}

Tender For Construction Of Drought Pumping Station At Lis Kakapora By Way Of Providing Fitting Installation Testing And Commissioning Of Various Electro Mechanical Components, kakapora-Jammu And Kashmir

Irrigation And Flood Control Department-IFCD has published Tender For Construction Of Drought Pumping Station At Lis Kakapora By Way Of Providing Fitting Installation Testing And Commissioning Of Various Electro Mechanical Components. Submission Date for this Tender is 15-01-2024. Electromechanical Machinery Tenders in kakapora Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

41433024
Corrigendum : Tender For Construction Of Drought Pumping Station At Lis Kakapora By Way Of Providing Fitting Installation Testing And Commissioning Of Various Electro Mechanical Components
Open Tender
Indian
Jammu And Kashmir
kakapora
15-01-2024

Tender Details

Construction Of Drought Pumping Station At Lis Kakapora By Way Of Providing Fitting Installation Testing And Commissioning Of Various Electro Mechanical Components- 1 Design, Manufacture, Supply, Installation, Testing & Commissioning Of Horizontal Centrifugal Pumping Unit For Lis Kakapora. The Pumping Unit Shall Have The Following Specifications:-Pump:-Make= Wilo / Wpil / Kirloskar / Equivalentdischarge = 20.00 Cusecdynamic Head = 16 Mtr.Speed = 985 Rpmtype Of Pump =Horizontal Mixed Flow End Suction / Split Casingnpsh Available = 4.6 Mtrsmaterial Of Construction:Impeller = Cf8mimpeller Nut = Stainless Steel Astm 351 / Cf-8Mcasing Lines / Wearing Ring=Cf8mimpeller Shaft = Stainless Steel Aisi 410Stuffing Box = Cast Irongland=Bronze Grade V Of Is: 318Fasteners= High Tensile Steelshaft Sleeve = Stainless Steelpump Casing = Close Fine Grained Cast Iron Conforming To Is:210 Grade 20Motor:-Type= Three Phase, Squirrel Cage, Electric Inductionmotormake = Kbl / Bhel / Jyoti / Abb / Marathon. Rating =200 H.Pspeed=1000 ( Synchronized ) . Operating Voltage= 415 + 10 % Volt Frequency =50 + 3% Hz Class Of Insulation=F Type Of Duty = Continuous Type Of Enclosure = Tefc.The Motor Shall Confirm To Is: 325 With Latest Amendments. The Pumping Unit Shall Be Complete With Mild Steel Base Frame, Fabricated As Per Is 226 Or Is 2026, Requisite Number Of Foundation Bolts, And Pump - Motor Coupling.Third Party Inspection Certificate From Ceil / Rites Shall Be Enclosed With At The Time Of Delivery. 3Rd Party Inspection Charges Are Excluded From The Cost. 2 Fabrication, Providing, Installation And Testing Of 600 Mm Nominal Diameter 6.3 Mm Thick Efwmild Steel Pipes For Suction As Per The Following Technical Specifications:S.No Details Requirement1. Nominal Diameter = 600 Mm2. Thickness = 6.3 Mm3. Length Of The Pipe=08 Meters, 4. Type Of Welding= Efw5. Working Pressure =14.27 Kgf / Cm2job Includes Fabrication & Installation Of 600 Mm Dia. Mild Steel Long Radius Easy Bend Fabricated Out Of The Supplied Pipe. The Pipes Shall Be Fitted With M.S Plate Flanges 14 Mm Thick And Washers, Fasteners For End Connections And On The Foot Valve End, Totalling 06 Nos. The Pipes Shall Be Painted With Two Coats Of Anticorrosive Metal Primer And Two Coats Of Blue Paint. 3 Fabrication, Providing, Installation And Testing Of 500 Mm Nominal Diameter 6.3 Mm Thick Efw Mild Steel Delivery Pipe 05 Mtr As Per The Following Technical Specifications:S.No Details Requirement1. Nominal Diameter = 500 Mm2. Thickness = 6.3 Mm3. Length Of The Pipe= 05 Meter, 4. Type Of Welding= Efw5. Working Pressure = 14.27 Kgf / Cm2job Includes Fabrication & Installation Of 500 Mm Dia. Mild Steel 90 Degree Easy Bend Fabricated Out Of The Supplied Pipe. The Pipes Shall Be Fitted With M.S Plate Flanges 14 Mm Thick 02 No. And Washers, Fasteners For End Connections.The Pipes Shall Be Painted With Two Coats Of Anticorrosive Metal Primer And Two Coats Of Blue Paint. 