Power Development Department has published Tender For Creation Of 63Kva Sub-Station At Bajwani. Submission Date for this Tender is 13-01-2024. Overhead Line Tenders in awantipora Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 10-Jan-2024 | CORRIGENDUM NOTICE | Technical Bid | 13-01-2024 |
Sl. No. | Item Description |
1 | Installation,testing,commissioningincluding Loading, Transportation, insurance, Unloading, Carriage and Delivery at Siteof 25KVA, 11/0.433 kV Distribution Transformer,(Transformer Deptt.Supply) |
2 | Errection,testing & commissioning including loading, transportation, insurance, unloading, carriage and delivery at siteof 9 Mtr long ST Poles SP-33 including excavation of pole pits, refilling the pit with soil, boulders.(Deptt. Supply) |
3 | Errection,testing & commissioning including loading, transportation, insurance, unloading, carriage and delivery at siteof 8 Mtr long ST Poles SP-15 including excavation of pole pits, refilling the pit with soil, boulders.(Deptt. Supply) |
4 | Supply, Laying,testing, stringing, tensioning and binding of conductor ACSR 0.05 (Rabibit) including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices and mechanical/manual carriage upto site. |
5 | Providing & fixing of Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm. as per REC Standards/drawings. |
6 | Supply and painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint) inscribed with permenent marking on each pole viz. name of scheme - 2021-22/xx - xxmeans pole numbers say 01,02..... |
7 | Providing, errection, testing & commissioning of G.Ichannel cross arms, G.I V-Cross arms, Sub-station channels (G.I) & Angle Iron Braces (G.I), transformer beltings, including back clamps for fixing cross arms etcfabricated of different sizes (REC Standard) & to be fixed with GI Nuts & Bolts and washers without drilling/punching holes in the poles. |
8 | Providing & and fixing of 11 kV Pin Insulators (polymer) with Pins ( 5 KN) |
9 | Providing & fixing of 11 kV,G.O AB Switch , 3-phase, 200A (09 insulator post type) with arragement for pad locks & operating rod . The operating rod shouldbe G.I Pipe (B-class) of 25 mm dia of requisite length. |
10 | Providing & fixing of 11 kV Horn,Gap Fuse 3-phase 100A |
11 | Providing & fixing Supply and installation of Gapless Surge Arrestor,9 kV,10 kA, LA with (polymer) housing, Station Type |
12 | providing and fixing of LT fuse set complete by using Angle iron of size 45x 40 x 3mm------ 6ft. Long ( cement grounting} - 2 numbers with insulators etc. |
13 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 185 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
14 | Providing, laying of Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole including muffing 20 cm above groundlevel, plaster and curing of concrete. |
15 | Providing, laying of Cement bottoming 1:2:4 mix as per REC standards 0.45cum/pole including muffing 20 cm above groundlevel, plaster and curing of concrete. |
16 | Providing & fixing of P.G. clamps for fixing of LT cable with distribution transformers having capacity upto 100 kVA |
17 | Providing & fixing of185 mm sq Aluminum Thimbles for cable terminations |
18 | Providing and and fixing of 3 No. sub station earthingby GI Pipe 40 mm or GI Rod 20mm, 2.5 mtr long through GI Strip of 50X6 for neutral earthing and 25X3 mm for 2 transformer body earth, two no. pole earth, 1 no. LA Earth and 1 no. GO handle earth as per REC approved construction standards with F5, F10 & J2 drawings issued by REC as reference. Each electrode to be connected through double GI strips to be fixed on baby insulators. The termination should be bolted and not welded. |
19 | Providing and fixing of shackle insulators(polymer) ( 16KN) with GI back clamps to be fixed without drilling/punching of poles on ST poles. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail