Tender For Renovation Of Simulation Lab Of Electrical Engineering Department, Mumbai-Maharashtra

Tender For Renovation Of Simulation Lab Of Electrical Engineering Department- 1 Removing The Existing Cement Plaster Of Any Thickness Without Causing Dust Nuisance And Stacking The Debris Upto A Distance Of 50 Metres Or Spreading In The Compound And Cleaning The Site Etc. Complete. 2 Treating Rising Dampness ( Capilariaction ) In Masonry Wall Using Low Pressure Pump And Injecting An Alkali , Silicon, Silicone Or Stearate Fluid Into Holes Of 16 Mm Dia With 200 Mm Length Drilled Into Walls At Spacing Ofevery 9 Inches .Fill The Holes With Polymer Modified Mortar .Finish The Mortar Joints Between The Bricks Masonry Etc Complete. 3 Providing Internal / External 20 Mm Thick Ready Mix Plaster Confirming To Is:4031 ( Part4 ) 1988 And Is 383-1970 In A Single Coat Using Cement Mortar Of Proportion 1:4 Containing Special Type Of Polymer Additives About 0.4%, To All Type Of Surfaces In All Positions Including Scaffolding And Curing Complete 4 Providing And Applying Water Proofing Treatment Using Acrylic Polymer Modified Cement Based Water Proofing Coating With Fibre Glass Mesh Mixing At The Rate Of Powder To Liquid ( 2:1 ) By Weight Covering 9 To 10 Square Metre / Kilogram With Two Coat Using Approved Chemicals For Masonry And Concrete Surface By Brush Covering 7 Years Guarantee On Stamp Papers Etc. Complete. 5 Providing & Applying Chemical For Cleaning The Exposed Steel Structure, Tmt Bars, Etc. Of Structure By Grinding The Surface By Grinder Machine, Wire Brush, Removing Existing Corrosion From The Metal Also Removing Loose Particles, Of The Area By Water Jet, ( Using Other Mechanical / Manual Means ) And Apply On Prepared Surface Of As Corrosion Preventive Coat On Prepared Tmt Bars, Steel Structure, Metal Surface Etc. To Protect It From Corrosion Etc. As Per ManufacturerS Specification ( Using Other Manual / Mechinical Means ) After That Providing And Applying High Abrasive Resistant, Self Curing, Uv Resistant, Impermeable , High Strength, Non Shrink, Poly Ironite Ceramic Cementatious ( Picc ) Repair Mortar Resurfacing On Concrete Surface Of Thickness Up To 10 Mm Including Breaking Honey Comb Area, ( Using Manual / Mechanical Means ) , Clean The Concrete Surface With Special Chemical Clonon With Pressure Water Jet For Removing Of Algae Fungi, Apply Bond Coat Kelox Water Misible Epoxy Before Picc Application With All Leads And Lifts, Material, Machinery, Labour, Scaffolding, Etc. Complete As Per Specification And As Directed By Engineer-In-Charge. 6 Dismantling And Disposal Of Existing Ceiling, Furniture, Partition And Other Unwanted Material 7 Scrapping The Old Plastered Internal Surface With Sand Paper And Coating The Entire Surface With Mixtureof Whiting Or Glue And Linseed Oil Including Scaffolding Etc. Complete As Directed 8 Removal Of Debris Including Loading And Unloading On Approved Dumping Ground By Truck For The Lead Of 50 Kilometers. 9 Providingandlayingvitrifiedmat Finish Havingdecorativetypeofsize590 Millimeter To 605 Millimeter X 590 Millimeter To 605 Millimeter Of 8 To 10 Millimeter Thickness ( On A Existing Flooring ) With Bonding Chemical And Confirming To Is 15622-2006 ( Group Bla ) Of Approved Make Shade And Pattern For Flooring In Required Position Laid On A Bed Of Bonding Chemical Filling Joints Curing And Cleaning Etc . Complete. 10 Providing Andapplying Twocoats Ofwall Care Putty Onplastered Surface Andceiling And Walls To Prepare Surface Even And Smooth Of Approved Make, Etc Complete. 