|
| 1 | SUPPLY AND INSTALLATION OF CUTTING TOOL FOR THE UPGRADATION OF PRIORITY GITIS ACROSS UTTARAKHAND |
| 2 | Adjustable pipe die set BSP cover pipe size 1\" or 3/4\" |
| 3 | Centre drills 3 mm (Consumable) |
| 4 | Centre drills 4 mm (Consumable) |
| 5 | Centre drills 5 mm (Consumable) |
| 6 | Centre drills A 1 to 5 |
| 7 | Centre drills No. 3, 4 & 5 |
| 8 | Collapsible Tap with attachment |
| 9 | Coventry Die head |
| 10 | Coventry Type Die Head (Self-opening) |
| 11 | Die and Wrench Ø6,Ø8,Ø10,Ø12 |
| 12 | Die for Threading Different sizes |
| 13 | Dies Set 3 mm to 10 mm |
| 14 | Drill H.S.S. taper shank (6 mm to 12 mm instep of 0.5 mm) |
| 15 | Drill S.S. Twist block 2 mm |
| 16 | Drill S.S. Twist block 5 mm |
| 17 | Drill S.S. Twist block 6 mm |
| 18 | Drill Twist (straight shank) 1.5 mm to 15 mm by 0.5mm |
| 19 | Drill Twist (straight shank) 1.5 mm to 8 mm by 0.5mm |
| 20 | Drill Twist (straight shank) 3 mm to 12 mm by 0.5 mm H.S.S. |
| 21 | Drill Twist (straight shank) 3 mm to 12 mm by 1 mm H.S.S. |
| 22 | Drill Twist (straight shank) 3 mm to 13 mm by 0.5 mm H.S.S. |
| 23 | Drill Twist (straight shank) 3mm |
| 24 | Drill Twist (straight shank) 3mm to 6mm |
| 25 | Drill Twist (straight shank) 4 mm to 12 mm in step of 0.5 mm H.S.S. |
| 26 | Drill Twist (straight shank) 4mm |
| 27 | Drill Twist (straight shank) 6mm |
| 28 | Drill Twist (Taper shank) 14 mm to 20mm by 1 mm |
| 29 | Drill Twist (Taper shank) 8 mm to 20 mm by 0.5 mm H.S.S. |
| 30 | Hand Chaser M-12 & M-16 (External) |
| 31 | Hand Chaser M-12 & M-16 (Internal) |
| 32 | Hand keyway breacher |
| 33 | Hand reamer 6 to 16mm in steps of 1 mm |
| 34 | Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm |
| 35 | Hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75mm, 12.75 to 14.25 mm and 14.25to 15.75 mm |
| 36 | Indexable boring bar with inserts |
| 37 | Involute Gear cutter Size 2,2.5,3 module 20° pressure angle |
| 38 | Lapping plate Dia 6\" |
| 39 | Machine Chaser M-12 to M-21 |
| 40 | Machine reamer 6 mm to 25 mm by 1 mm |
| 41 | Machine reamer 6 to 16mm in steps of 1 mm |
| 42 | Machine Reamer parallel (Helical flute) 12 - 16mm set of 5. |
| 43 | Milling Cutter -Concave Ø 63 x 6 radius x 27 mm Bore Diameter |
| 44 | Milling Cutter -Convex Ø 63 x 6 radius x 27 mm Bore Diameter |
| 45 | Milling Cutter -Cylindrical Cutter Ø 63 mm, 90 mm Length and 27 mm Bore Diameter |
| 46 | Milling Cutter -Cylindrical Cutter Ø 63 x 70 x Ø 27 mm |
| 47 | Milling Cutter -Cylindrical Cutter Ø 80 mm, 90 mm Length and 27 mm Bore Diameter |
| 48 | Milling Cutter -Double Angle Unequal Cutter 50 X 12 X 27mm bore dia 55° |
| 49 | Milling Cutter -Double Angle Unequal Cutter 50 X 12 X 27mm bore dia 60° |
| 50 | Milling Cutter -Double Angle Unequal Cutter 63 X 18 X 27mm bore dia 70° |
| 51 | Milling Cutter -Double AngleUnequal Cutter 63 X 18 X 27mm bore dia 75° |
| 52 | Milling Cutter -Equal Angle Cutter 45°/100 mm x 27mm bore dia |
| 53 | Milling Cutter -Equal Angle Cutter 60°/100 mm x 27mm bore dia |
| 54 | Milling Cutter -Equal Angle Cutter 90°/100 mm 27 mmbore dia |
| 55 | Milling Cutter -Parallel Shank endmills Ø 6, Ø 10 and Ø 16are (double fluted), Ø 20 mm & Ø 25mm(four fluted) |
| 56 | Milling Cutter -Shell End Mill Ø 50 x 36 x 27 mm, Preferably InsertedTip Type |
| 57 | Milling Cutter -Shell End Mill Ø 75 mm x 50 x 27 mm, PreferablyInserted Tip Type |
| 58 | Milling Cutter -Side and face cutter dia 100 X 10 X 27mm |
| 59 | Milling Cutter -Side and face cutter dia 160 X 16 X 27mm |
| 60 | Milling Cutter -Side and face cutter dia 200 X 20 X 27mm |
| 61 | Milling Cutter -Side and face cutter dia 80 X 8 X 27 mm |
| 62 | Milling Cutter -Side and face cutter Ø 80 x 10 X Ø 27 mm |
| 63 | Milling Cutter -Single Angle Cutter 63 x 18 x 45°RH 27 mm bore dia |
| 64 | Milling Cutter -Single Angle Cutter 63 x 18 x 60°LH 27 mm bore dia |
| 65 | Milling Cutter -Single Angle Cutter 63 x 18 x45°LH 27 mm bore dia |
| 66 | Milling Cutter -Single Angle Cutter 63 x 18 x60°RH 27 mm boredia |
| 67 | Milling Cutter -Slitting Saw Cutter Ø 100 x 6 X Ø 27mm |
| 68 | Milling Cutter -Slitting Saw Cutter Ø 75 x 3 X Ø 27 mm |
| 69 | Milling Cutter -T Slot Cutter with Parallel Shank Ø 17.5 x 8 mm Width x Diameter ofshank 8 mm |
| 70 | Milling Cutter-Side and face cutter dia 100 X 12 X 27mm |
| 71 | Milling Cutter-Side and face cutter dia Side and face cutter dia 160 X 10 X 27mm |
| 72 | Number drills H.S.S. (parallel shank) |
| 73 | Parallel shank end mills Ø10 mm |
| 74 | Parallel shank end mills Ø12 mm |
| 75 | Parallel shank end mills Ø5 mm |
| 76 | Parallel shank end mills Ø6 mm |
| 77 | Parallel shank end mills Ø8 mm |
| 78 | Parting Tool Holder with H.S.S. blade |
| 79 | Pipe stock and dies complete with stocks,bushing, bushing holders, Taps and wrenches sizes covered, to suit pipes bore dia 6, 8, 10, 20, 25, 32,40 & 50 mm |
| 80 | Pipe threading die with handle Ratchet type Die head of 1/2”, 3/4\" and 1\" |
| 81 | Rachet pipe die 15 mm to 32 mm |
| 82 | Reamer Adjustable 10 mm to 15 mm |
| 83 | Reamer Adjustable 10 mm to 20 mm |
| 84 | Set of stock and dies - Metric |
| 85 | Shaper indexing center |
| 86 | Shaper indexing centre |
| 87 | Shaper tool holder turret type |
| 88 | T slot cutter with parallel shank Ø 17.5 x 8 mm width x dia. of shank 8 mm |
| 89 | Tap set Different size |
| 90 | Tap set with matching drills 1/8” to 5/8” |
| 91 | Tap set with matching drills 3 mm to 16mm |
| 92 | Tap Wrench (adjustable) M6,M8,M10,M12 |
| 93 | Taps and dies B.A. No. 0 to 10 in a box |
| 94 | Taps and dies B.S.F. up to 1 inch |
| 95 | Taps and dies B.S.W. up to 1 inch |
| 96 | Taps and dies metric 3 mm to 24 mm complete set in a box |
| 97 | Taps and dies metric 5 mm to 12 mm complete set in a box |
| 98 | Taps and wrenches Metric 5 mm to 12 mm |
| 99 | Taps set 3mm to 10mm |
| 100 | Tool Bits 12 X 150 mm sq |
| 101 | Trepanning tool 70mm |
| 102 | Woodruff key seating cutters A 13.5x3 |
| 103 | Woodruff key seating cutters A 16x4 |
