Military Engineer Services-MES has published Tender For Additional/Alternator And Special Repairs To Selected Jcos / Or Md Accommodation At Area-I At Saugor Under Ge Saugor.. Submission Date for this Tender is 14-02-2024. Mobile Generator Tenders in saugor Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jan-2024 | Corrigendum 1 | Date | 07-02-2024 |
| 2 | 25-Jan-2024 | Corrigendum02 | BOQ | 07-02-2024 |
| 3 | 07-Feb-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-02-2024 |
| Sl. No. | Item Description |
| 1 | Note: (i) Please refer schedule "A" notesbefore quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department. |
| 2 | Taking down cement Lime plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 3 | M & L cement plaster in two layers on stone / brick masonry surfaces or surfaces other than fair face of brick work, first layer 15mm thick in cement mortar (1:6) and second layer 5mm thick in cement mortar (1:4) with WPC @ 3% by weight of cement, finished the surfaces even and smooth without using extra cement complete all as specified & directed. NOTE - WPC will measured and paid seperated as supply only. |
| 4 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed |
| 5 | M&L for rendering 15 mm thick onsurface other than fair face of brick work / stone or concrete surfaces in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed |
| 6 | M & L for applying two coat of interior oil emulsion over a coat of wall primer incl. preparation of newly plasteredwalls etc complete all as specified and directed. NOTE :- The VOC contents of the distemper shall be less than 50 gms per litre. The shade & colour shall be as approved by GE |
| 7 | M&L Rendering 5mm thick on fair faces ofconcrete surfaces in CM (1:3) in finished even and smooth without using extra cement in ceiling complete all as specified and directed. |
| 8 | M&L three coats of White wash on newly plaster surface of ceiling including preparation ofsurface complete all as specified and directed. |
| 9 | M & L for complete removal of existing treatment on walls and Preparation of old surfaces and M & L for applying necessary levelling course to the surfaces including properly making of V shape crakes and filling of all cracks with crack seal of walls and including applying two coat of interior oil emulsion over a coat of wall primer complete all as specified and directed. NOTE :- The VOC contents of the distemper shall be less than 50 gms per litre. The shade & colour shall be as approved by GE |
| 10 | M & L for complete removal of existing treatment on walls and Preparation of old surfaces smooth with sand paper and finishing walls with acrylic smooth exterior paint of required shade : New work (two or more coat applied @ 1.67Ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10sqm) including properly making of V shape crakes and filling of all cracks with crack seal of walls complete all as specified and directed. NOTE :- The VOC contents of the distemper shall be less than 50 gms per litre. The shade & colour shall be as approved by GE |
| 11 | M&L for complete removal of existing treatment and preparation of old ceiling surfaces and applying two coats ofWhite wash complete all as specified and directed. |
| 12 | Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding ,removal of servicable tiles to store and rubbish off the premises, all as specified and directed. |
| 13 | Demolition of cement concrete un reinforced in ground floors and paving n exc 15cm thickness below or above GL complete all as specified and directed. |
| 14 | Demolition of cement concrete un reinforced other than ground floorscomplete all as specified and directed. |
| 15 | Demolition of reinforced cement concrete any description and in any position (other than ground floor) for complete all as specified and directed. |
| 16 | Demolition of cement concrete any description and in any position complete all as specified and directed. |
| 17 | M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors complete all as specified and directed. |
| 18 | M&L 25mm thick PCC 1:2:4 type B-0using 12.5 mm graded stone aggregate as in floor complete all as specified and directed. |
| 19 | M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors, as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 20 | All as per Ser item No.19 above butin dado / skirting etc. over and including 10mm thick rendering inCM (1:4) complete all as specified and directed. |
| 21 | M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 22 | M&L, for glazed ceramic joint freecoloured tiles of size450x 300 x 7mm thick, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match overand including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 23 | M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring,laid over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 24 | All as per Item No. 23 but as in skirting, dado laid over & including cement screed 10mm thick in CM (1:4) plaster including rounding of edges such as in steps , cooking plateform etc. complete all as specified and directed. |
| 25 | Taking down chowkats or frames with shutters (without taking of shutters from the frame) n.exc 1.5Sqm each complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutters (without taking of shutters from the frame) exc 1.50 but n exc n.exc 4Sqm each complete all as specified and directed. |