4 Providing & Installation Of Swing Type Flanged Ms Foot Valve 600Mm Dia.Thickness Of Swing Plate 20Mmthickness Of Body 8Mmno Of Flanges 2 No Having Dia 600Mm And 20Mm Thick.The Foot Valve Should Be Provided With Ms Strainer Made Out Of 10Mm Square Bars Having Distance Of 25Mm Vertical Positions 5 Fabrication, Providing, Installation And Testing Of 900 Mm Nominal Diameter 8Mm Thick Efw Mild Steel Pipes For Rising Main Of 01 No. Pump. As Per The Following Technical Specifications:S. No Details Requirement1. Nominal Diameter= 900 Mm2. Thickness= 8 Mm3. Length Of The Pipe = 80 Meters4. Type Of Welding = Efw5. Working Pressure= 14.27 Kgf / Cm26. Tolerances = As Per Clause 12.3 Of Is:3589The Delivery Pipes Shall Be Fitted With M.S Flanges 14 Mm Thick Totalling 05 Nos. With Washers, Fasteners For Pipe Fittings And End Connections.The Job Also Includes Fabrication Of Bends, Offsets As Per Site Requirement. The Delivery End Of Pipe Should Be Welded With Suitable 12Mm Square Bars At An Equal Distance Of 150Mm From Each Other.The Pipes Shall Be Painted With Two Coats Of Anticorrosive Metal Primer And Blue Paint. 6 Manufacturing, Providing And Installation Of 600Mm Dia. X ( Pi ) Mm Dia. And 400Mm Long Eccentric Reducer Fabricated Out Of 6.3 Mm Thick Mild Steel Plate Duly Flanged On Both Sides. The Reducer Is To Be Fitted On The Suction Side Of Pumping Equipment. The Specifications Of M.S Flange On Reduced And Enlarged Side Of Increaser Shall Be As Under: -A ) . Reduced Side Flange: - ( 02 No, One Number Spare Matching Flange. ) I. Material = Mild Steelii. Nominal Dia. = ( Pi ) Mm As Per Pump Inletiv. Thickness = 14 Mmb ) . Enlarged Side Flange: - ( 02 No, One Number Spare Matching Flange. ) I. Material = Mild Steel Ii. Nominal Dia. = 600Mmiv, Thickness = 14 Mmthe Job Includes Providing And Fitting Of Nuts-And-Bolts Washers Etc. And Painting In One Coat Of Steel Primer Followed By 02 Coats Of Paint.Note: Pi = Pump Suction Dia. 7 Manufacturing, Providing And Installation Of 900 Mm Dia. X ( Po ) Mm Dia. And 400 Mm Long Concentric Increaser Fabricated Out Of 8 Mm Thick Mild Steel Plate Duly Flanged On Both Sides. The Increaser Is To Be Fitted On The Delivery Side Of Pumping Equipment. The Specifications Of M.S Flange On Reduced And Enlarged Side Of Increaser Shall Be As Under: -A ) . Reduced Side Flange: -- ( 02 No, One Number Spare Matching Flange. ) I. Material = Mild Steelii. Nominal Dia. = ( Po ) Mm As Per Pump Outletiii. Thickness = 14 Mmb ) . Enlarged Side Flange: -- ( 02 No, One Number Spare Matching Flange. ) I. Material = Mild Steel Ii. Nominal Dia. = 900 Mmiii Thickness = 14 Mmthe Job Includes Providing And Fitting Of Nuts-And-Bolts Washers Etc. And Painting In One Coat Of Steel Primerfollowed By 02 Coats Of Bituminous Paint.Note: Po = Pump Delivery Dia. 8 Supply Installation Testing And Commissioning Of Di Reflux Valve 500Mm Dia. Pn 1.6 Having Following Specifications.Body: Ductile Ironbonnet: Ductile Irondisc: Ductile Ironplug: Brass Surface Protection: Electro Static Epoxy Powder Coating.The Job Includes Fabrication Of By-Pass Arrangement For 500 Mm Dia. Nrv As Under: -I ) Creating Holes Of 25 Mm Using Gas Cutter.Ii ) Providing And Fitting Of 25 Mm Dia. Steel Pipe Heavy Class Of Required Length Along With 02 Nos. Of Elbowsiii ) Providing And Fitting Of 01 No. Ss Ball Valve 25 Mm Of Reputed Make Make Of Reflux Valve: Vag / Ivc / Kirloskar / Talis / Avk / Equivalent As Approved By The Department. The Reflux Valve Shall Be Provided With 02 No. Matching Flanges To Be Welded To In And Out Of Rising Main. The Refluxvalve Shall Be Provided With Manufactures Test Certificate . 