2 years). Standard Make & shall be protected against duct and jets of water per rating IP68 and shall have been tested and certified as such by a Govt. of India Test Laboratory. 9 Supply, Installation, Testing and Commissioning of Outdoor Electrical Enclosure fabricated from 18 gauge MS sheet with hinged front door, back wall mounting type with provision for incoming & outgoing cable entry, 12 long legs made of iron angle with locking arrangements & provision for fixing of panel complete in all respect including cement concrete works. Standard Make 10 Supply/Excavation/Laying/Testing and Commissioning of 4 Core 35 mm sq. Al armored PVC cable withstand voltage of 650/1100V ISI Marked Standard Make. Including Supply/Laying of HDPE Pipe of 1.5 inches dia with ISI Marked. 11 Design/Supply/Installation/Testing and Commissioning of LT feeder panel (3+1) Al. bus bar (18x24x9) inches in size of cubical type vermin proper Single door lockable outdoor type fabricated out of 14/16 SWG MS Sheets powder coated weather proof, dust proof with IP 65 protection with 4 legs stand of 2.5 feet height/ground clearance properly grouted in Cement Concrete base, in 1:2:4 filter with baby insulators/glands/ thimbles suitable for use at 415 Volts 3 Phase,4 wire 50Hz system complete in all respects with following:-Incoming: 100 Amp-3 Phase, 4 pole 25K MCCB-01 No.Outgoing: 200 Amp Suitable Al. Bus bar