| 27 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with wood grain sheet) reinforced with MS square tube, fixing in opening as per specification complete all as specified and directed. |
| 28 | S&F factory made solid PVC flush door shutter, 28 to 30mm thick,with wood free EPS with 2,4 or 6 raised panel design with 4 mm thick 3D wood grain moulded PVC sheet on the front face & 4 mm thick plain wood grain PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed. |
| 29 | S & F 125x60mm Pressed steel frames for doors with both side rebates including necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C-0, including cutting holes complete all as specified and directed. |
| 30 | S&F pressed steel frame 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6 type C-0, including cutting holes complete all as specified and directed. |
| 31 | S&F35mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 32 | S&F, second class hard wood, 35mm thick glazed and skeleton shutters factory made, open rebated and prepared to receive glass, gauge, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and directed. |
| 33 | S&F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mmand fixed with tinned tacks or galvanisedstaples complete all as specified and directed. |
| 34 | M&L Two coats of synthetic enamal paint over a coat of pink primer on newly wood/wood based surfaces over 10cm width or girth incl preparation of new surface complete all as specified and directed. |
| 35 | S&Fbutt hinges 100mm ISI Marked, long extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixedcomplete all as specified and directed. |
| 36 | S&Fbutt hinges 100mmISI Marked, long extruded with Stainless steel hinges pin anodised and fixed complete all as specified and directed. |
| 37 | S&F 300mm long aluminiumalloy anodised sliding door bolt with hasp and staple (bolt type)ISI Marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified |
| 38 | S&F 250mm long aluminiumalloy anodised sliding door bolt with hasp and staple (bolt type)ISI Marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified and directed. |
| 39 | S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 200 mm long complete all as specified and directed. |
| 40 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 41 | S & F in repair MS 150mm, single action spring hingeswith steel wire spring, stove enamelled, black complete all as specified and directed. |
| 42 | S&F door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring,150mm long, fixed in door complete all as specified and directed. |
| 43 | S&F aluminium windows with sutter sliding type three track powder coated consisting of frame bottomof sizemin 92 X 31.75 mm,side and top of size min 92 X31.75, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 4 mm thick plain sheetglass with rubber gasket,brush and aluminium beading , handle , aluminium grill with fixing arrangement (wt. of grill not less than 2.50 kg/sqm), aluminium wire mesh 0.45 mm diaetcincluding necessarycutting holes on wall and floor and confirming to IS, complete all as specified &directed. (Aluminium section of weight 0.55 Kg / RM ) |
| 44 | S&F fixed type ventilators powder coated of aluminium with frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixedwith 4mm thick Pin Headed glass and half portion will be fixed with louvers with 4mm thick pin headed glass with rubber gasket and aluminium beading, aluminium wire mess 0.45 mm dia to be fixed over louvers portion onlyincluding necessarycutting holes on wall and fixing arrangements complete all as specified & directed.(Aluminium section thickness should have min thickness 1.50 mm ) |
| 45 | S & F Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed. |
| 46 | S & F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 47 | S&F25 mm bore SS pipe curtain rod including fancy type SS bracket & SS decorative dome, suitable for door / window curtain with SS braket fitted to each end and fixed to wall with wooden batens including removal of existing rod and making good complete all as specified and directed. |
| 48 | M&L Granite slab18-20 mm thickpre-polished, bedded and joined withcementand pointed with white cement with admixture of pigment to match over and including 15 mm thick screed bedCM (1:4) .the shade of granite stone including cutting and polishing as incill and jamb/skirting, steps cooking platform complete all asspecified and directed. |
| 49 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 50 | M&L for second class hardwood plain, solid, straight chowkhat and frames, wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 51 | M&L for 18/19 mm thick Prelaminated particle board, as in cupboard, shelves, pelmets etc. exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work with all around 12 mm thick teak wooden lipping with polishing cut to required size & fixed to frame complete all as specified and directed. |
| 52 | S&F 100 mm Hasp and staple, safety type, aluminium anodised, with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed. |
| 53 | S&F continuous (piano hinges, mild steel, bright finish or electro galvanised width of flaps (when opened) 30mm complete all as specified and directed. |
| 54 | S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 55 | M&L RCC M-25 (20mm graded aggregate) as in chajjas, landing steps etc. complete all as specified and directed. |