9 Providing, Fitting, Installing And Testing Of Priming Pump Set Of Size 80Mmx65mm To Be Connected To 01 Number Horizontal Type Pumping Equipments At Site. The Priming Pump Set Shall Be Of Reputed Make. The Priming Pump Shall Be Mono Block Self Priming Type Mounted On Common Base Frame. The Prime Mover Rating Should Be 3 Phase Of 5 Hp Capacity. The Speed Of The Pumping Equipment Is 2880 Rpm ( Max. ) The Job Includes Providing / Fitting Of All Accessories As Per Requirement At Site As Mentioned Below: -A ) . M.S Suction Pipe Of 80Mm Dia. = 20’.0 ( Approximate ) B ) . G.I Delivery Pipe Of 65Mm Dia. = 40’.0C ) . Ball Valve Of 65Mm Dia. / 25Mm Dia =02 Nos. Each.D ) . C.I Foot Valve Of 80Mm Dia. = 1 No.E ) . G.I Bends, Elbows, Sockets, Flanges, Nipples= As Per Site Requirement.F ) . 6 Sq.Mm Sq Pvc Copper Conductor With Conduit= 180 Meter Each.G ) 05 Hp Star Delta Starter. 10 Fabrication, Providing, Fitting And Installation Of 5-Ton Capacity Sump Gantry. The Job Comprises Of The Following Specifications Process Of Fabrication And Involvement Of Material: -A ) . Vertical Supports: -Fabrication, Providing And Installation Of Gantry Vertical Supports ( 6 Nos. ) To Be Fabricated Out Of Mild Steel Pipe Of 150Mm Dia. Of Height 09 Mtrs. ( 06 No ) Shall Have To Be Fabricated As Per Drawing. At The Top. The Posts Shall Be Provided And Welded With Mild Steel Plate Having 10 Mm Thickness Welded At The Bottom And Top Duly Drilled With Suitable Diameter Holes. The Bottom Portion Of The Vertical Support Shall Be Embedded Into The Cement Concrete Block Gantry Beam: -Providing And Fitting Of Main I Beam ( Horizontal ) Of Size Ismb-250 Having Total Length Of 30 Mtrs Shall Also Be Fitted With Mild Steel Plate Of The Same Size I.E., 12”X12”, 10Mm Thick, With Nuts And Bolts. The Job Also Includes Providing And Fitting Of Nuts And Bolts For Fixing Of Plates Of The Horizontal Beam And Vertical Posts Plates. The Comprises Of Providing And Fitting Of Travelling Wheels At The Ends Of The Longitudinal Beam With 50Mm Square Bars.Providing And Fitting Of 5-Ton Capacity Chain Pulley Block And Monorail Having 6Mtrs Lift. The Chain Pulley Block Shall Be Of Reputed Makes Preferably Indef / Pull Lift / Globe / And Providing And Fitting Of 12 Mm Thick Steel Rope 20 Mtr. Long With D-Clamps. The Job Includes Providing Of 3 Ton Capacity Chain Pulley Block. 11 Providing, Supply, Laying And Fitting Of Xlpe Insulated 1.1Kv 1-Core 240 Sq. Mm Un-Armoured Aluminium Cable ( 330 Meters ) Covered With Suitable Pvc / Rubber Sleeves For Cabling Of Electrical Equipment. The Job Includes Crimping Of The Terminal Ends Of The Conductor With Hydraulic Tool And Providing And Fitting Of Corresponding Copper Lugs. The Conductor Shall Be Of Reputed Make Preferably Grand Lays / Havells / Polycab / Equivalent And Shall Be As Per Relevant Is Specifications. Providing And Fitting Of 630 Amp, 4-Pole 415V Mccb With Adjustable Thermal And Fixed Magnetic Setting Having 50 Ka Breaking Capacity Ics = 100% Icu ( Make: L&T D-Sine Or Equivalent ) .The Job Comprises Of Providing Of Hydraulic Crimpling Tool With 30 To 450 Ampere Dies.All The Electrical Items And Cable Installed In Station Shall Be Provided With Manufactures Test Certificate. 