11 Providing And Applying Royale Luxury Emulsion Of Approved Make On Internal Wall Surface As Detailed Below Scrapping For Surface With Emery Paper And Wipe Clean For Area. Wall Primer With Brush By Adding Mineral Turpentine Oil By 8 To 10 % Or Water By 15 To 20% Allowing To Dry For 6 To 8 Hoursafter Applying Acrylic Wall Putty With Appropriate Prpportion Of Water Of Allow To Dry For Period Of 4 To 6 Hours Of Activity. Scrapping With Emery Paper And Wipe Clean Applying Paints Royale Luxury Emulsion 1St Coat With Brush Water Content Water 40 To 45% Or 65 To 70% By Role Applying Paints Royale Luxury Emulsion 2Nd Coat With Brush With Water Content 40 To 45% Or 65 To 70 % By Roller. ( With Prior Approval Of S.E. ) 12 Providngandfixinginpositionanodisedextrudedaluminumpartitions, Partlyglazedand Partly Laminated Having Frame Made Out Of Extruded Tubular Section Of Size 40 Mm X 60 Mm With 12 Mm Thick Three Layered Flat Pressed Teak Wood Particle Board Bonded With Bwp Type Exterior Grade Phenol Formaldehyde Synthetic Resin Conforming To Is 128231990, Laminated On Both Sides, Novateakor Equivalent And 5 Mm Thick Selected Quality Plain / Float Glass Panels Fixedwithaluminum Glassclips12mm X12mm Andrubbercushioningbeadingtoglass Partitions As Per Approved Drawing Etc. Compete 13 Providing And Fixing Modular False Ceiling Of 600 X 600 Mm Center To Center And 13 Mm Thick Square Mineral Fiber Board To Be Fixed On Frame Work Of Alluminium Sections For Suspended Falseceilingconsistingofalluminiumt2”X1½” ( 50Mmx40mm ) Weighing0.39 Kilogram / M At 60 Cms Center Center And Fixed With ½” X ½” ( 15 X 15 Mm ) Flanges Weighing 0.19 Kilogram / M Suspended On 6 Mm Dia Mild Steel Rod Weighing 0.22 Kilogram / M, Fixed On Wall And Beams Including Rounding Of The Edges With Alluinium T Of 2” X 1 ½” ( 50 Mm X 40 Mm ) Weighing 0.39 Kilogram / M Etc. ( All Alluminium Sections Shall Be Anodized ) Including All Labour, Material, Lifts Etc. Complete. 14 Providingandfixinginpositiongypsum Boardfalseceilingwith12.5Mm Thickgypsum Boards, Screwed / Fixedtotheunderstructureofsuspendedg.I.Gridconstructedand Suspended From The Main Ceiling Consisting Of Ceiling Sections Of Size 25 X 50 Mm Maximum Centertocenterdistanceof600milimetreperimeterchannelandintermediatechannelsat Maximumcentertocenterdistance1200milimetregalvanizedgridshouldbefixedto Reinforced Cement Concrete Slab. The Gypsum Board Should Be Fixed To Galvanized Iron Grid With Necessary Screws.The Boards Should Be Taped And Filled From Underside To Give Smooth, Seamless Ceiling. The Rate Should Include Necessary Additional Ceiling Sections And Intermediate Channels.Additional Intermediate Channels Should Be Fixed To Strap Hangers For Additional Support To Prevent Strapping At Every 1200 Milimetre Item To Be Completed Inall Respect Including Necessary Sleeves For Ducts Finishing Of Joints Cut Outs, Painting Including Labour, Material, Lifts Etc. All Complete. 15 Full Height Partitions In Glass Finish - Providing And Fixing 80Mm To 85Mm Thick Full Height Double Skin Partition Up To 3 Mtr Height With All Visible Sections In Anodized / Powdercoated Finish. Made Up Of Frames And Tiles. Frame Construction In Combinaton Of Aluminium Rails And Bottom , Center And Top Members, Connected With 2 Way Round Shape Post , 3Way Post , 4 Way Post Made Up Of Aluminium Extruded And Tiles In 5Mm Thk. Non Toughened Glass On Both Side. With All The Joints In The Partitions Covered With Pvc Extrusions To Provide Better Sound Proofing. Tiles To Be Separated 55Mm From Each Other To Provide Adequate Space For Drawing Cables For Electric, Data And Telephone With Proper Facility For Fixing Electrical And Data Switch Plates. As Per Design And Drawing. 16 Modification Of Existing Double Door By Applying 8Mm Thick Ply On Ether Side And Finished In Laminate, Cost To Be Inclusive Of All Required New Hardware 17 Providing & Fixing Meeting Tableof Size 3000 Mm X 900 Mm Finished In Approved Laminate 18 Providing & Fixing Hod Table Of Size 1800 Mm X 600 Mm With Rareside Storage Of Size 1800 Mm X 750 Mm Finished In Approved Laminate 19 Providing & Fixing Table Of Size 800 Mm X 550 Mm Finished In Approved Laminate, Provision Of Switch Socket Fixing To Be Made On Table 20 Providing & Fixing Soft Board Of Requierd Size 21 Providing & Fixing Glass Board With Plywoodbacking 22 Providing And Fixing 20 Mm Thick Laminated Sheet Board Pelmet Box 150 To 200Mm Wide To Doors Or Window Frames Including 20 Mm Dia. Aluminium Curtain Rod With Sockets And Finishing With French Polishing ( Without Top ) Etc.Complete 23 Providing & Fixing Roller Blackout Blinds For Windows 24 Repairing Existing Teak Wood Windows Including Ixing New Tower Bolt , Glass Panes, Handles Etc Complete. 