| 56 | M&L Mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and directed. |
| 57 | M&L Mild steel TMT bars above but 6 to 8mm dia bar and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and directed. |
| 58 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 59 | M&L for rolled section/hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and runningrails and guides for sliding doors, fixed with angle cleats or other connecction plates, Fe 410-W, E 250 quality "B" complete all as specified and directed. |
| 60 | M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment gde Fe 410-O or Fe 310-O complete all as specified and directed. |
| 61 | M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 62 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 63 | S&F for Pre-painted galvalume aluminum precoated coloured sheet 0.50mm thick for ridge or fixing for closing gable truss suitable for pfofile pattern sheet with self driving screws complete all as specified and directed. |
| 64 | M&L Two coats of synthetic enamal paint over a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of new surfaces complete all as specified and directed. |
| 65 | M&L for preprations ofold Steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and directed. |
| 66 | M&Lcomplete treatement for sunken portion kitchen & Toilet as mentioned below (From Ser item No 66.01 to 66.06) :- |
| 67 | Demolition of lean concrete and any type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. |
| 68 | and takingdown existing treatment of sunken portion. |
| 69 | M&L for water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and smooth without using extra cement. |
| 70 | M&L for applying two coats of water proofing compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. |
| 71 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc. |
| 72 | M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- above includes (a) Testing for water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontalflat area to be measured complete all as specified and directed. |
| 73 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and waste pipeincluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 254mm, bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 74 | S&F Stainless steel kitchen plate rack made of 1 mm thick SS sheet, of size 900mm X 600mm X 250mm complete all as specified and directed. |
| 75 | Taking up or down steel tubing 15mm bore and connection & removal from site complete all as specified and directed. |
| 76 | S&F 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified. |
| 77 | Taking up or down steel tubing 20mm bore and connection & removal to store complete all as specified and directed. |
| 78 | S&F 20 mm bore of GI Tubing medium grade with all fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified. |
| 79 | Cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting n exc 10cm girth. pinning in, making good to facings where required and pointing in CM 1:3 on stone walls complete all as specified and directed. |
| 80 | Dismantling water tanks of capacity exc 250 but n.exc 500 ltr &S&F 500 ltr capacity of rotational moulded polyethyline water storage tank, ISI Marked, (Cylindrical vertical with screw lid) hoisted & fixed in position incl S&F20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified & as directed. |
| 81 | Disconnecting existing tanks, exc 250ltrs but n exc 500 ltrs settingaside, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. lowering and hoistingif required, reconnecting and re-fixingin position complete all as specified and directed. |
| 82 | S&F 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repairscomplete all as specified & as directed. |
| 83 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified & as directed. |
| 84 | S&F in repairvitreous china squatting pan "Orisa pattern" size 580x440mmwhitewith integral foot rests any pattern including provn of cement concrete bedding and making connection with & including "P" or "S" Trap, etccomplete all as specified and directed complete all as specified and directed. |
| 85 | S&F in repair PVC low level flushing cisternof 10 Ltr capacity, dual (5 Ltr / 10 Ltr) valve less including flushing pipe bend PVC bend, PVC connection etc. complete all as specified and directed. |
| 86 | S&F in repair vitreous china WHB white flat back size 550x400mm with & including MS bracket, CP pillar tap fancy type - 1No. Of 15mm bore, CP waste coupling 32mm dia., 32mm dia PVC Waste pipe fo suitable length and PVC connections 15mm size with PTMT nuts of length 450mm high pressure complete all as specified & directed. |
| 87 | S&F CP hot & cold waterwall mixure unit with arrangement for overhead shower andwith hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe complete all as specified and directed. |
| 88 | S&Fin repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handlescrewed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 89 | S&F in repairs chromium plated Angle valve 15 mm dia, fancy type screwed down light pressurescrewed both ends for iron pipe or for union complete all as specified & directed |
| 90 | S&F in repairs chromium plated concealed stop valve 15 mm dia, fancy type screwed down light pressurescrewed both ends for iron pipe or for union complete all as specified & directed |