12 Fabrication, Providing And Fitting Of Canopy Of Size ( 1200X1500x1350mm ) For Protection Of Motors Lift Irrigation Station Kakapora. The Canopy Shall Be Fabricated Out Of Isa 40X40x5 Mm ( 77 Kg ) . After Fabrication Of Complete Angle Structure ( As Per Drawing ) , The Structure Shall Be Painted Twice By Anti-Corrosive Metal Primer And Two Coats Of Blue Paint. The Job Also Includes Providing And Fixing Of Cgi Sheets, High Rib, ( 28 Gauge ) 900X1800 Mm Of Blue / Green Shade To Be Fixed On The Roof Top Of The Angle Iron Structure. The Job Includes Providing And Fitting Of J Hooks, Washers, Nuts Etc. Required For Providing Of Cgi Sheets. ( 3.5 Sqm ) 13 Electrification :Providing, Fitting And Installation Of 30-Watt Led Flood Lights Where Ever Necessary As Per Requirement, Comprising Of Brackets And Necessary Fixtures Reqd. For Fitting The Flood Lights Etc. Make: Bajaj / Havells / Philips. The Job Includes Wiring Of Required Size & S / W Of Required Amperage. 14 Providing And Fitting Of Service Line For Electrificationand Station Premises. The Service Line Shall Be 2 Core-16 Mm Sq. Armoured Aluminium Xlpe Cable Including Suitable Size & Rating Of Thimbles To Be Drawn From Electric Transformer Sub-Station / Main Panel Board To Sub-Main Panel Board Or As Per Requirement. The Cable Shall Be Provided With Manufactures Test Certificate. 15 Providing And Fitting Of Mcbs For Electrical Circuit With 63A As Incomer, 10A Mcbs For Lighting Circuits, Floodlighting, Etc, 20A Mcb For Heating Circuits. The Mcbs Shall Be Mounted On A Mcb Distribution Box 10-Way Fitted On Panel Board For Central Control Of Electrification Of Pump House And Station Premises. ( Mcb Makes: Havells / Legrand / L&T / Schneider. 16 Supply Of Fire Extinguisher Abc Powder Type ( Stored Pressure ) Of 4 Kg Capacity With Following Feature1 ) Is Certified As Per Is 15683, 2 ) Operating Temperature 0 To 55 Degrees With Map Powder Complete In All Respects Suitable For All Types Of Fires Particularly Electrical Fires.Wall Hook And Discharge Pipe Shall Be Supplied Along With Cylinder 17 Providing And Fitting Of 2 Kwavr / Servo Voltage Stablizer Of Reputed Make. 18 Tool Kit: -The Tool Kit For Maintenance Shall Comprise Of The Following And All The Items As Mentioned Below Shall Be Of Taparia Make:Double Ended Spanner Of Size ( 6 / 7 To 30 / 32 ) ( 01 Complete Set ) Ring Spanner Set Of Size ( 12 / 13 To 30 / 32 ) ( 01 Complete Set ) Cutting Pliers, 8 Inch: ( 03 No`S ) Nose Pliers 8 Inch: ( 03 No`S ) Screw Driver 12 Inch / 8 Inch / 6 Inch / 4 Inch : ( 02 No`S Each Size ) Hammer, I Kg And ½ Kg: ( 01 No Each ) Heavy Duty Pipe Wrench 12 Inch&8 Inch: ( 02 No’S Each ) Bearing Puller ( Sizes 6 & 8 ) : ( 01 No. Each ) 1. Spirit Level ( 600Mm ) : 01 No.2. Digital Clamp Meter ( 400A Ac Range ) : 01 No. ( Meco / Rishabh / Fluke Make ) Make: Barigo / Htc Aluminium Ladder Telescopic Type 20Ft

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 10-Jan-2024 Corrigendum Technical Bid 15-01-2024
2 10-Jan-2024 Extension Date 15-01-2024

Key Value

Document Fees
INR 5000 /-
EMD
INR 95000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Construction of Drought pumping station LIS Kakapora by way of Providing, Fitting, Testing, installation and Commissioning of various Electro mechanical components
Sl. No. Item Description