25 Providing And Fixing 3.5 To 4 Mm Thick Veneer Finish Wall Panaling Made Out Of 50 X 25 Mm ( Finished Size ) C.C.T.W. Frame Work Or Size Of 600 X 600 Mm Center Or As Per Site Condition Covered By 6 Mm Thick Marine Plywood Of The Generally Confiriming To I:S 710-1980 Finished With 3.5 To 4 Mm Thick Matching Veneer Of Approved Color And In Satin Wallnut Groov Matched Veneer Pattern And Design Including Melamine Polishing & Design With Antitermite Treatment Etc. To Plywood And Woodwork With Ten Years Guarantee Bond Etc. Including All Lead And Lifts Complete As Per Architects Drawing And Instructions Of Engineer Incharge. 26 Providing And Fixing Distribution Boardfor All Ligting 1-8-31 Supplying And Erecting Pvc Surface Modular Switch Box Withdouble Mounting & Front Plate For 8 Modules Complete Dulyconnected. Each 230 26 256 27 Providing And Laying 4C X 16 Sqmm Aluminium Cable And Its Temination 28 Primery And Secondary Point For Lights With 2 Nos 1.5 Sqmm And 1 Nos 1 Sqmm ( New ) Point Wiring For Independent Plug In Isi Mark Hms Pvcconduit With 1.5 Sq.Mm ( 2+1E ) Fr Lsh Grade Copper Wire, Modular Type Switch, Earthing And Required Accessories As Per Specification No: Wg-Pw / Swpoint 6 29 1-6-6 Supplying & Erecting Mains With 2X4 Sq.Mm. And Earth Wire 2.5 Sq.Mm Frlsh Pvc Copper Wire In Hms Pvcconduit Min. 20Mm Dia, As Per Specification No: Wgma / Pc 30 Providing And Fixing 1 Switch And 2 Scoket On Each Table 1-7-13 Supplying And Erecting Flush Type Shockproof Plug Socket 6A & 16A ( 6 Pin ) With 16A Switch Combined With Indicator Lamp And Fuse With Gang Box On Wooden Board.Each 145 33 178 31 Providing And Fixingraw Power Point 1 Switch And 1 Socket 32 Providing And Laying Insulated Cable Of 2.5 Sqmm For Raw Power Connection 7-2-8 Supplying, Erecting & Terminating Xlpe Armoured Cable 2 Core 2.5 Sq. Mm. Copper Conductor Ontinuous 5.48 Sq. Mm. ( 12 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, On Wall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Cum 123 20 143 33 Providing And Fixing 36 Watt 2X2 Light Fitingsupplying And Erecting Square Shaped Crca / Die-Cast Aluminium Powder Coated Housing Led Panel Light ( Slim Edge-Lit ) 600X600mm Suitable For 36 W-40W With Provision For Plane Front Frame With Translucent Cover Fixed To The Housing Complete.Each 34 1-8-20 Supplying And Erecting Isi Mark Modular Type ( One Module ) Electronic Dimmer 400 / 450W, Duly Erected On Provided Plate And Box With Wiring Connections Complete.Each 35 2-12-3 Supplying And Erecting Regular / Standard Model Ceiling Fan Of 1400Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn / Cf Each 36 Providing Andfixing 1.5 Tr Split Ac Of Approved Make - 3 Starnon Invertor 37 Provising And Fixing Copper Piping With Insulation 38 Providing And Fixing Wire Cable 39 Providing And Fixing Drain Pipe 40 Installation Of Unit With Required Braket

INR 590 /-

INR 19000.0 /-

INR 18.99 Lakhs /-

Name of Work: Renovation of simulation lab of ElectricalEngineering Department .

Sl. No.	Item Description
1	Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.
2	Treating rising Dampness (Capilariaction) in masonry wall using low pressure pump and injecting an alkali ,silicon,silicone or stearate fluid into holes of 16 mm dia with 200 mm length drilled into walls at spacing ofevery 9 inches .Fill the holes with polymer modified mortar .Finish the mortar joints between the bricks masonry etc complete.
