Tender For Supply Of Tower Accessories Under Etd-I Kanpur, kanpur-Uttar Pradesh

Supply Of Tower Accessories Under Etd-I Kanpur - Important Note-Quantities Are Approximate And May Vary Upto Any Extent On Either Side As Per Requirment Of Site Condition Or May Not Be Excuted At All For Which No Extra Claim Shall Be Entertained Whithin The 10% ( ± ) Tender Value , Bird Guard Having Following Specification:- Bird Guardshall Beused On A-Typetowers Of The Transmissionline. Its Purpose Is To Prevent Birds From Perchingon Insulator String. The Birdguardshall Be Saw Tooth Type Madeof 18 Gaugesheet & As Per Dimensions Mentioned In Drawings Enclosed. Thisshould Be Galvanized After Manufactureas Per Iss-4759 With Latest Amendments. The Birdguardshould Be Suitable For Fitting On Cross Arm Of A – Typetowers Of Transmissionline. The Birdguard Shall Be Suppliedas Per Drawing Enclosed With The Tender Specificationalong Withrequired Quantity Of Bolts & Nuts And Washers. , Phase Plate Having Following Specification:-Circular Enamelleddisc Of Not Less Than100 Mm Dia Manufacturedout Of 16 Gaugem.S. Sheet Withprovision Of A 16 Mm Dia Bolt & Nutshall Be Suppliedfor Phase Indication In Set Of Enamelled Red, Yellow & Bluecolours. Both Sides Of The Plate Shall Be Enamelled With The Same Colour. Thesewould Be Fixedon Tension Towers Only As Per Drawing. One No.Hrh Boltand Nutof Size16mm X 40 Mm Along With 2 No. 2 Mm Thick Lead Washer For Each Plate Of The Set Shall Besuppliedwith Phase Platefor Fixingup With Tower. The Phase Plate Shall Be Supplied As Per Drawing Enclosed With The Tender Specification , Number Plate Having Following Specification:-To Number Serially The Tower Of The Transmission Line Commencing From Terminal Structure, Number Plates Indicating Name Of Transmission Line In Shortand Tower Number Arerequired. Number Plates Of Size Not Less Than 165 Mm X 150 Mm Manufactured Out Of 16 Gauge M.S. Sheet With Letters And Numerals Enamelled Red On White Back Ground. It Will Indicate The Section By Initial Letters Of About 35 Mm Height And Tower No. With Numerals Notless Than 65 Mm. 2 Nos. 16 X 40 Mm Hrh Bolt And Nut With 4 No. Leadwashers Of 2 Mm Thickness Shall Have To Besuppliedwith Eachplate. Matching Holes Of 17.5 Mm Shall Be Provided For Fixing Up The Plate With Tower.The Back Side Of The Plate Shall Beenamelled Black. The Number Of Plate Complete With Bolts, Nuts And Washers Shall Be Suppliedas For Thedrawing Enclosed Withthis Tender Specification. The Consignee Would Intimate The Name Of Transmission Line And Corresponding Numbers To Be Indicated On Number Plate Separately. Manufacture Of Numberplate May Be Takenup Onlyafter Receipt Of The Above Details. , Danger Board Having Following Specification:- Danger Plateof Sizenot Less Than380 Mm X 250 Mm Manufacturedout Of At Least16 Gauge M.S. Sheetshowing Sign Of Danger Shall Be Supplied.Dangersignshall Be Composed Of Word ‘Danger’ Writtenin Englishlettersof About 35 Mm Height, ‘Khatra’ In Hindi Letter Of About 45 Mm Height, 220, 000 Voltswritten In English Letters About 30 Mm Height And Twohuman Skulls Abovetwo Bones Shownin Crossof Size About 70 Mm X 80 Mm Shown Symmetrically Allenamelled Red On Whiteback Ground. 2Nos Hrh M.S. Boltsof Size16 Mm X 40Mm With Nut And 4 No. Lead Washers Of 2 Mm Thickness Will Haveto Be Suppliedwith Each Dangerplate. The Back Side Of The Plateshall Beenamelledblack. Matchingholes Of 17.5 Mm Shall Be Provided For Fixing Up The Plate Withtower. The Danger Plate Complete With Bolt, Nuts And Washer Shall Be Supplied As Per The Drawingenclosed With The Tester Specification.

INR 590 /-

INR 2000.0 /-

INR 1.30 Lakhs /-