To Carry Out Necessary Road Safety Related Work Like Road Marking, Reflectors Etc. At Nagar Panchayat Besa-Pipla- 1 Supplying And Fixing Of Molded Shank Raised Pavement Markers / CatS Eyemade Of Polycarbonate And Abs Moulded Body And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face And Shall Support A Load Of 16000 Kg Tested In Accordance To Astm D 4280 Type H And Complying To Specifications Of Category A Of Morth Circular No Rw / Nh / 33023 / 10-97Do Iii Dt 11.06. 1997. The Height, Width And Length Shall Not Exceed 50 Mm, 100 Mm And 102 + / - 2 Mm And With Minimum Reflective Area Of 13 Sqcm On Each Side And The Slope To The Base Shall Be 35 + / - 5 Degree. The Strength Of Detachment Of The Integrated Cylindrical Shanks, ( Of Diameter Not Less Than 19 + / - 2 Mm And Height Not Less Than 30+ / - 2 Mm ) From The Body Is To Be A Minimum Value Of 500 Kg. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per ManufacturerS Recommendation And Complete As Directed By The Engineer.The Contractor Shall Submit A Two Year Warrantyfor Satisfactory Field Performance Including Stipulated Retro-Reflectance Of The Reflecting Panel, To The Engineer. 2 Providing And Fixing Of Median Marker That Are Made Of Tough, High Impact Resistant, Injection-Molded, Thermoplastic Body With An Isosceles Trapezoidal Structure Of Length, Width And Height Not Less Than 15Cm, 10Cm And 10Cm Respectively And Thickness Not Less Than 1.8Mm, The Body Structure Shall Be Rounded At Its Acute Angle, All The Corners And Edges. The Plastic Used For Molding The Median Marker Shall Have A Minimum Notched Izod Impact Strength Value Of 600 J / M At Room Temperature, When Tested In Accordance With Astm D256 And Shall Retain At Least 70% Of This Value When Subjected To Accelerated Weathering For 1000Hrs As Per Astm G155 Or Ul746c. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body In The Injection Molding Process. The Median Marker Shall Have Rectangular-Shaped, Fluorescent Yellow Color Retro-Reflective Sheeting Of Size Not Less Than 8.5Cm*8.5Cm And With Fully Reflective Micro Prismatic Cube Corners As Its Retro-Reflective Elements As Per Irc 67 2010 Andastm D4956 Type Xi Specifications Reflectivity Values. The Retro-Reflective Sheeting Shall Be One Or Both Sides Of The Median Marker And Shall Be Edge Protected With No Exposed Edges Which Will Prevent Edge Lifting, Vandalism, Sheeting Damage, Etc. The Median Marker Shall Be Fixed By A Combination Of Epoxy Adhesive And Grouting. 3 Providing And Laying Hot Applied Thermoplastic Road Marking Strip On Bituminous Surface Of Specified Shade / Colour Of 2.5 Mm Thick Including 1.5 Refractive Index Reflectorizing Glass Beads @ 250Gm / Sqm .Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc 35:2015. Initial Dry Reflectivity Rl Shall Be > 250 Mcd / Sqm / Lux Measured In The Initial 7 Days And Sustained Reflectivity Rl Of 100 Mcd / Sqm / Lux And Qd Of 100 Mcd / Sqm / Lux Measured At The End Of 2 Years By Means Of A Standard Reflectometer Of Zehntner, Easylux, Delta Make Capable Of Measuring Rl & Qd Both According To Irc 35:2015 Clause 15.5. The Finished Surface To Be Level, Uniform, And Free From Streaks And Holes Complete As Per Direction Of Engineer-In-Charge And In Accordance With Applicable Specifications. ( Refer Morth Clause 803 For Technical Specification And Performance For Irc 35:2015 ) . 4 Providing And Applying Cold Plastic Paint Two Component Rolled On Surfacing Material Solvent Free, High Build Two Pack Seamless, Tough, Skid Resistant, Material With Has Property Of Attaining 2.00Mm Thickness In Single Coat Application White ( Or As Required Colour ) Based On Glass And Colour Retaining Acralic Cross Linking Resin System For Coloured Road Surfacing Including Surface Cleaning And Cost Of All Material Etc. Complete. ( All Inclusive On Bitumen Or Concrete Surface ) Work Shall Carried Out As Per Irc 35-2015 Clause 2.2 ) 5 Providing Vertical Delineator Having Wide Angle Cube Corner Micro Prismatic Non Metallic Reflective Sheeting Confirming To Type Xi