3	Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing complete
4	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.
5	Providing & Applying chemical for cleaning the exposed steel structure, TMT bars, etc. of structure by grinding the surface by grinder machine, wire brush, removing existing corrosion from the metal also removing loose particles, of the area by water jet, (using other mechanical / manual means) and apply on prepared surface of as corrosion preventive coat on prepared TMT bars, steel structure,metal surface etc. to protect it from corrosion etc. as per manufacturer"s specification ( using other manual / mechinical means) after that Providing and applying high abrasive resistant, self curing, UV resistant,impermeable ,high strength, non shrink, Poly Ironite Ceramic Cementatious (PICC) repair mortar resurfacing on concrete surface of thickness up to 10 mm including breaking honey comb area, (using manual/mechanical means) , clean the concrete surface with special chemical clonon with pressure water jet for removing of algae fungi, apply bond coat Kelox water misible epoxy before PICC application with all leads and lifts, Material, Machinery, labour, scaffolding, etc. complete as per specification and as directed by engineer-in-charge.
6	Dismantling and disposal of existing ceiling, furniture, partition and other unwanted material
7	Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed
8	Removal of debris including loading and unloading on approved dumping ground by truck for the lead of 50 kilometers.
9	ProvidingandlayingVitrifiedMAT finish havingdecorativetypeofsize590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc . complete.
10	Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete.
11	Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)
12	Providngandfixinginpositionanodisedextrudedaluminumpartitions,partlyglazedand partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixedwithaluminum glassclips12mm x12mm andrubbercushioningbeadingtoglass partitions as per approved drawing etc. compete
13	Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended falseceilingconsistingofalluminiumT2”x1½”(50mmx40mm)weighing0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.
14	ProvidingandfixinginpositionGypsum boardfalseceilingwith12.5mm thickGypsum boards, screwed/fixedtotheunderstructureofsuspendedG.I.Gridconstructedand suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centertocenterdistanceof600milimetreperimeterchannelandintermediatechannelsat maximumcentertocenterdistance1200milimetregalvanizedgridshouldbefixedto reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed inall respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
15	Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.
16	Modification of existing double door by applying 8mm thick ply on ether side and finished in laminate, cost to be inclusive of all required new hardware
17	Providing & fixing meeting tableof size 3000 mm x 900 mm finished in approved laminate
18	Providing & fixing HOD table of size 1800 mm x 600 mm with rareside storage of size 1800 mm x 750 mm finished in approved laminate
19	Providing & fixing table of size 800 mm x 550 mm finished in approved laminate, provision of switch socket fixing to be made on table
20	Providing & fixing soft board of requierd size
21	Providing & fixing glass board with plywoodbacking
22	Providing and fixing 20 mm thick Laminated sheet board pelmet box 150 to 200mm wide to doors or window frames including 20 mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top) etc.complete
23	Providing & fixing roller blackout blinds for windows
24	Repairing existing teak wood windows including ixing new tower bolt ,Glass panes,handles etc complete.
25	Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge.
26	Providing and fixing distribution boardfor all ligting 1-8-31 Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 modules complete duly connected. Each 230 26 256
27	Providing and laying 4C X 16 Sqmm Aluminium cable and its temination
28	Primery and secondary point for Lights with 2 Nos 1.5 Sqmm and 1 Nos 1 sqmm(New)Point wiring for independent plug in ISI mark HMS PVCconduit with 1.5 sq.mm (2+1E )FR LSH grade copper wire,modular type switch, earthing and required accessories as per specification No: WG-PW/SW Point 6
29	1-6-6 Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification No: WGMA/PC
30	Providing and fixing 1 Switch and 2 scoket on each table 1-7-13 Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. Each 145 33 178
31	Providing and fixingraw power point 1 switch and 1 socket
32	Providing and laying Insulated cable of 2.5 Sqmm for raw power connection 7-2-8 Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor ontinuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU m 123 20 143
33	Providing and fixing 36 watt 2"X2" light fitingSupplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.Each
34	1-8-20 Supplying and erecting ISI mark modular type (one module) electronic dimmer 400 / 450W, duly erected on provided plate and box with wiring connections complete. Each
35	2-12-3 Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF each
36	Providing andfixing 1.5 TR Split AC of approved make - 3 Starnon invertor
37	Provising and fixing Copper piping with Insulation
38	Providing and fixing Wire Cable
39	Providing and fixing Drain Pipe
40	Installation of Unit with required braket