|
| 1 | Demolishing brick work manually / by mechanical mean including stacking the servicea able material and disposal of unversice able materialin cement morter |
| 2 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :RCC 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position andbinding all Mild steel and Medium Tensile steel bars |
| 4 | Providing Centring and shuttering including strutting, propping etc. and removal of form work for.Foundation ,footings ,basesof columns,etc mass concrete |
| 5 | Brick work using common brunt clay F.P.S(non -modular) bricks of class desingnation 7.5 infoundation and plinth in c.m. 1:6 (1:cement 6:sand ) |
| 6 | Half Brick masonary using common brunt clay F.P.S(non -modular) bricks of class desingnation 7.5 in superstructure above plingth level up to floor V level |
| 7 | Providingwood work in frames of door windows,clerestory,window and other frames wrought framed and fixed in position with hold fast lungs or with dash fasteners of required dia & length;1st. class Sal wood |
| 8 | Providing and fixing of pannelledglazed or panelled glazedshutters for ,windows and clerestorey windowfixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge (Note:- Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treatedwood 40 mm thick shutters(Deodar Wood 1st class) |
| 9 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Kiln seasoned and chemically treated hollock wood |
| 10 | Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001(Part B), using 12 mm thick toughend glass panes for doors, windows and clerestory windows fixingwith butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick toughend glass pane |
| 11 | 15mm cement plaster on therough side ofsingle or half 13.8 15mm cement plaster on roughof single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) |
| 12 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes |
| 13 | Applying priming coat on new wood and wood based surfaces to give an even shade brushingetc.chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 14 | Painting wood work with Deluxe Multi more coat applied @ 0.90 ltr/10 sqm over an Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 15 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete . 300x16mm |
| 16 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10mm ( 10 No) ( 150x10mm =64 Nos) |
| 17 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm = 8 No or 100 mm = 32 Nos |
| 18 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 800x800 mm |
| 20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 500x500 mm |
| 21 | Providing and fixingplain multipurpose cement helix board ( High Pressure stems cured) with celling of approved quailty with butt jointing and nail 6mm tjick cement fiber board as per IS;14862 |
| 22 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc range of two squatting plates with 10litreP.V.C. automatic flusing cistern |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size630x450 mm with a pair of 15 mm C.P.brass pillar taps |
| 24 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 25 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.MS Hollow Tupe |
| 26 | Providing and fixing decorative3D wall paper complete in all respect on wall of required shade and to the best satisfaction of engineer in charge. |
| 27 | Providing and fixing3 D wood pannelling on wall complete in all respect of required shade and to the best satisfaction of engineer in charge. |
| 28 | Providing and fixing3 D wood pannelling on wall complete in all respect of required shade and to the best satisfaction of engineer in charge. |
| 29 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 30 | Providing and fixing double bedofreputed make godrej choclate groov brandwith matteress and of required design as per ISI standred and as per best satisfaction of Engineerin charge |
| 31 | Providing and fixing center table ofreputedArobor / Gracia godrejand of required design as per ISI standred and as per best satisfaction of Engineerin charge |
| 32 | Providing and fixing cornertable ofreputedgodrej choclate groov and of required design as per ISI standred and as per best satisfaction of Engineerin charge |
| 33 | Providing and fixing dressing table with mirror table of godrej choclate groovand of required design as per ISI standred and as per best satisfaction of Engineerin charge |
| 34 | Providing and fixingSofa6 seater ofreputed Zompy godrej ( 2+2+2+= 6 seater ) and of required design as per ISI standred and as per best satisfaction of Engineerin charge |
| 35 | Providing and fixingstainless steel curtain rodwith nacessary clemp etcas per ISI standred and as per best satisfaction of Engineerin charge |
| 36 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Group\"B\") |
| 37 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I.box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group\"A\". |
| 38 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 39 | Wiring for power plug with 2x4 Sq.mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 40 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 41 | Wiring for circuit/ sub-main with P.V.C. insulated heat resistant flame retardant (HRFR) and low smoke single core ( flexible) copper conducter cable in surface/recured PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required 2x6 sq.mm &2x16 sq.mm |
| 42 | Supplying & fixing of stepped typeModular fox regulator on the existing modular box including making connection etc.as required. |
| 43 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
| 44 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.(SIF G.I. Modular box for 3pins 5amps) |
| 45 | Supplying and fixing batten/Angle holder including connection etc. as required |
| 46 | Supplying and fixing folling rating,double pole 250 volts, isolator in the existing M.C.B. D.B. complete with connections,Testing and commissioning etc. as required (RRCB DP 63 amp.cat.\"A\") |
| 47 | Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc.required.(RRCB DP 63 amp.cat.\"A\") |
| 48 | Supplyinganderection of 6amps. to 32 amps. rating, 10 KA breaking capacity, 240volts, \"C\" curves, miniaturecircuit breaker of following poles in the existing MCB DB complete with connections etc. as required(MCB)5amp to 32amp single pole |
| 49 | Supplying and fixing following way,single pole & neutral sheet steel MCB distribution board, 240 volts, on surface /resess, complete with tinned copper bus bar, wire set netural link, earth wire,din bar , detached gland plate, cable identificationlabelsinterconnections , phosphatized and powder painted, including earthing ect. as required (MCB Enclosure 12way single door) |
| 50 | Earthing with G.I. Earth pipe 4.5 mtr. Long x 40 mm dia includibg accesirries and providing masonary enclosure with cover palte having locking arrangenment and watring pipe etc. (but without charcoal or coke and salt) complete as required.Earthing with G.I.Earth Pipe 4.5mtr long) |
| 51 | Extra for using salt and charcoal for pipe earthingelectrode as required.(Extra using and charcoal) |
| 52 | Supplying and laying 8 SWG copper G.I. wire at 0.50 mtr. Below ground level for earth electrode conductor including soldering etc as required.(S/L 6.SWG GI Wire) |
| 53 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.(Cealing fan 1200mm Sweep,cat \"A\") & Cealing fan 1400mm Sweep,cat \"A\" |
| 54 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.(Exhaust fan,Light Duty,(Domestic)300mm Sweep.Exhaust fan,Light Duty,(Domestic)300mm Sweep. |
| 55 | Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc.1 x28 watt-FTL(T5) (Category-A) 1 x28 watt-FTL(T5) (Category-A) |
| 56 | Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia,cat.\"A\" |
| 57 | Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 63 Amp. TPN Category A |
| 58 | Supplying and fixing copper strip bus-barssuitable for 63 Amp. 415 volts capacity4 No. each ofcross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:- |
| 59 | Supplying & fixing of Bell Indicetor pying-4way good quality as per approved by the engineer in charge. |
| 60 | Supplying & fixing of water geyser (ISI) branded Racold Omnis,Havellswater storage 25 ltr. good quality as per approved by the engineer in charge. |
| 61 | Supplying & fixing of LED Modular (ISI) branded lights 12 V& 15 V good quality as per approved by the engineer in charge. |
| 62 | Supplying of Heat Pillar (ISI) brandedgood quality as per approved by the engineer in charge. |
| 63 | Supplying ofLED Sony ,LG 32\" inches (ISI) brandedgood quality as per approved by the engineer in charge. |
