Tender For Sg Eot Crane 10 Mt Pr 28034642, Hazira-Gujarat

Tender For Sg Eot Crane 10 Mt Pr 28034642 1 28034642 00010 00010 300884451 CRANE,EOT,SGL,10TON,16.5M,12M Technical Details Name : Nitin Tiwari Contact : Email : nitin.tiwari@amns.in 1 SET CRANE,EOT TYPE:SINGLE GIRDER , CAPACITY:10 TON , SPAN:16.5 M LIFT HEIGHT:12 M , DUTY CLASS:M5 RATED OPERATING VOLTAGE:415 VAC , CONTROL VOLTAGE:110 VAC ADDITIONAL INFORMATION:REQUIRED WITH ALL ACCESSORIES AS PER TS NO:- AMNS-CDE-TS-BF-0002 Item Details : ADDITIONAL INFORMATION - 1. NECESSARY INSPECTION REPORTS WITH RESPECT TO QAP NEED TO BE SUBMITTED TO M/S AMNS FOR ISSUE DCC FROM SITE BEFORE DISPATCH OF THE MATERIAL. 2. WARRANTY/ GUARANTY CERTIFICATE SOFT COPY NEED TO BE SUBMITTED FOR DCC <(>&<)> ORIGINAL MUST BE SUBMITTED AT THE TIME OF MATERIAL DISPATCH. 3. OFFER/QUOTATION MUST INCLUDE ALL TECHNICAL PARAMETERS OF OFFERED MATERIAL, DIMENSIONAL GA, CROSS SECTIONAL DRAWING WITH MATERIAL MANUFACTURING STANDARD <(>&<)> QAP THIS IS MANDATORY. 4. IN CASE OF ANY TECH QUERY, SUPPLIER MUST CLARIFY THE QUERY FROM SITE, BEFORE SUBMITTING THE OFFER/QUOTATION. THIS IS MANDATORY. 5. FOR ANY TECHNICAL CLARIFICATION REQUIRED AFTER PURCHASE ORDER RECEIPT, VENDOR NEED TO VISIT THE SITE ON FOC BASIS AND COLLECT NEC ESSARY DETAILS FROM SITE AT M/S AMNS HAZIRA – BLAST FURNACE PLANT. 6. WARRANTY/ GUARANTY INCLUDES BOTH MATERIAL LIFE AND INSTALLATION PERIOD, ANY DAMAGES OCCURRED / MIS FITMENT OBSERVED DURING WARRANTY/ GUARANTY PERIOD, VENDOR TO REPLACE THE MATERIAL ON FREE OF COST. TRANSPORTATION TO <(>&<)> FRO OF THE MATERIAL AND ANY TECHNICIAN / ENGINEER SITE VISIT REQUIRED THE SAME WILL BE ON FOC BASIS ONLY. 7. PROPER PACKING AND PACKING LIST SHOULD BE PROVIDED AND AMNS ITEM CODE TAG SHOULD BE PROVIDED ON THE PACKING BOX AND ITEM ALSO. 8. FINAL GENERAL ARRANGEMENT DRAWING, QAP, CROSS-SECTIONAL DRAWING WITH MTC, OPERATIONAL MAINTENANCE MANUAL NEEDS TO BE SUBMITTED BY VENDOR AFTER PO FOR M/S AMNS REVIEW / APPROVAL. NECESSARY PO DETAILS SHOULD BE MENTIONED ON ALL REF DOCUMENTS FOR IDENTIFICATION. 9. NECESSARY EPOXY PAINTING/ CORROSION/ EROSION PROTECTION COATING NEED TO BE PROVIDED. 10. ANY COMMISSIONING LUBRICANTS LIKE GREASE/ OIL REQUIRED, THE SAME NEEDS PROVIDED BY VENDOR. 11. VENDOR TO PROVIDE EXPECTED OPERATIONAL LIFE OF OFFERED MATERIAL. 12. OFFER REQUIRED FROM AUTHORISED DEALER / MANUFACTURAR, NEED TO PROVIDE ADEQUATE SUPPORTING DOCUMENTS. 13. MATERIAL REQUIRED BASED ON REQUIRED WITH ALL ACCESSORIES AS PER TS NO:- AMNS-CDE-TS-BF-0002 BASIS ONLY. Item Note :

Refer document

Refer document

Refer document