Of Astm D4956 -09With White Color And Red Color Combination And Having Minimum Of Retro Reflective Exposed Area Of 125 Sq Cm On Top Slots And 35 Sq Cm On Bottom Slots And No Edges Shall Be Exposed For Tampering. This Tubular Delineator Shall Have A Core And Shell Construction, Shell Shall Be Made Of Tough, High Impact Resistant, Injection-Molded, Thermoplastic Outer Body And The Inner Core Shall Consist Of Powder Coated Or Painted Mild Steel Of Minimum Thickness 1.0Mm.And Core-Shell Structure Shall Be Of Height Not Less Than 800 Mm Above The Ground And Width Not Less Than 80 Mm. The Metallic Core Of The Delineator Shall Extend 300Mm Beyond The Shell Length From Bottom For Installing In The Ground. The Extended Portion Shall Have Slots To Insert Anchoring Rods For Enhancing The Concrete Grip. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body In The Injection Molding Process. The Engineering Thermoplastic Used For Making The Delineator Body Shall Have Minimum Initial Mechanical Properties Of 600J / M Tested In Accordance With Astm D256 And Shall Retain At Least 70% Of These Minimum Initial Values When Subjected To Accelerated Weathering For 1000Hrs As Per Astm G155 Or Ul 746Cand As Per Irc 79 Specifications And Including Fixing The Unit In M20 Grade Cement Concrete Of Size 30X30x40 Cm Including Excavation For Pit. 6 Road Delineators:Supplying And Installation Of Delineators ( Roadway Indicators, Hazard Markers, Object Markers ) 80 To 100 Cm High Above Ground Level, Painted Black And White In 15 Cm Wide Strips, Fitted With 80X100mm Rectangular Or 75Mm Dia. Circular Reflectorised Panels At The Top, Buried Or Pressed Into The Ground And Confirming To I.R.C. 79 And The Drawings 7 Providing And Fixing Mandatory / Regulatory Sign Boards In Circular Shape Of ___Mm Diamade Out Of ____Mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Ofclass C ( Type Xi Micro Prismatic Grade Sheeting ) Having Pressure Sensitive / Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3 Supported With Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Ofm. S. Angle Iron Post Of Size65 Mm X 65 Mm X 6 Mm, 3.45 M Long, Duly Paintedwithwith Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.I. Fixtures Etc; Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc; Complete. Class C ( Type Xi Micro Prismatic Grade Sheeting ) Shall Have 10 Years Written Warrantyfrom The Manufacturer And Authorised Distributor / Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificatein Original Should Be Submitted To The Engineer In Charge By The Contractor / Supplier. [ D. 750 Mm Diamade Out Of4mm Aluminum Composite Material ] 8 Providing And Fixing Cautionary / Warning Sign Boards In Equilateral Triangle Size Of _____ Mmmade Out Of ____Mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Ofclass C ( Type Xi Micro Prismatic Grade Sheeting ) Having Pressure Sensitive / Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3 Supported With Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Ofm. S. Angle Iron Post Of Size65 Mm X 65 Mm X 6 Mm, 3.45 M Long, Duly Paintedwithwith Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.I. Fixtures Etc; Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc; Complete. Classc ( Type Xi Micro Prismatic Grade Sheeting ) Shall Have 10 Years Written Warrantyfrom The Manufacturer And Authorised Distributor / Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificatein Original Should Be Submitted To The Engineer In Charge By The Contractor / Supplier. [ D ] . 