Public Works Department-PWD has published Tender For Renovation Of Different M.I. Schemes Under 48 Karamcherra St Constituency Within The Jurisdiction Of Wr Sub Division Manu During The Year 2023 24 S.H Repairing Of Pump Motor Suction Delivery Electrical Equipments Etc. 2Nd Call.. Submission Date for this Tender is 24-01-2024. Pump repair and Maintenance Tenders in Dhalai Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismental of horizontal pump and motor of 20/25 HP from the base and carrying the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineer-in-charge. |
| 2 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. 125/150 mm ? |
| 3 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. 125/150 mm ? |
| 4 | Supplying & fitting fixing of GI . bend of approved quality |
| 5 | 125 mm dia |
| 6 | 150 mm dia |
| 7 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-in- Charge. |
| 8 | 150 mm dia nominal bore(medium) |
| 9 | 125 mm dia nominal bore(medium) |
| 10 | Providing and fixing G.I. pipes medium class as per IS : 1239with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer- in - charge. |
| 11 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. |
| 12 | Providing and fixing 40 mm dia following fittings as per direction of the Engineer in Charge. |
| 13 | a) Full way valve (Brass make) |
| 14 | b) Union joint (GI) |
| 15 | c) Elbow (GI) |
| 16 | d) Tee (GI) |
| 17 | Labour charge for repairing of 150 mm dia foot valve by welding into net including supplyies and fitting fixing of C.I. Plate C.I. Weight, M.S. Nuts and bolts and refitting the foot valve after making good as per direction of the Engineer-in-charge. |
| 18 | Providing & fitting fixing of foot valve washer of approved quality. |
| 19 | Labour charge for lifting of hose pipe from river bad by dismantling of G.I. suction line and refitting the same after cleaning the pipe with necessary filling etc. complete as per direction of the Engineer in charge. |
| 20 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. |
| 21 | 150 mm dia |
| 22 | 125mm dia |
| 23 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality. |
| 24 | 150 mm dia |
| 25 | 125mm dia |
| 26 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. 150 mm dia |
| 27 | Providing and fixing MS bolts including nuts and washers complete as per standard design:- Above 300mm length.- |
| 28 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. 150 mm dia |
| 29 | Providing & fitting fixing C.I tail piece of approved quality at site of work., 150 mm dia |
| 30 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality. 150 mm dia |
| 31 | Providing & fitting fixing C.I foot valve weight 150mm dia at site of work of approved quality |
| 32 | Providing & fitting fixing C.I foot valve net 150mm dia at site of work of approved quality. |
| 33 | Labour charge for checking the panal board and making safe including dismantling and refitting fixing of wire and electrical equipments and reconstruction etc complete as per direction of the engineer in charge. |
| 34 | Supplying & fitting fixing manually operated oil immerged starter of approved quality. a) 30 Hp Osco/BCH Make |
| 35 | Providing & fixing 200 Amps busber of size 600x450x100 mm with 4 nos copper strip of size 450x40x4 mm of approved quality. |
| 36 | Repairing of 15/20/25 HP starter by dismantling in/c changing of magnetic coil, connecting finger, oli finger rod etc complete and refitting fixing the same as per direction of the Engineer-in-charge. |
| 37 | Repairing charge of busber including changing of copper strip with neccesary screws,nuts, washer including proper reconnection and wiring etc. complete as per direction of the engineer in charge. |
| 38 | Labour charge for dismentling of 200-A main switch and refitting fixing the same after repairing i.e. Chanding of H.R.C fuse, cutout, connecting rod, backlite plate, finger, insulated iron, handle i.e as require and making good as per direction of the Engineer-in-charge. |
| 39 | Repairing of 63 amps sub-main switch providing all kit kat and kit kat base and repair where necessary in/c fitting fixing and testing complete. |
| 40 | Dismentaling of pump for overhauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs.in two spell complete as per direction of the Engineer-in-charge. |
| 41 | Providing & fitting fixing Pump Shaft of approved quality. |
| 42 | Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump |
| 43 | Providing & fitting fixing coupling/ impeller Key of approved quality. |
| 44 | Providing & fitting fixing Casing ring of approved quality |
| 45 | Providing & fitting fixing C.I. gland of approved quality |
| 46 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. |
| 47 | 6305 Ball bearing (TATA /SKF) |
| 48 | 6306 Ball bearing (TATA /SKF) |
| 49 | Reparing of 125mm dia sluice valve by dismentling in/c changing of sluice valve spindle, key, gasket, nuts and bolts etc. and refitting fixing the same after making good in the exisitng delivery line as per direction of the Engineer in charge. |
| 50 | Labour charge for dismentling of 125mm dia non-return valve and refitting fixing the same after proper washing and ressemling the C.I seperator plate etc as per direction of the engineer in charge |
| 51 | Repairing of pump shaft by welding, polishing etc complete as per direction of the Engg-in-Charge. |
| 52 | Labour charge for dismantling, turning making alignment of pump motor shaft for suitable fitting coupling,bearing,sleeve bush etc as per direction of the Engg-in-Charge. |
| 53 | Repairing of impeller by welding, polishing etc complete as per direction of the Engg-in-Charge. |
| 54 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. |
| 55 | 150 mmf |
| 56 | 190 mmf |
| 57 | 225 mmf |
| 58 | Providing & fitting fixing coupling nuts & bolts (all Size) of approved quality. |
| 59 | Providing & fitting fixing coupling rubber bush (All Size) of approved quality. |
| 60 | Providing & fitting fixing coupling star bush (All Size) of approved quality. |
| 61 | Providingand fitting fixingof sleave bushof approved quality |
| 62 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge |
| 63 | Supplying and greasing/applying of grease in wheel bearing complete as per direction of Engineer-in-charge. |
| 64 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. |
| 65 | Supplying of Transformer oil for starter as per direction of the Engineer-in-charge. |
| 66 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.Size 1.80X1.20X0.025 mtr. |
| 67 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt, complete as per direction of Engineer-in-Charge |
| 68 | Current range 63 Amps. |
| 69 | Current range 200 Amps |
| 70 | Supplying and fitting fixing AC Voltmeter (Moving Iron) on the panel board of approved quality. SMI-144, Range 0-400 to 0-500 |
| 71 | Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality.SMI-144, Range 0-10A |
| 72 | Supplying & fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