1Design, Manufacture, Supply, Installation, Testing & Commissioning of horizontal centrifugal Pumping unit for LIS kakapora. The pumping unit shall have the following specifications:- PUMP:- Make= Wilo/WPIL/Kirloskar/equivalent Discharge = 20.00 Cusec Dynamic Head = 16 Mtr. Speed = 985 rpm Type of pump =Horizontal Mixed Flow End Suction/Split Casing NPSH Available = 4.6 Mtrs MATERIAL OF CONSTRUCTION: Impeller = CF8M Impeller Nut = Stainless Steel ASTM 351/CF-8M Casing lines/Wearing Ring=CF8M Impeller Shaft = Stainless Steel AISI 410 Stuffing Box = Cast Iron Gland=Bronze grade V of IS: 318 Fasteners= High tensile Steel Shaft Sleeve = stainless steel Pump Casing = Close fine grained Cast Iron conforming to IS:210 grade 20 MOTOR:- Type= Three phase, squirrel Cage, Electric InductionMotor Make = Kbl/Bhel/Jyoti/ABB/Marathon. Rating =200 H.PSpeed=1000 (Synchronized). Operating Voltage= 415 + 10 % Volt Frequency =50 + 3% Hz Class of insulation=F Type of Duty = Continuous Type of enclosure = TEFC. The motor shall confirm to IS: 325 with latest amendments. The pumping unit shall be complete with Mild Steel Base Frame, fabricated as per IS 226 or IS 2026, requisite number of Foundation Bolts, and Pump - Motor coupling. Third party inspection certificate from CEIL/RITES shall be enclosed with at the time of delivery. 3rd party inspection charges are excluded from the cost.
2Fabrication, providing, installation and testing of 600 mm Nominal Diameter 6.3 mm thick EFWmild steel pipes for suction as per the following technical specifications: S.No Details Requirement 1. Nominal Diameter = 600 mm 2. Thickness = 6.3 mm 3. Length of the pipe=08 meters, 4. Type of welding= EFW 5. Working pressure =14.27 kgf/cm2 Job includes fabrication & installation of 600 mm dia. Mild steel long radius easy bend fabricated out of the supplied pipe. The pipes shall be fitted with M.S plate flanges 14 mm thick and washers, fasteners for end connections and on the foot valve end, totalling 06 nos. The pipes shall be painted with two coats of anticorrosive metal primer and two coats of blue paint.
3Fabrication, providing, installation and testing of 500 mm Nominal Diameter 6.3 mm thick EFW mild steel delivery pipe 05 mtr as per the following technical specifications: S.No Details Requirement 1. Nominal Diameter = 500 mm 2. Thickness = 6.3 mm 3. Length of the pipe= 05 meter, 4. Type of welding= EFW 5. Working pressure = 14.27 kgf/cm2 Job includes fabrication & installation of 500 mm dia. Mild steel 90 degree easy bend fabricated out of the supplied pipe. The pipes shall be fitted with M.S plate flanges 14 mm thick 02 No. and washers, fasteners for end connections.The pipes shall be painted with two coats of anticorrosive metal primer and two coats of blue paint.
4Providing & installation of swing type flanged MS foot valve 600mm dia. Thickness of swing plate 20mm Thickness of body 8mm No of Flanges 2 No having dia 600mm and 20mm thick. The foot valve should be provided with MS strainer made out of 10mm square bars having distance of 25mm vertical positions
5Fabrication, providing, installation and testing of 900 mm Nominal Diameter 8mm thick EFW mild steel pipes for Rising Main of 01 no. Pump. as per the following technical specifications: S. No Details Requirement 1. Nominal Diameter= 900 mm 2. Thickness= 8 mm 3. Length of the pipe = 80 meters 4. Type of welding = EFW 5. Working pressure= 14.27 kgf/cm2 6. Tolerances = As per clause 12.3 of IS:3589 The delivery pipes shall be fitted with M.S flanges 14 mm thick totalling 05 nos. with washers, fasteners for pipe fittings and end connections.The job also includes fabrication of bends, offsets as per site requirement. The delivery end of pipe should be welded with suitable 12mm square bars at an equal distance of 150mm from each other.The pipes shall be painted with two coats of anticorrosive metal primer and blue paint.
