Tender For Re Etender Material Supply For Mgnregs Works, Palakkad-Kerala

Re Etender Material Supply For Mgnregs Works , Stone Aggregate ( Single Size ) 40 Mm Nominal Size , Stone Aggregate ( Single Size ) 10 Mm Nominal Size , Stone Aggregate ( Single Size ) 20 Mm Nominal Size , Coarse Sand ( Zone Iii ) , Portland Cement , Fine Sand ( Zone Iv ) , Quarry Waste , Royalty For Good Earth , Stone For Masonry Work , Solid Blocks Of Size 30X20x15cm , Solid Blocks Of Size 40X20x10cm , Solid Blocks Of Size 40X20x10cm , Hire Charge Of 5Hp Engine And Pump Set - Materials , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) :50 Mm Nominal Size , Interlocking C.C. Paver Block ( 80 Mm Thick, M-30 ) - Bedding Layer - 50Mm Thick , Vibrator ( Needle Type 40Mm ) , Hire Charges Of Concrete Mixer 0.25 To 0.40 Mm With Hopper , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel Corrugated Sheets , Galvanised Steel J Or L Hooks 8 Mm Dia , Mangalore Tiles 20 Mm Thcik , Mangalore Ridge Tiles 20 Mm Thick , Precoated Galvanised Steel Plain Ridges , Deharadun White Lime , Water Proofing Cement Paint , Mild Steel Round Bar Above 12 Mm Dia , Stone Aggregate ( Single Size ) :50 Mm Nominal Size , Interlocking C.C. Paver Block ( 80 Mm Thick, M-30 ) - Bedding Layer - 50Mm Thick , Black Plastic Seat ( Soild ) With Lid C.P.Brass Hinges And Rubber Buffers , Vitreous China Pedestal Type Wate Closet , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessories And Flush Pipe ) , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia - Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia - Add 75% For Fittings, Clamps And Wastage Etc. , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Brass Full Way Valve With C.I. Wheel ( Screwed End ) 25 Mm Dia , Pvc Pipe 63 Mm Outer Dia. 4 Kgf / Cm2 - ( 5% Added For Wastage Etc ) , Pvc Elbow 63 Mm Dia , Pvc Bend 63 Mm Dia , Pvc Tee 63X63x63 Mm Dia , Pvc End Cap 63 Mm Dia , Pvc Socket / Coupling 63 Mm Dia , Pvc Reducer 63X50 Mm Dia , Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia.Of Wire 0.63 Mm , Wire Nails , Pvc Pipe 50Mm Outer Dia 6Kgf / Cm2 , Bitumen Washer , Precoated Gi Traffored Sheet 0.350 Mm Thick , Precoated Aluminium Traffored Sheet 0.450 Mm Thick , Pincoda Wood Scantles 50X25mm , Anjali Wood Scantles 50X25mm , Twisted Steel Bar / Deformed Bar , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 25 Mm Dia , 450 Mm Dia R.C.C. Pipe , 500 Mm Dia R.C.C. Pipe , 600 Mm Dia R.C.C. Pipe , Pvc Plain Roofing Sheets , Mild Steel Sheets For Tanks , Mild Steel Plate , Structural Steel Such As Tees, Angles, Channels And Rs Joists , Pulley 25Mm Dia , G.I Pipe 40Mm , Brick Tiles , Mild Steel Tubes Hot Finished Welded Type , Mild Steel Round Bar Above 5 Mm Dia , Welding By Electric Plate , Red Oxide Zinc Chomate Primer , Gi Plain Washer , Solid Blocks Of Size 30X20x20cm , Adjustable Telescopic Prop 3 M ( 2.02-3.75M ) , Beam Clamp 300-380 Mm ( 450-1070 Mm ) , Adjustable Span Eso+Si ( 2.35-3.40 ) , Second Class Kail Wood In Planks , Second Class Kail Wood In Scantling , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Vitrified Floor Tile 60X60 Cm , Premium Acrylic Emulsion Of Interior Grade, Having Voc Content Less Than 50 Gm / Litre , Acrylic Exterior Paint , Exterior Primer , Epoxy Paint , 15 Mm C.P.Brass Tap , C.P. Brass Waste 32 Mm , C.I. Bracket For Wash Basin And Sinks , Pvc Pipe 20 Mm Outer Dia 10 Kfg / Cm2 , Pvc Pipe 32 Mm Outer Dia. 10Kgf / Cm2 , Pvc Pipe 40 Mm Outer Dia. 10Kgf / Cm2 , Pvc Pipe 110 Mm Outer Dia. 4Kgf / Cm2 , Iron Pintels Including Weldded Pin , Mild Steel Sheets With Bolts And Nuts To Rest On Pintels , Mild Steel Hooks , Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm , Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , Mild Steel Tubes Electric Resistant Or Induction Butt Welded , Mild Steel Round Bar 12 Mm Dia And Below , Flats Up To 10 Mm In Thickness , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , Float Glass Sheet Of Nominal Thickness 4 Mm ( Weight Not Less Than 10 Kg / Sqm )

INR 2760 /-

INR 50000.0 /-

INR 20 Lakhs /-

Name of Work: MATERIAL SUPPLY

Sl. No.	Item Description
1	Stone Aggregate(Single Size)40 mm nominal size
2	Stone Aggregate (single size) 10 mm nominal size
3	Stone Aggregate(Single Size)20 mm nominal size
4	Coarse sand (Zone III)
5	Portland Cement
6	Fine sand (Zone IV)
7	Quarry waste
8	Royalty for good earth
9	Stone for Masonry work
10	Solid blocks of size 30x20x15cm
11	Solid blocks of size 40x20x10cm
12	Solid blocks of size 40x20x10cm
13	Hire charge of 5HP engine and pump set - Materials
14	Stone Aggregate(single size): 06 mm nominal size
15	Stone Aggregate(single size): 12.5 mm nominal size
16	Stone Aggregate(single size):50 mm nominal size
17	Interlocking C.C. paver block (80 mm thick, M-30) - Bedding layer - 50mm thick
18	Vibrator (Needle type 40mm)
19	Hire charges of Concrete Mixer 0.25 to 0.40 mm with Hopper
20	Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots
21	Galvanised steel corrugated sheets
22	Galvanised steel J or L hooks 8 mm dia
23	Mangalore tiles 20 mm thcik
24	Mangalore ridge tiles 20 mm thick
25	Precoated galvanised steel plain ridges
26	Deharadun white lime
27	Water proofing cement paint
28	Mild Steel round bar above 12 mm dia
29	Stone Aggregate(single size):50 mm nominal size
30	Interlocking C.C. paver block (80 mm thick, M-30) - Bedding layer - 50mm thick
31	Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers
32	Vitreous china pedestal type wate closet
33	Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
34	Vitreous China flat back wash basin 630x450 mm
35	Vitreous china flat back wash basin 550x400 mm
36	Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
37	Vitreous China orrisa type w.c. pan size 580 mm
38	Coloured Orissa pattern W.C. pan 580x440 mm
39	Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia - Pipe 15 mm outer dia
40	Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia - Add 75% for fittings, clamps and wastage etc.
41	Polyethylene water storage tank with cover and suitable locking arrangemnet
42	Brass full way valve with C.I. wheel (screwed end) 25 mm dia
43	PVC pipe 63 mm outer dia. 4 kgf/cm2 - (5% added for wastage etc)
44	PVC Elbow 63 mm dia
45	PVC bend 63 mm dia
46	PVC Tee 63x63x63 mm dia
47	PVC end cap 63 mm dia
48	PVC Socket/coupling 63 mm dia
49	PVC Reducer 63x50 mm dia
50	Galvanised wire mesh of average width of aperture 1.4 and nominal dia.of wire 0.63 mm
51	Wire nails
52	PVC Pipe 50mm Outer Dia 6kgf/cm2
53	Bitumen washer
54	Precoated GI Traffored sheet 0.350 mm thick
55	Precoated Aluminium Traffored sheet 0.450 mm thick
56	Pincoda wood scantles 50x25mm
57	Anjali wood scantles 50x25mm
58	Twisted steel bar/deformed bar
59	G.I. pipes 40 mm dia
60	G.I pipes 50 mm dia
61	G.I. pipes 25 mm dia
62	450 mm dia R.C.C. pipe
63	500 mm dia R.C.C. pipe
64	600 mm dia R.C.C. pipe
65	PVC Plain roofing sheets
66	Mild steel sheets for tanks
67	Mild steel plate
68	Structural steel such as tees,angles,channels and RS Joists
69	Pulley 25mm dia
70	G.I pipe 40mm
71	Brick tiles
72	Mild steel tubes hot finished welded type
73	Mild Steel round bar above 5 mm dia
74	Welding by electric plate
75	Red oxide zinc chomate primer
76	GI plain washer
77	Solid blocks of size 30x20x20cm
78	Adjustable telescopic prop 3 m (2.02-3.75m)
79	Beam clamp 300-380 mm (450-1070 mm)
80	Adjustable span ESO+SI (2.35-3.40)
81	Second class kail wood in planks
82	Second class kail wood in scantling
83	Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
84	Vitrified floor tile 60x60 cm
85	Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre
86	Acrylic exterior paint
87	Exterior primer
88	Epoxy paint
89	15 mm C.P.brass tap
90	C.P. brass waste 32 mm
91	C.I. bracket for wash basin and sinks
92	PVC pipe 20 mm outer dia 10 kfg/cm2
93	PVC pipe 32 mm outer dia. 10Kgf/cm2
94	PVC pipe 40 mm outer dia. 10kgf/cm2
95	PVC pipe 110 mm outer dia. 4kgf/cm2
96	Iron pintels including weldded pin
97	Mild steel sheets with bolts and nuts to rest on pintels
98	Mild steel hooks
99	Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
100	35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
101	Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
102	Bright finished or black enameled mild steel screws 40 mm
103	Mild steel tubes electric resistant or induction butt welded
104	Mild steel round bar 12 mm dia and below
105	Flats up to 10 mm in thickness
106	Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
107	Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)