Tender For Procurement Of One No.Of Segment Assembly Complete (Segment.9) For Caster #3 Of Smsii In Rourkela Steel Plant, Rourkela-Odisha

Tender For Procurement Of One No.Of Segment Assembly Complete (Segment.9) For Caster #3 Of Smsii In Rourkela Steel Plant SLAB STRAIGHTENING SEGMENTHE ASSEMBLY COMPLETE WITH 01 NO SEGMENT FIXED-SIDE FRAME, 02 NOS SIDE FRAME ATTACHMENTS, OL NO LOOSE SIDE FRAME, 01 NO LIFTING BEAM AND ATTACHMENTS FOR CASTERAS AS PER FOLLOWING DETAILS: 1. SEGMENT SIZE: WIDTH-5025MM, LENGTH-2528MM, HEIGHT-4158MM AND WEIGHT-74891KG 2. SLAS SIZE TO CAST-220/250/300 MM THICK & 1200-2500MM WIDTH. 3. SEGMENT REMOVAL-RADIAL WITH SEGMENT REMOVAL CHAIN. 4. WITH GUIDE LEDGES FOR GUIDE OF LOOSE SIDE FRAME. 5. SEGMENT ADJUSTMENT-HYDRAULICALLY POSITION CONTROLLED 6. MAX/MIN. OPENING DIMENSION-135/445 MM 7. ROLLER BARREL LENGTH-2600 MM B. NO OF ROLLER PAIRS-07 9. NO OF DRIVE ROLLERS, LOOSE SIDE-01 NO (ON CENTRE OF SEGMENT) 10 NO OF DRIVE ROLLERS, FIXED SIDE-NIL 11. TORQUE TRANSMISSION BETWEEN THE ROLLER BODIES-CROWN TOOTH COUPLING- 9. ROLLER TYPE-CLADDED SOLID BOLLER WITH CORE HOLE 10. ROLLER BODIES PER ROLL-03 CLADDED ROLLS DETAILS: GUIDE ROLL: (320X750)-01 + (320×1040)-01 (320X388)-01 GUIDE ROLL:(320X1040)-01 + (320X750)-01-320×388)-01 GUIDE ROLL (320X895)-01(320X895)-01+ (320×388)-01 DRIVE ROLLER ASSLY-(320X877)-02+ (320X352)-01 11. ROTARY JOINTS- 1) MONO FLOW ROTARY UNIONS-QTY 24(MAKE: GEORG SPRINGMANN) 25 DUAL FLOW ROTARY UNION-QTY-02(MAKE: GEORG SPRINGMANN 12. DRIVE FLANGE-CROWNED TOOTH CPLG 13. INTERMEDIATE SHAFT BETWEEN DRIVE ROLL AND CARDAN SHAFT, 14. SECONDARY COOLING: AIR-MIST TYPEHEADER +NOZZLES (MAKE LECHLER FOR FIXED & LOOSE SIDE) 16. MACHINE COOLING PIPES, FITTINGS, FLANGES: MOC SS 316L 17. BEARING DETAILS: 1. THRUST BEARING-SELF-ALIGNING ROLLER BEARING-24032, QTV-42 NOS 2. FLOATING BEARING CARB-C4032, QTY-42 NOS. 3. GE 160/230X105-QTY-08-MAINTAINANCE FREE (MAKE SCHAEFFLER /SKF & MODEL NO-GE160-UK-2RS (CLAMPING CYLI 17. HYDRAULICS/GREASE GRC/ MODEL: FOR GREASE (MAKE STABULI) A) M 24X1, 5AG 1.4571/RBE 11.745 M24X1,5/IC/HPI/05/JVRBE 11.8(QTY-2) 8) M24K1, 5AG 1.4571/RBE 11.145/IC/PP/VD/OS/HPI/JVREE 11.850(QTY-2) QRC: MODEL: FOR PINCH (MAKE STALL) C) SPX08.7616/JV/BMR/SP-(OTV-2) D) SPX08.1616/BMR/SP (QTY-2) ORC MODEL FOR CLAMPING (MAKE STABULI) E) SFX16:1625/JV/BMR/SP (QTY-2) F) SPX16.7625/JV/BMR/SP (QTY-2) 18. GREASE DISTRIBUTOR DETAILS LOOSE SIDE: VMCG-2-120-1300, QTY-21 NOS. FIXED SIDE: VMCG-2-120-1265, QTV 21 NOS LUBRICATION TUBES: 55 316L (ALL LUBRICATION TO BE FASTENED BY PIPE CLAMPS, TO BE FIXED IN WORKSHOP BASED ON PIPEWORK & SPACE AVAILABILITY AS PER DRAWINGS) NOTE: ALL GREASE & HYDRAULIC PIPE LINES SHOULD BE EQUIPED WITH WELDABLE PIPE NIPPLES TO WITH STAND PERSSURE UPTO 400 BAR GREASE DISTRIBUTORS: LINCOLN (BODY SS WITHOUT INDICATOR PIN HOUSING) 19. HYDRAULIC CYLINDER (CLAMPING) 400X180/315 QTY-04 WITH 02 SETS OF SEAL KITS (MAKE HPT, GERMAN) HYDRAULIC CYLINDER (PINCH) 160X100X190-QTY-02 WITH 02 SETS OF SEAL KIT (MAKE HPT, GERMAN) HYDRAULIC VALVE BLOCKS AS PER DRAWING 20. ELECTRICAL TERMINAL/JUNCTIONBOX:- 02 NOS STAINLESS STEEL WITH TERMINAL BLOCK, PREWIRED & IN COMPLETE ASSEMBLED CONDITION WITH ALL ACESSORIES FOR LEFT HSA/RIGHT HSA, FOR HYDRAULIC SEGMENT ADJUSTER. DRAWING NO: RS-8.00.1293, SH-1, SH-2,SH-3 & SH-4 21. CABLE: 2 NOS CABLE, SET, MM: 1XH05VVS-F126075, WITH CONNECTOR FOR RIGHT & LEFT HSA, MALE CONNECTOR HOUSING AT BOTH END OF CONNECTOR TYPE OF HOUSING: 248/M40, MAKE: HEARTING, TYPE OF CABLE: 1XH05VVS-F12G075, 1 X LIYCY 4 X 1.5 SQ.MM, 2 X LIYCY-TP 6 X 2X0.25, LENGTH OF CABLE: 7 MTR., CABLE TO BE PROVIDED WITH PROTECTION HOSE HFX 1-1/4

Refer document

Refer document

INR 7.87 Crore /-