| 91 | S&F in repair 125 mm size brass chormium plated shower rose fancy type with long body including fixing to steel pipe or union complete all as specified and directed. |
| 92 | S&FSoap dish (oval), mild steel, chromium platedapproximate size 100x 50x10mmfixed to wall with screw and wooden / plastic plug etc complete all as specified and directed. |
| 93 | S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed |
| 94 | S&F in repair 600x450mm beveled edge mirror of selected quality of glass mounted on 5 to 6 mm thick AC building board or commercial plywood with first class hard wood decorated beading all round including all necessary fixing arrangement, complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) Pipe single socketed in any length with rubber ringjointlaid intrenches or in floor for 110mm diacomplete all as specified & as directed. |
| 96 | S&F in repair PVC (SWR) Pipe single socketed in any length with rubber ringjoint&fixed to wallwith clamps for 110mm diacomplete all as specified & as directed. |
| 97 | S&F in repair PVC (SWR) Pipe single socketed in any length with rubber ringjointlaid intrenches or in floor for 75mm diacomplete all as specified & as directed. |
| 98 | S&F in repair PVC (SWR) Pipe single socketed in any length with rubber ringjoint&fixed to wallwith clamps for 75mm diacomplete all as specified & as directed. |
| 99 | S&F in repairfor75mm outlet dia PVC (SWR) Multi floor trap, with hinge type SSgrating including jointing with solvent cementcomplete all as specified and directed. |
| 100 | S&F in repair PVC Bends any radius 110mm bore complete all as specified & as directed. |
| 101 | S&F in repair PVC Bends any radius 75mm bore complete all as specified & as directed. |
| 102 | S&F in repair PVC Bends any radius 75mm boreWith accessble door complete all as specified & as directed. |
| 103 | S&F in repair PVC (SWR) Junction single T equal or unequal 110mm bore provided with access door complete all as specified and directed. |
| 104 | S&F in repair PVC (SWR) Junction single T equal or unequal 75mm bore provided with access door complete all as specified and directed. |
| 105 | S&F in repairPVC vent cowl 110mm borecomplete all as specified & as directed |
| 106 | M&L for 75mm thick PCC (1:2:4) Type B1using 20mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling constructionjoints 20 mm deep x 10 mm wide filled with bitumen & sand mortar 1:3 complete all as specified and as directed. |
| 107 | M&L Machine pressed precast concrete colouredinterlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness,M-35 Grade of approved quality,laid over and including 40 mm thick M- sand cushion vibtrated with mechanical vibrator complete all as specified and as directed. |
| 108 | M&L for PCC(1:2:4)type B0 using 12.5mm graded stone aggregates mixed with integral waterproofing chemical/compoundas in padding on roof surfaces for correcting /making proper slope on roof,surface finished fair and even without using extra cement complete all as specified and directed.(WPC will be measured and paid for separately) |
| 109 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 110 | M & L 10mm thick plaster in CM 1:4 with WPC will be applied over the roof slab when concrete is green after the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/Sqcm using cement based cement grout. After the surface is repaireds the slab will be tested for water tightness again before proceeding with further treatment , complete all as specified and directed. Note : WPC will be measured and paid separately as supply only |
| 111 | M&L for provn of water proffing roof treatmenttoRCC roof with APP modifed membrane, thickness of membrane not less than 3 mm and weighing not less than 3kg/sqmcomprising with following items complete all as specified and directed , comprising of following items from Ser item No 105.01 to 105.05 |
| 112 | The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimneystacks, etc. and other similar situation to ease up about corners. |
| 113 | Bituminious based Primer conforming to IS: 3384 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is propertyimpregnated. |
| 114 | After the application of approved bituminous primer the APPwater proofing membrane shall be laid on the primed surface by torch application method as per manufacturer’s instruction. The overlap while torching shall be 100mm in longitudinal direction and 100mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. NOTE :- (i) APP membrane shall be single, non woven, polyster reinforced (Central core) as specified. (ii) The APP membrane shall be laid through authorized applicator of the manufacture. |
| 115 | All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. |
| 116 | A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded complete all as specified and directed. |
| 117 | M&L for cool roof ceramic tiles9-10mm thick 600x600mm size , white confirming to sun reflective Index (SRI) value minimum of 90, laid with 3 mm thick spacers, & joints should be filled with epoxy joint filling compound on 15 mm thick over & including 1:3 CM screed bed complete all as specified and directed. |
| 118 | M & L Apply two coats of bituminous aluminium paint over APP membrane @ 0.30 Kg/Sqm complete all as per manufacturers instructions. |
| 119 | M&L for brick work with kiln burnt bricks (old size) built in CM (1:6) using sub class "B" bricks straight or curved on plan exceeding 6 meter mean radius complete all as specified and directed. |
