Northern Coalfields Limited-NCL has published Tender For Annual Operation , Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complexes At Amlohri For 02 Years. Submission Date for this Tender is 23-01-2024. Electrical Maintenance Tenders in Singrauli Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 19-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-01-2024 |
Sl. No. | Item Description |
1 | Chlorination plant |
2 | Supply of liquid chlorine( Hypochlorite base formulation) for treatment of drinking water purpose confirming to IS 10500: 1991 |
3 | Supply, installation and commissioning of fully automatic on line chlorination plant incorporated with proportionate programmable dosing controller and water flow sensing system including maintenance for one year all complete |
4 | Horticulture |
5 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
6 | Renovating lawns including weeding, cheeling the grass, forking the ground,top dressing with sludge or manure, mixing the same with forked soil,watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately) |
7 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
8 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). |
9 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment). |
10 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
11 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
12 | Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge |
13 | Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge |
14 | Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials shall be provided by the department) as per direction of officer in charge |
15 | Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning,cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials shall be provided by the department) as per direction of officer in charge |
16 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately) |
17 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
18 | Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge. |
19 | Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge |
20 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge |
21 | Providing and displaying of Chamaedorea elegans palm plant, having ht. 60 cm to 75 cm, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot . & as per direction of the officer-in-charge |
22 | Providing and displaying of Croton Baby Golden Punctatumaureum plant, having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge |
23 | Providing and displaying of Croton petra Banglore variety plant, having ht 45 cm & above, well developed with fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge |
24 | Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge |
25 | Providing and displaying of Raphis palm plant, having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed, full of fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-incharge. |
26 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge |
27 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge |
28 | Providing and Displaying Traveller palm plant well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge |
29 | Providing and Displaying Adenium Obesum grafted plant well developed with fresh & healthy 30 to 60 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge |
30 | Providing and stacking of Euphorbia milli hybrid variety plant, having ht.30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge |
31 | Supply and stacking of Bottle palm plant of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge |
32 | Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge |
33 | Supply and stacking of plant Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm as per direction of the officer-in-charge |
34 | Supply and stacking of Passiflora caerulea (Rakhi bel) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge |
35 | Supply and stacking of Clerodendrum thompsonae plant of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge |
36 | Carriage of Materials by mechanical transport including loading,unloading and stacking: Lead up to 1 km Lime, moorum, building rubbish |
37 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Alyssum |
38 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Cineraria dwarf hybrid |
39 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double |
40 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Dianthus hybrid |
41 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Gerbera hybrid double |
42 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Antirrhinum dwarf |
43 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold Inca hybrid |
44 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Nasturtium |
45 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid |
46 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid |
47 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Phlox mix colour hybrid |
48 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Poppy double |
49 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Salvia Hybrid different colour |
50 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Aster dwarf |
51 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Calendula double |
52 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double |
53 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Balsam seedling |
54 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Zinnia hybrid |
55 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Celosia argentea & Celosia crostata Hybrid |
56 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Cosmos hybrid |
57 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Gaillardia Double |
58 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Kochia |
59 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Portulaca hybrid |
60 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge.Vinca Hybrid |
61 | Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower in 20 cm Earthen Pot, |
62 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep |
63 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm |
64 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height |
65 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) 2.40.1 Permanent office accommodation (as per yard stick 1Mali =1.25Acre) |
66 | Permanent office accommodation. (as per yard stick 1Mali =1.25Acre) |
67 | Prestigiousworks/H.M.house&officersentitledtofreeaccommodation |
68 | Play grounds / Public parks (as per yard stick 1Mali =2.00Acre) |
69 | Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing group) |
70 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Trees Plant |
71 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Shrubs Plant |
72 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Hedge Plant |
73 | Horticulture Part B |
74 | Bonemeal |
75 | DAP |
76 | Malathion |
77 | Neem Cake |
78 | Rogar 30% |
79 | Rose Mixture |
80 | Sarso Khali |
81 | Urea |
82 | Civil Mainetenance |
83 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
84 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming ,watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. |
85 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, includinggetting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming ,watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
86 | Excavating, supplying and filling of local earth (including royalty) by mechanicaltransport up to a lead of 5km,rammingandwatering of the earth inlayers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
87 | Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge. |
88 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
89 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling and dressing and finishing the top smooth. |
90 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). |
91 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately). |
92 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws |
93 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
94 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
95 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc.complete:125x75x4 mm |
96 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x63x4 mm |
97 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