6Manufacturing, providing and installation of 600mm dia. x (PI) mm dia. and 400mm long eccentric reducer fabricated out of 6.3 mm thick Mild steel plate duly flanged on both sides. The reducer is to be fitted on the suction side of pumping equipment. The specifications of M.S flange on Reduced and enlarged side of increaser shall be as under: - a). Reduced side flange: -(02 No, one number spare matching flange.) i. Material = Mild steel ii. Nominal dia. = (PI) mm as per pump inlet iv. Thickness = 14 mm b). Enlarged side flange: -(02 No, one number spare matching flange.) i. Material = Mild steel ii. Nominal dia. = 600mm iv, Thickness = 14 mm The job includes providing and fitting of nuts-and-bolts washers etc. and painting in one coat of steel primer followed by 02 coats of paint. Note: PI = Pump Suction dia.
7Manufacturing, providing and installation of 900 mm dia. X (PO) mm dia. and 400 mm long concentric increaser fabricated out of 8 mm thick Mild steel plate duly flanged on both sides. The increaser is to be fitted on the delivery side of pumping equipment. The specifications of M.S flange on Reduced and enlarged side of increaser shall be as under: - a). Reduced side flange: --(02 No, one number spare matching flange.) i. Material = Mild steel ii. Nominal dia. = (PO) mm as per pump outlet iii. Thickness = 14 mm b). Enlarged side flange: --(02 No, one number spare matching flange.) i. Material = Mild steel ii. Nominal dia. = 900 mm iii Thickness = 14 mm The job includes providing and fitting of nuts-and-bolts washers etc. and painting in one coat of steel primerfollowed by 02 coats of bituminous paint. Note: PO = Pump Delivery dia.
8Supply installation testing and commissioning of DI Reflux valve 500mm dia. PN 1.6 having following specifications. Body: Ductile Iron Bonnet: Ductile Iron Disc: Ductile Iron Plug: Brass Surface Protection: Electro static epoxy powder coating. The job includes fabrication of By-pass arrangement for 500 mm dia. NRV as under: - i) Creating holes of 25 mm using gas cutter. ii) Providing and fitting of 25 mm dia. steel pipe heavy class of required length along with 02 nos. of elbows iii) Providing and fitting of 01 no. SS ball valve 25 mm of reputed make Make of Reflux Valve: VAG/IVC/KIRLOSKAR/ Talis / AVK/ equivalent as approved by the Department. The reflux valve shall be provided with 02 No. matching flanges to be welded to in and out of Rising main. The refluxvalve shall be provided with manufactures test certificate .
9Providing, fitting, installing and testing of priming pump set of size 80mmx65mm to be connected to 01 Number horizontal type pumping equipments at site. The priming pump set shall be of reputed make. The priming pump shall be Mono block self priming type mounted on common base frame. The prime mover rating should be 3 phase of 5 HP capacity. The speed of the pumping equipment is 2880 RPM (Max.)The job includes providing/fitting of all accessories as per requirement at site as mentioned below: - a). M.S suction pipe of 80mm dia. = 20’.0 (approximate) b). G.I delivery pipe of 65mm dia. = 40’.0 c). ball valve of 65mm dia./25mm dia =02 Nos. each. d). C.I foot valve of 80mm dia. = 1 No. e). G.I bends, elbows, sockets, flanges, nipples= as per site requirement. f). 6 sq.mm sq PVC copper conductor with conduit= 180 meter each. g)05 HP Star delta starter.
10Fabrication, providing, fitting and installation of 5-ton capacity sump gantry. The job comprises of the following specifications process of fabrication and involvement of material: - a). Vertical supports: - Fabrication, providing and installation of gantry vertical supports (6 Nos.) to be fabricated out of Mild Steel Pipe of 150mm dia. Of height 09 mtrs. (06 No) shall have to be fabricated as per drawing. at the top. The posts shall be provided and welded with Mild steel plate having 10 mm thickness welded at the bottom and top duly drilled with suitable diameter holes. The Bottom portion of the vertical support shall be embedded into the cement concrete block Gantry Beam: - Providing and fitting of main I beam (Horizontal) of size ISMB-250 having total length of 30 Mtrs shall also be fitted with Mild steel plate of the same size i.e., 12”x12”,10mm thick, with nuts and bolts. The job also includes providing and fitting of nuts and bolts for fixing of plates of the horizontal beam and vertical posts plates. The comprises of providing and fitting of travelling wheels at the ends of the longitudinal beam with 50mm square bars. Providing and fitting of 5-ton capacity chain pulley block and monorail having 6mtrs lift. The chain pulley block shall be of reputed makes preferably INDEF /PULL LIFT/ GLOBE/ and providing and fitting of 12 mm thick Steel rope 20 mtr. Long with D-clamps. The job includes Providing of 3 ton capacity Chain pulley block.