| 120 | M&L RCC M-25 (20mm graded aggregate) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in landing, cooking platforms, shelves complete all as specified and directed. |
| 121 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stoneaggregate) as in benching,floors and the like including weathering, slightly rounded or chamfered angles and throating including form work complete all as specified and directed. |
| 122 | M&L for rendering 15mm thick in cement mortar 1:4on faces of brick work or concrete surfaces; finished even and smooth without using extra cement complete all as specified and directed. |
| 123 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. |
| 124 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channel and drain , etc complete all as specified and directed. |
| 125 | M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab of manhole set in cement mortar 1:4 including demolition of existing broken cover slabs complete all as specified and directed. |
| 126 | Supply onlywater proofing compound complete all as specified and directed. |
| 127 | M&L for Brickwork with old size subclass "B" bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 128 | M&L for preparation of newly plastered surfaces of wall and finishing walls with acrylic smooth exterior paint of required shade, applying two or more coat of paint @ 1.67 ltr / 10 sqm and priming coat of exterior primer @ 2.20kg / 10 sqm complete all as specified and directed. |
| 129 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch,sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor,complete all as specified & directed. etc. |
| 130 | Taking down main switch, DB/change over,main switch,cut out fuse box of any capacity complete all as specified & directed. |
| 131 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit of 20 mm dia,includingmodular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed for Ser Item No 120.01 to 120.05 below. “Note:- Cutting and chasing in stone/brick masonry and making good to disturbed surfaces complete included in quoted rate of the contractor.” |
| 132 | For one light, fanpoint controlled by one switch |
| 133 | For onecall bell point controlled by one push button switch. |
| 134 | For one5 Amp independent socket point controlled by one switch |
| 135 | For one 3 pin ,5 Amp socket point with other switch on the same board |
| 136 | For one light, point controlled by two wayswitch |
| 137 | Description all as per Ser item No121.00 here in before but for power point wiring usingwith 2.5sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. “Note:- Cutting and chasing in stone/brick masonry and making good to disturbed surfaces will be including in quoted rate of the contractor.” |
| 138 | S&F Modular switch, one way, 6 Amp 230, 1 module. |
| 139 | S&F Modular switch, two way, 6 Amp 230, 1 module. |
| 140 | S&F socket Modular 6 Amp-2/3 pin combined 2 module |
| 141 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt. |
| 142 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt. |
| 143 | S&F ceiling rose, surface backlit,three terminal. |
| 144 | S&Flamp holder insulated with back plate suitable for Angle/Batten fitting. |
| 145 | S&F modular fanregulator electronic 5 step 120W, 2 module. |
| 146 | S&F modular bell push 6A ,1 module. |
| 147 | S&F call bellding dong230 Volt , single phase. |
| 148 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type engineering plastic batten with white acrylic cover & driver, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 149 | Fixing Only LED lights fitting of any size and capacity including with suitable copper wire from ceiling rose, screw, wall plug etc complete all as specified and directed. |
| 150 | Supply and fixing LED light fitting mirror type withhigh out put diffuser approx 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 151 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 152 | Supply and fix exhaust fan, Steel body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers including making hole in stone /brick wall grouting &making good in all aspectsall as specified and directed. |
| 153 | Supply and fix exhaust fan, made of sturdy engineering plastic with louvers shutter, voltage 230V, 50Hz, 1200 RPM with copper winding, size of sweep 250mm completeall as specified and directed. |
| 154 | Supply and fix electric water heater,storage type ABS body with stainless steel tank with inner lining and heating element2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc , complete all as specified and as directed. |
| 155 | Taking down old serviceable ceiling fans, connecting cables, dismantling blades, & shifting the same to E/M store till B/R repairs are over & Hanging up same ceiling fans to its previous location including provn of 0.5 Sqmm multistranded copper conductor double core flat or twisted cable from ceiling rose to connector of fan including cleaning, replacement of rubber bushes, condenser, complete all as specified and as directed. |
| 156 | Supply and fix BEE 5 star ratedceiling fans230V, 1200mm sweep ,with brushless direct current motor (BLDC) and including down rod upto 1 meter and provisionsuitable hook and connecting up with three core twisted flexible copper conductor cable with suitable size from ceiling rose,including marking of MES number using black synthetic enamel paint. complete all as specified and asdirected. |