98 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
99 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
100 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
101 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
102 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm |
103 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
104 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² |
105 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m² |
106 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete :With residual type petroleum bitumen of grade VG -10 |
107 | Removing and uprooting of unwanted vegetation grown over the drainage pipe, walls, chhajjas, balcony and similar location of building upto floor Vth level with all tools & plants required with safety precaution and making good the same with plaster including disposal of material/tree roots etc. at the required place all complete as per instruction of EIC. |
108 | Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows |
109 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
110 | Disconnecting damaged overhead / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
111 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm |
112 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
113 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
114 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
115 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore |
116 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore |
117 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
118 | 13.71 Lettering with black Japan paint of approved brand and manufacture |
119 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
120 | lettering with black Japan paint of approved brand and manufacture |
121 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
122 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Renewal of old putty of glass panes (length). |
123 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
124 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
125 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
126 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
127 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
128 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
129 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
130 | Carriage of materials by mechanical transport including loading, unloading and stacking at dump area.Lime, moorum ,building rubbish.Lead up to 1.00 km. |
131 | CARRIAGE OF MATERIALS Carriage of material by Mechanical Transport including loading, unloading and stackingEarth Lead - 1 Km |
132 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
133 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
134 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
135 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube. |
136 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece. |
137 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
138 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. |
139 | Granite of any colour and shade Area of slab over 0.50 sqm |
140 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.25 mm thick with 12.5 mm nominal size stone aggregate |
141 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.75 mm diameter |
142 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter |
143 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Coupler75mm |
144 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Coupler110mm |
145 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Bend 87.5°75 mm bend |
146 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend |
147 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Shoe (Plain)75 mm Shoe |
148 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe |
149 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.75 mm |
150 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
151 | 12 mm cement plaster of mix : 1:4 (1 cement:4 fine sand) |
152 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
153 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) |
154 | White washing with lime to give an even shade : New work (three or more coats). |
155 | Colour washing such as green, blue or buff to give an even shade :New work (two or more coats) with a base coat of white washing with lime |
156 | Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
157 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work. |
158 | 12 mm cement plaster finished with a floating coat of neat cement of mix1:4 (1 cement: 4 fine sand) |
159 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1 cement : 4 fine sand). |
160 | White washing with lime to give an even shade :Old work (two or more coats) . |
161 | White washing with lime to give an even shade : Old work (one or more coats) |
162 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (one or more coats) |
163 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm. |
164 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 5.5 mm . |
165 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :One or more coats on old work. |
166 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
167 | French spirit polishing :One or more coats on old work. |
168 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer"s specification. 13.108.1 One or more coats on old work |
169 | Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
170 | Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
171 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
172 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below |
173 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
174 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm. |
175 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..In cement mortar |
176 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
177 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
178 | Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250 mm |
179 | Providing and fixing soil, waste and vent pipes :100 mm dia.Sand cast iron S&S pipe as per IS: 1729. |
180 | Providing and fixing soil, waste and vent pipes :75 mm diameter :Sand cast iron S&S pipe as per IS: 1729. |
181 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :75 mm dia pipe |
182 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe |
183 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe |
184 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 75 mm dia pipe |
185 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS - 1729 |
186 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75 mm diaSand cast iron S&S as per IS - 1729 |
187 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x100x100 mmSand cast iron S&S as per IS - 1729 |
188 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :75x75x75x75 mmSand cast iron S&S as per IS - 1729 |
189 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mmSand cast iron S&S as per IS - 1729 |
190 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75x75x75 mmSand cast iron S&S as per IS - 1729 |
191 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand Cast Iron S&S as per IS: 1729 |
192 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
193 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore |
194 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore |
195 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work.25 mm dia nominal bore |
196 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. |
197 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil. |
198 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
199 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
200 | Grading roof for water proofing treatment withCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
201 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size) |
202 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominalsize). |
203 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.Cold twisted bars |
204 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
205 | Trimming of tree branches in colony/plant and near boundary wall including disposal of brances outside the periphery of the colony and plant area as per instruction of EIC. |
