Bharat Sanchar Nigam Limited-BSNL has published Tender For Renovation Of Ladies Toilets In 2Nd & 4 Th Floor & Gents Toilets In 4Th Floor And Repairs Of Toilets In Chambers Of Special Director General Telecom & Ddg (Admin & Hr) In 4Th Floor And Also Providing Aluminium Partition In Front Of Kitchen Room. Submission Date for this Tender is 12-01-2024. Toilet Bathroom Tenders in secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1) Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge |
| 2 | 2) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | 3) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 5 | Of area 3 sq. metres and below |
| 6 | 4) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 7 | For thickness of tiles 10 mm to 25 mm |
| 8 | 5)Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 9 | a) 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | b) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 11 | 6) Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
| 12 | 7) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 13 | a) 100X58X1.90 mm |
| 14 | 8) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 15 | a) 250x16 mm |
| 16 | 9) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 17 | a) 250x10 mm |
| 18 | 10) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 19 | a) 100 mm |
| 20 | 11) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 21 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | 13) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: |
| 23 | (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. |
| 24 | (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. |
| 25 | (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. |
| 26 | (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 27 | 14) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. |
| 28 | a) Two or more coats on new work. |
| 29 | 15) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 30 | a) Water thinnable cement primer. |
| 31 | 16) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 32 | a) Two or more coats on new work. |
| 33 | 17) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 34 | 18) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 35 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 36 | 19) Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 37 | a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 38 | 20)Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 39 | a) W.C. pan with ISI marked white solid plastic seat and lid |
| 40 | 21) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 41 | a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 42 | 22) Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 43 | a)Kitchen sink without drain board |
| 44 | i)610x460 mm bowl depth 200 mm. |
| 45 | 23)Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 46 | a)Flexible pipe |
| 47 | i)32 mm dia |
| 48 | 24)Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 49 | a) 100 mm inlet and 75 mm outlet |
| 50 | i) Sand Cast Iron S&S as per IS- 1729. |
| 51 | 25) Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 52 | a)Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 53 | 26) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 54 | a)20 mm nominal outer dia. Pipes. |
| 55 | b) 25 mm nominal outer dia .Pipes. |
| 56 | c) 40 mm nominal outer dia. Pipes. |
| 57 | d) 50 mm nominal outer dia. Pipes. |
| 58 | 27) Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 59 | a) 45 cm length |
| 60 | i) 15 mm nominal bore |
| 61 | 28) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 62 | a) Cement mortar 1:4 (1 cement :4 coarse sand) |
| 63 | 29) |
| 64 | a) For fixed portion |
| 65 | i) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 66 | i) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 67 | i) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 68 | 30) Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 69 | a) Pre-laminated particle board with decorative lamination on both sides. |
| 70 | 31) Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge |
| 71 | a) Powder coated minimum thickness 50 micron aluminium |
| 72 | 32) Fixing aluminium partitions with available aluminium sections, prelaminated particle board or glass panes etc., including providing new necessary screws, rubber gasket, cleats and including carriage of materials from Staff Quarters at Dubba as per the directions of the Engineer-in-charge. |
| 73 | 33) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 74 | a) 40 mm thick with 20 mm nominal size stone aggregate |
| 75 | 34) 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 76 | a) 1:6 (1 cement: 6 fine sand) |
| 77 | 35) Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 78 | 36) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 79 | 37) Providing and fixing PVC health faucet with 1m long PVC hose of approved brand and manufacture and of approved shade - 15mm |
| 80 | 38) Providing and fixing CPVC gate valves of approved brand and manufacture for CPVC pipe lines. |
| 81 | a) 25mm size |
| 82 | 39) Providing and fixing CPVC unions for CPVC pipe line including cutting and fixing. |
| 83 | a) for 25mm dia pipe line |
| 84 | 40) Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 85 | a) 15 mm nominal bore. |
| 86 | 41) Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 87 | a) 15 mm nominal bore. |
| 88 | 42) Providing and fixning 15mm C.P. brass two way bibcock of approved and brand and manufacture. |
| 89 | 43) Providing and fixing Stainless Steel grating 0.60mm thick grating for floor traps complete as directed. |
| 90 | a) 100mm dia Circular |
| 91 | 44) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash |
| 92 | fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 93 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 94 | a) Frame size 50 x 100 mm |
| 95 | 45) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 96 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 97 | a) 30 mm thick |
| 98 | 46) Extra for powder coating the available stacked aluminium material used for refixing of partitions/doors etc. including transporation and lifting charges as directed by Engineer in charge. (Weight of aluminium members used in the finshed work will be measured for payment) |
| 99 | 47) Charges for arranging carpenter / plumber along with helper for attending Carpentry/ Plumbing and other petty repair works in the compound etc., complete as per directins of Engineer - in - charge. |
| 100 | 48) Cleaning, washing mopping of floors of including cleaning of Dado, washroom and flooring in Toilets by scrubbing with wire brush, cleaning with detergent, liquids and water etc., including its disposal of rubbish, garbage outside the compound complete etc as directed by the Engineer-in-charge. |
| 101 | 49) Providing uPVC SWR grade soil, waste and vent pipes including cutting, placing in position conforming to IS : 13592 Type B including jointing with "T" shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant (i)Single socketed pipe (couplings and other accesories will be paid seperately) |
| 102 | a) 110 mm |
| 103 | b) 75 mm dia. |
| 104 | 50) Providing and fixing on wall face unplasticised - PVC SWR grade moulded fittings/ accessories for unplasticised Rigid PVC soil, waste and vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 105 | a) Bend with door - 110mm |
| 106 | b) 75 mm dia bend with door |
| 107 | 51) Making connection of CPVC distribution branch with G.I. main of following sizes by providing and fixing, including cutting and threading the pipe etc. complete : |
| 108 | a) 20 to 40 mm nominal bore |
| 109 | 52) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR grade Soil, waste, vent conforming Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.to IS : 13592 |
| 110 | a) Bend 87.5° with door |
| 111 | i) 75 mm |
| 112 | ii) 110 mm |
| 113 | 53) Providing and aluminium grill "Dural" or equivalent of approved pattern and design to aluminium frame work complete as directed. (Frame work will be paid separately) |
| 114 | 54) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