| 157 | Taking down and refixing connecting electric meter SPup to 60 amp incl S & F suitable board close recessed type of suitable size, complete all as specified and as directed. |
| 158 | Disconnecting and taking down exhaust fan from any location and refixing after cleaning complete greasing oiling etc. complete all as specified and as directed. |
| 159 | M&L concealed sub main wiring with two Nos, single core PVC FRLSH insulated unsheathed stranded copper conductor cable of size6 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green,complete all as directed. Note : Three runs of cable and one run of conduit shall be considered as one running metre for payment purpose & cutting and chasing in stone/brick masonry and making good to disturbed surfaces will be including in quoted rate. |
| 160 | S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs, complete all as specified and as directed. |
| 161 | S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs , complete all as specified and as directed. |
| 162 | S&F testing and commissioning of MCB SPN 40 Amp 240 Volt 10 KA capacity having B-curve characteristics connected with suitable lugs , complete all as specified and as directed. |
| 163 | S&F flush to wall (concealed) sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size ,complete all as specified and as directed. “Note:- Cutting and chasing in stone / brick masonry and making good to disturbed surfaces will be including in quoted rate” |
| 164 | S&F flush to wall (concealed) double door metallic sheet metal enclosure for DBdouble door(DPX-125 ) VTPN4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 09 ,complete all as specified and as directed. Note :- Cutting and chasing in stone / brick masonry and making good to disturbed surfaces will be including in quoted rate” |
| 165 | S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA having suitable frame size to fix in VTPN DB incl making incoming & outgoing connections by using lugs ,complete all as specified and directed. |
| 166 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant omplete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. NOTE : -Lamp bracket for light fitting shall be measured & paid separately. |
| 167 | M&L for GI pipe bracket of size 40 mm dia light grade, suitable housing light fitting of length not less than 1.5 Mtr long and bent to a shapeincl fixingwallwith 02 Nos MSflate clampof suitable size incl nut bolt and washers complete all as specified and as directed. |
| 168 | M&L for earthing complete with galvanised steel earth plate 60cmx60cmx3.15 mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to earth lead of 4.0mm dia. galvanished mild steel wireby means of bolts nuts check-nuts and washers of galvanized ironor steel as shown in electrical plate No 3 of MES schedule Part-I connecting to earthing test point and testing on completion with including 15mm bore lightgrade GI protection pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with life hook made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note:- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii)The unit rate includes the cost of GI pipe light grade for protection of earth strip and earh strip upto 7.5 M. (iii)PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself |
| 169 | M&L for theGI tubing of size 50 mm bore, Medium grade, ISI marked with all GI fittings (medium grade)incl laid in trenches ,floor etc complete all as specified and directed . |
| 170 | M&L for theGI tubing of size 25 mm bore, Medium grade, ISI marked with all GI fittings (medium grade)incl laid in trenches ,floor etc complete all as specified and directed . |
| 171 | M&L for theGI tubing of size 20 mm bore, Medium grade, ISI marked with all GI fittings (medium grade)incl laid in trenches ,floor etc complete all as specified and directed . |
| 172 | Excavation in in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in any type of soil & getting out complete all as specified and directed . |
| 173 | Removing excavatedmaterials (soil) not exceeding 50mtr & deposited where directed at a level not exceeding 1.5 mtr above the ground level. |
| 174 | Returning, filling in with excavated soil, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with soil complete all as specified and as directed. |
| 175 | S&Fin repairs gun metal gate valve,iron wheel head both ends screwed for iron pipe or for union 20 mm dia, ISI marked complete all as specified & directed. |
| 176 | M & L for screwing existing steel tubing for alteration or additions or lengthening screw on pipe to form connectors of any size GI tubingcomplete all as specified & directed. |
| 177 | Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm 3.5 core complete all as specified and directed. |
| 178 | M&L for sandcushioning in trenches for the cable etc complete all as specified in SSR Pt-I and as directed . NOTE :- Punned thickness shall be measured & paid. |
| 179 | Supply & Laying un-reinforced precast concrete cable cover, class LV, type 1 with flat size 250mmX 150mmX40mm for laying in trenches for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified and directed. |
| 180 | S&F in replacement of GI Pipe light grade 50 mm dia ISI marked , for cable protection, on pole or on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