11Providing, Supply, Laying and Fitting of XLPE insulated 1.1KV 1-core 240 sq. mm un-armoured Aluminium cable (330 meters) covered with suitable PVC/ rubber sleeves for cabling of electrical equipment. The job includes crimping of the terminal ends of the conductor with hydraulic tool and providing and fitting of corresponding copper lugs. The conductor shall be of reputed make preferably Grand lays/ Havells/ Polycab/ equivalent and shall be as per relevant IS specifications. Providing and fitting of 630 AMP, 4-pole 415V MCCB with adjustable thermal and fixed magnetic setting having 50 KA breaking capacity Ics = 100% Icu (Make: L&T d-sine or equivalent).The job comprises of providing of Hydraulic Crimpling tool with 30 to 450 Ampere dies. All the electrical items and cable installed in station shall be provided with manufactures test certificate.
12Fabrication, providing and fitting of Canopy of size (1200x1500x1350mm) for protection of motors lift irrigation station Kakapora. The canopy shall be fabricated out of ISA 40x40x5 mm (77 kg). After fabrication of complete angle structure (as per drawing), the structure shall be painted twice by anti-corrosive metal primer and two coats of blue paint. The job also includes Providing and Fixing of CGI sheets, high rib, (28 gauge) 900x1800 mm of blue/green shade to be fixed on the roof top of the angle iron structure. The job includes providing and fitting of J Hooks, washers, nuts etc. required for providing of CGI Sheets.(3.5 Sqm)
13Electrification : Providing, fitting and installation of 30-watt LED flood lights where ever necessary as per requirement, comprising of brackets and necessary fixtures reqd. for fitting the flood lights etc. Make: BAJAJ/Havells /Philips. The job includes wiring of required size & S/W of required amperage.
14Providing and fitting of service line for electrificationand station premises. The service line shall be 2 core-16 mm sq. Armoured Aluminium XLPE cable including suitable size & rating of thimbles to be drawn from electric transformer sub-station/main panel board to sub-main panel board or as per requirement. The cable shall be provided with manufactures test certificate.
15Providing and fitting of MCBs for electrical circuit with 63A as incomer, 10A MCBs for lighting circuits, floodlighting, etc, 20A MCB for heating circuits. The MCBs shall be mounted on a MCB distribution box 10-way fitted on panel board for central control of electrification of pump house and station premises. (MCB makes: Havells/ Legrand/ L&T/ Schneider.
16Supply of Fire extinguisher ABC powder type (stored pressure) of 4 kg capacity with following feature 1) IS certified as per IS 15683, 2) Operating temperature 0 to 55 degrees with MAP powder complete in all respects suitable for all types of fires particularly electrical fires. Wall hook and discharge pipe shall be supplied along with cylinder
17Providing and fitting of 2 KWAVR/SERVO Voltage Stablizer of reputed make.
18Tool Kit: - The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of Taparia make: Double ended Spanner of Size (6/7 to 30/32) (01 complete set) Ring Spanner Set of Size (12/13 to 30/32) (01 complete set) Cutting Pliers, 8 inch: (03 No`s) Nose Pliers 8 inch: (03 No`s) Screw Driver 12 inch / 8 Inch / 6 Inch/4 inch :( 02 No`s Each Size) Hammer, I Kg and ½ kg: (01 No each) Heavy duty Pipe Wrench 12 inch&8 inch: (02 No’s each) Bearing puller (sizes 6 & 8): (01 no. each) 1. Spirit level (600mm): 01 no. 2. Digital clamp meter (400A AC range): 01 no. (Meco/Rishabh/ Fluke make) Make: BARIGO / HTC Aluminium ladder telescopic type 20ft
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail