Tender For Procurement Of Interacting And Non Interacting System, Vocosity Measuring Apparatus

Sharing tender

Tender For Procurement Of Interacting And Non Interacting System, Vocosity Measuring Apparatus 1 INTERACTING AND NON INTERACTING SYSTEM, VOCOSITY MEASURING APPARATUS 1. Redwood I & II Viscometer :- These viscometers are used to determine the viscosity of petroleum products. Two adoption of Red Wood viscometer are available No. 1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No. 2 for liquids whose flow time exceeds 2000 seconds and No. 2 for liquids whose flow time exceeds 2000 seconds. Redwood Viscometer is used for the determination of redwood viscosity and which can be converted to Kinematic viscosity also. It is also used for observing the effect of temperature on viscosity by plotting graph. Standard : Red wood Viscometer NO-1 & 2 as per IP-70. • . Construction : A. Red wood no1 & 2 cup fitted in a single bath. Double Walled Construction, Bath made of S.S. & outer body made of M.S with powder coated External Surface For Aesthetic Appearance. One LED light fitted in back side of the 60ml receiving flask B. Cooling arrangement has been provided. • Control Panel / Display : A. Power Tripping Facility B. Precision type Digital Temp. Controller C. Heater Indication Switch. • Type Of Bath : Electrically Heated Immersion Heater. • Max Working Temperature : 99 Degree C • Continuous Working Temperature : 95 Degree C • Capacity : 1 Sample At A Time. • Heater : S. Steel Tubular Immersion Heater • Accuracy : +/- 0.1 Degree C • Readability : +/- 0.1 Degree C • Temperature Controller : By Energy Regulator Which Will Turn On & Off Heater As Time Switch. • Input Power Supply : 230 V Ac, 50 Hz, 1 Phase With 6 Amp Current Rating. • Heating Load : 1 Kw . • Motorized Stirrer : Bath liquid Stirrer Blade for Maintaining Uniformity through out the Chamber. • Top Lid Made Of Stainless Steel With Provision Of Mounting Of One Thermometer. 2. Engler Viscometer :- It is suitable to determine ratio between the time used by an asphalt sample or other petroleum products sample flowing out of Engler viscometer under a certain temperature and volume, and that of distilled water flowing out of Engler viscometer at 25 oC. The ratio is the Engler viscosity of asphalt or other petroleum products. The temperature of distilled water and the cubage of receiving flask may be different for other petroleum products measurement. Standard : as per IP-212. The instrument is composed of tester and Electrically heated with energy regulator control. Desktop structure. Both of inner and outer crucible adopt stainless materials. Inner crucible has been specially processed. The smooth finish corresponds with the test requirements. 1. Standard water value 51±1 s (Water temperature 20±0.1 oC; 200 ml; It can be converted into water value at 25±0.1 oC, 50 ml) 2. Temperature measurement range 0oC~100oC 3. Temperature controlling accuracy ±0.1oC 4. Thermometer In accordance with T0622 5. Measuring flask 100 ml 6. Inner container Made of stainless steel 7. Power of heater 550 W 8. Timer accuracy 1/100 s 3. Saybolt Viscometer :- Test Method : Determines the time required for 60mL of sample to flow through a calibrated orifice under precisely controlled conditions. Saybolt Universal Seconds (SUS) is the standard measurement for lubricants, insulating oils, and lighter fuel grades, and Saybolt Furl Seconds (SFS) is used for heavier oils and bitumen’s. Standard : Conforms to the specifications of ASTM D 88 • Construction : A. Double Walled Construction, Bath made of S.S. & outer body made of M.S with powder coated External Surface For Aesthetic Appearance. One LED light fitted in back side of the 60ml receiving flask B. Cooling arrangement has been provided. • Control Panel / Display : A. Power Tripping Facility B. Precision type Digital Temp. Controller C. Heater Indication Switch. • Type Of Bath : Electrically Heated Immersion Heater. • Max Working Temperature : 99 Degree C • Continuous Working Temperature : 95 Degree C • Capacity: 1 Sample at A Time. • Heater: S. Steel Tubular Immersion Heater • Accuracy: +/- 0.1 Degree C • Readability: +/- 0.5 Degree C • Temperature Controller : Bath Temp Control by Digital Temperature Controller • Input Power Supply: 230 V Ac, 50 Hz, 1 Phase with 6 Amp Current Rating. • Heating Load: 1 Kw. • Motorized Stirrer : Bath liquid Stirrer Blade for Maintaining Uniformity through out the Chamber. • Top Lid Made Of Stainless Steel With Provision Of Mounting Of One Thermometer. 4. Pensky Marten Close Cup Flash Point apparatus : - Test method : Semi-Automatic Penske Marten Flash Point Apparatus are designed & fabricated to suit various ASTM, IP & I.S. standards application in the growing field of petroleum, grease, Biodiesel ,Pharmaceutical Research Laboratories & Various Industries. It has a cutting edge technology to challenge & maintain Climatic conditions above freezing what so ever & where ever you need. Standard : as per Ip-34 , ASTM D-93 & Is-1448 (P-21) • Temperature : ambient to 370 0 C • Precision Digital Temperature Controller with an accuracy of +/-0.10 C • It determines the flash point by semi-automatic Pensky marten closed cup tester of fuel oils, lube oils, suspension of solids, liquids that tend to form a surface film under test conditions, and other liquids. • Semi automatic Pensky Marten flash point apparatus electrically heated with temperature control by voltage variac. • Bath temp control by digital temperature controller • Accuracy: +/- 0.1 Degree C • Readability: +/- 0.5 Degree C • Sample cup with cover & shutter Arrangement. Reducing socket with cock & “Y” for gas jet test flame. • It can be heated electrically or by gas also. • Dual speed – Deluxe model. • With oil cup, lid, gas ignition device. • Motorized stirrer Blade for Maintaining Uniformity through out the Chamber. • Gas ON/OFF valve. • Power supply: 230 V, 1 Phase, 50 Hz, 8 A total load. 5. Cleveland Open cup Flash Point apparatus :- Test method : Semi-Automatic Cleveland Open Cup Apparatus are designed & fabricated to suit various ASTM, IP & I.S. standards application in the growing field of petroleum, grease, Biodiesel,Pharmaceutical Research Laboratories & Various Industries. It has a cutting edge technology to challenge & maintain Climatic conditions above freezing what so ever & where ever you need. Standard : as per Ip-36, ASTM D-92 & IS-1448(P-69) • Temperature : Ambient to 370 0 C • Precision Digital Temperature Indicator with an accuracy of +/-0.10 C • It determines the flash point by semi-automatic Cleveland Open Cup tester of fuel oils, lube oils, suspension of solids, liquids that tend to form a surface film under test conditions, and other liquids. • Semi automatic Cleveland Open Cup apparatus electrically heated with temperature control by voltage variac. • Sample cup with insulated handle. • Thermometer holding clamp. Reducing socket with cock for gas jet test flame. • It can be heated electrically or by gas also. • With oil cup, lid, gas ignition device. • Motorized stirrer Blade for Maintaining Uniformity through out the Chamber. • Gas ON/OFF valve. • Power supply: 230 V, 1 Phase, 50 Hz, 8 A total load. 6. Abel Closed Cup apparatus Test method : Semi-Automatic Abel Closed Cup Apparatus are designed & fabricated to suit various ASTM, IP & I.S. standards application in the growing field of petroleum, grease, Biodiesel ,Pharmaceutical Research Laboratories & Various Industries. It has a cutting edge technology to challenge & maintain Climatic conditions above freezing what so ever & where ever you need. Standard : as Per IP-170 & IS-1448(P-20. Temperature : Ambient to 100 0 C • Precision Digital Temperature Indicator with an accuracy of +/-0.10 C • It determines the flash point by semi-automatic Abel Closed Cup tester of fuel oils, lube oils, suspension of solids, liquids that tend to form a surface film under test conditions, and other liquids. • Semi automatic Abel Closed Cup apparatus electrically heated with temperature control by voltage variac. • Sample cup with cover & shutter arrangement • Thermometer holding clamp. • Reducing socket with cock for gas jet test Flame. • It can be heated electrically or by gas also. • With oil cup, lid, gas ignition device. • Motorized stirrer Blade for Maintaining Uniformity through out the Chamber. • Air arrangement for cooling. • Gas ON/OFF valve. • Power supply: 230 V, 1 Phase, 50 Hz, 8 A total load..