750 Mmmade Out Of 4Mm Aluminum Composite Material ] 9 Providing And Fixing Cautionary / Warning Sign Boards In Octagone Size Of ______ Mmmade Out Of ____Mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Ofclass C ( Type Xi Micro Prismatic Grade Sheeting ) Having Pressure Sensitive / Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3 Supported With Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Grey Stove Enamel Paint And Supported On One No. Ofm. S. Angle Iron Post Of Size65 Mm X 65 Mm X 6 Mm, 3.45 M Long, Duly Paintedwithwith Flat Oil Paint Having Alternate Black And White Bands Of 25 Cm Width Including G.I. Fixtures Etc; Fixing The Boards In M25 Grade Concrete Block Of Size 60Cm X 60Cm X 75Cm Including Transportation Etc; Complete. Class C ( Type Xi Micro Prismatic Grade Sheeting ) Shall Have 10 Years Written Warrantyfrom The Manufacturer And Authorised Distributor / Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificatein Original Should Be Submitted To The Engineer In Charge By The Contractor / Supplier. [ 900 Mmmade Out Of4mm Aluminum Composite Material ] 10 Providing And Fixing Of Retro- Reflectorisedinformatory Sign Board Rectangular / Square In Shape Having Area Greater Than 0.9 One Square Meterr Made Out Of___Mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Ofclass __ ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3, Supportedwith Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Two Coats Of Grey Stove Enamel Paint And Supported On Two No. Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm, 3.5 Mt Long Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M25 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm, 60 Cm Below Ground Level As Per Approved Drawing The Angle Iron Postshall Be Duly Painted With One Coat Of Epoxy Primer And Two Coats Of Epoxy Finish Paints Having Alternate Black And White Bands Of 25 Cm Width Including Gi Fixures And Transportation Etc.Complete.The Nut Bolts Of Board With Angle Iron Post / Supporting Structure After Fixing At Site Has To Be Electrically Welded. Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Sheeting Shall Have 7 Yearswritten Warrantyfrom The Manufacturer And Authorised Distributor / Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificatein Original Should Be Submitted To The Engineer In Charge By The Contractor / Supplier. [ B. 4Mm Aluminum Composite Materialofclass B ] 11 Providing And Erecting Overhead Signs Made Out Of___Mm Aluminum Sheet Bonded With White Retro Reflective Sheeting Of Class__ ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Having Pressure Sensitive / Heat Activated Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012, With Designed Back Support Frame Of Mild Steel Angle With Vertical And Lateral Clearance Given In Clause 801 And 802, Duly Painted On Back Side With Two Coats Of Grey Stove Enamel Paint And Installed As Per Clause 802.6 Over A Designed Support System Of Structural Steel Work Trestles And Trusses Of Sections And Type As Per Structural Design Requirements And Approved Plans Including Painting With One Coat Of Epoxy Primer And Two Coats Of Epoxy Finish Paint.The Nut Bolts Of Board With Angle Iron Post / Supporting Structure After Fixing At Site Has To Be Electrically Welded. Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Sheeting Shall Have 7 Yearswritten Warrantyfrom The Manufacturer And Authorised Distributor / Convertor Issued For Field Performance Including The Screen Printed Areas And Cut-Out Sheeting And Cut-Out Durable Transparent Overlay Film And This Warranty Certificatein Original Should Be Submitted To The Engineer In Charge By The Contractor / Supplier.This Item Does Not Include The Cost Of Structural Steel Work Required For Support System. [ B. 4Mm Aluminum Composite Materialof Class B ] 12 Providing And Fixing Of Retro-Reflectorised Informatory Sign Board Rectangular / Square In Shape Having Area Less Than 0.9 One Square Meterr Made Out Of 4 Mm Aluminum Composite Panel With 0.5 Mm Skin Thickness On Either Side Bonded With White Retro Reflective Sheeting Ofclass B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Having Pressure Sensitive Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3, Supportedwith Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Two Coats Of Grey Stove Enamel Paint And Supported On One No. Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm, 3.5 Mt ~ 3.9 Mtlong Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M25 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm, 60 Cm Below Ground Level As Per Approved Drawing The Angle Iron Postshall Be Duly Painted With One Coat Of Epoxy Primer And Two Coats Of Epoxy Finish Paints Having Alternate Black And White Bands Of 25 Cm Width Including Fixures And Transportation Etc.Complete.The Nut Bolts Of Board With Angle Iron Post / Supporting Structure After Fixing At Site Has To Be Electrically Welded. Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Sheeting Shall Have 7 Yearswritten Warrantyfrom The Manufacturer Including The Digitally Printed Areas With Latex Printing Technology With Sheeting Manufacturer Approved Inks And Laminated With Uv Overlay Film And This Warranty Certificate Along With Sheeting Manufacturer Attested 3 Years Outdoor Weathering Test Report From Indian Govt Lab Must Be Submitted To The Engineer In Charge By The Contractor / Supplier. 13 Providing And Fixing Of Retro- Reflectorisedinformatory Sign Board Rectangular / Square In Shape Having Area Greater Than 0.9 One Square Metre Made Out Of4 Mm Aluminum Composite Panelwith 0.5 Mm Skin Thickness On Either Side Bonded With White Retro Reflective Sheeting Ofclass B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Having Pressure Sensitive Adhesive Retoreflective Specified Back Ground, Border And Back Side Retoreflctive Symbols, Letters, Numerals, Arrow As Per Irc:67-2012 Table No 8.3, Supportedwith Back Support Frame 25Mm X 25Mm X 3Mm, Duly Painted On Back Side With Two Coats Of Grey Stove Enamel Paint And Supported On Two No. Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm, 3.5 Mt ~ 3.9 Mtlong Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M25 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm, 60 Cm Below Ground Level As Per Approved Drawing The Angle Iron Postshall Be Duly Painted With One Coat Of Epoxy Primer And Two Coats Of Epoxy Finish Paints Having Alternate Black And White Bands Of 25 Cm Width Including Fixures And Transportation Etc.Complete.The Nut Bolts Of Board With Angle Iron Post / Supporting Structure After Fixing At Site Has To Be Electrically Welded. Class B ( Type Iv High Intensity Micro-Prismatic Grade Sheeting-Hip ) Sheeting Shall Have 7 Yearswritten Warrantyfrom The Manufacturerincluding The Digitally Printed Areas With Latex Printing Technology With Sheeting Manufacturer Approved Inks And Laminated With Uv Overlay Film And This Warranty Certificate Along With Sheeting Manufacturer Attested 3 Years Outdoor Weathering Test Report From Indian Govt Lab Must Be Submitted To The Engineer In Charge By The Contractor / Supplier. 14 Painting Line, Dashes, Arrows Etc On Roads In Two Coats On New Work With Ready Mixed Road Marking Paint Confirming To I.S. 164 On Bituminous Surface Including Cleaning The Surface Of All Dirt, Dust And Other Foreign Matter, Demarcation At Site And Traffic Control ( Over / Upto __Cm Wide ) ( Morth-803 ) --______ Surface [ A. Over 10Cm Wide On New Surface ] 15 Painting Line, Dashes, Arrows Etc On Roads In Two Coats On New Work With Ready Mixed Road Marking Paint Confirming To I.S. 164 On Bituminous Surface Including Cleaning The Surface Of All Dirt, Dust And Other Foreign Matter, Demarcation At Site And Traffic Control ( Over / Upto Cm Wide ) ( Morth-803 ) Surface [ B. Upto 10 Cm Wide On Old Surface ] 16 Painting Line, Dashes, Arrows Etc On Roads In Two Coats On New Work With Ready Mixed Road Marking Paint Confirming To I.S. 164 On Bituminous Surface Including Cleaning The Surface Of All Dirt, Dust And Other Foreign Matter, Demarcation At Site And Traffic Control ( Over / Upto Cm Wide ) ( Morth-803 ) Surface [ C. Over 10Cm Wide On Old Surface ] 17 Painting Line, Dashes, Arrows Etc On Roads In Two Coats On New Work With Ready Mixed Road Marking Paint Confirming To I.S. 164 On Bituminous Surface Including Cleaning The Surface Of All Dirt, Dust And Other Foreign Matter, Demarcation At Site And Traffic Control ( Over / Upto Cm Wide ) ( Morth-803 ) Surface [ D. Upto 10 Cm Wide On Old Surface ] 18 Grade Of Approved Size And Shape For City Streets, Small / Medium Market Roads, Low