206 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood |
207 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
208 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 75 mm |
209 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper. |
210 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters. |
211 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick |
212 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters. |
213 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 18 mm thick |
214 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick . |
215 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
216 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
217 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels plates etc including weilding, grinding buffing poilshing and making curvature( Whever requried) and fitting with necessary accessories & stainless stell dash fasteners, stainless stell bolts etc of requried size on the top of floor or side of waist slap with suitable arrangement as per approval of EIC ( for apyment purpose only weight of stainless steel members shall be considered excluding fixing caccessories susch as nuts bolts and fasterners) |
218 | Providing and fixing hand rail of approved size by weilding etc to steel ladder railing balcony railing stair case railing and similar works including applying priming coat of approved steel primer M.S. tube |
219 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:30 mm thick shutters.With ISI marked stainless steel butt hinges of required size - Kiln seasoned and chemically treated hollock wood. |
220 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type) |
221 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
222 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Kiln seasoned and chemically treated hollock wood.30 mm thick shutters |
223 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 lever sand a pair of lever handles of approved quality with necessary screws etc. complete. |
224 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
225 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. |
226 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm |
227 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
228 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm |
229 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :75x47x1.70 mm |
230 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :50x37x1.50 mm |
231 | Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm. |
232 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm |
233 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
234 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm |
235 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm |
236 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :100x10 mm |
237 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm |
238 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm. |
239 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm |
240 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm |
241 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm |
242 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :75 mm . |
243 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm |
244 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 90 mm |
245 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Kiln seasoned and chemically treated hollock wood. |
246 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25 mm thick with 12.5 mm nominal size stone aggregate |
247 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compoundconsisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry |
248 | Repair of seepage from building due to growth of trees and insertion of roots in walls/slab including removal of trees and its roots by dismantling the walls roof whereever required and making good the walls/roof with PCC 1:2:4 and cement mortar 1:4 including disposal of debris etc and with all leads and lift complete as per instruction of EIC |
249 | Cleaning of CI/AC chocked pipe 100 mm diameter |
250 | Providing and fixing steel grating jali 100 mm |
251 | Half brick work with non-modular fly -ash-lime brick (FALG bricks) confirming to IS: 12894,class designation 7.5average compressive strength etc. complete in all respect in foundation & plinth in cement morter 1:4(1 cement: 4 coarse sand) |
252 | Half brick work with non-modular fly -ash-lime brick (FALG bricks) confirming to IS: 12894,class designation 7.5average compressive strength etc. complete in all respect in super-structure above plinth level up to floor V level inin cement morter 1:4(1 cement:4 coarse sand) |
253 | Brick work with non-modular fly -ash-lime brick (FALG bricks) confirming to IS: 12894,class designation 7.5average compressive strength etc. complete in all respect in foundation & plinth in cement morter 1:6(1 cement: 6 coarse sand) |
254 | Brick work with non-modular fly -ash-lime brick (FALG bricks) confirming to IS: 12894,class designation 7.5average compressive strength etc. complete in all respect in super-structure above plinth level up to floor V level inin cement morter 1:6(1 cement: 6 coarse sand) |
255 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarsesand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand) |
256 | Roof top water tank cleaning |
257 | Cleaning of roof top water tank, including draining out water, cleaning, disinfecting the tank by bleaching powder etc. and washing the tanks with fresh water, writing of cleaning date with paint on the outer face of the tank all complete with tools, tackles and consumables as per instruction of EIC |
258 | Cleaning of ground water reservoir/ over head tank including scraping of stains and muck from wall & floor and removal of muck from reservoir, disinfecting the tank by lime/bleaching powder etc, and washing the tank with fresh water, writing the cleaning date with paint on the outer surface of the tank all complete with tools, tackles and consumables as per instruction of EIC |
259 | Upkeeping and Sanitation |
260 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
261 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
262 | Carriage of materials by Mechanical Transport including loading, unloading and stacking- lead up to 1km- Lime, moorum, building rubbish |
263 | CARRIAGE OF MATERIALS Carriage of material by Mechanical Transport including loading, unloading and stackingEarth Lead - 5 Km |
264 | Carriage of materials by Mechanical Transport including loading, unloading and stacking- lead up to 1km- Manure or sludge |
265 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. - All kinds of soil. |
266 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. : All kinds of soil |
267 | Cleaning of surface drain including disposal of muck/ sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks)with in a lead of 1 KM complete with all tools & tackles as per instruction of EIC.- Up to 300mm wide |
268 | Cleaning of surface drain including disposal of muck/ sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks)with in a lead of 1 KM complete with all tools & tackles as per instruction of EIC.- Above 300 mm & up to 600 mm wide |
269 | Cleaning of surface drain including disposal of muck/ sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks)with in a lead of 1 KM complete with all tools & tackles as per instruction of EIC.- Above 600mm wide |
270 | Collection of garbage from door to door & disposal of the same through trolley or other suitable arrangement to the sprcified place within a lead of 1 KM including sweeping of staircase (for 1st and 2nd floor qtrs) with all tools and tackles as per instruction of EIC.- Ground Floor |
271 | Collection of garbage from door to door & disposal of the same through trolley or other suitable arrangement to the sprcified place within a lead of 1 KM including sweeping of staircase (for 1st and 2nd floor qtrs) with all tools and tackles as per instruction of EIC.- First Floor |
272 | Collection of garbage from door to door & disposal of the same through trolley or other suitable arrangement to the sprcified place within a lead of 1 KM including sweeping of staircase (for 1st and 2nd floor qtrs) with all tools and tackles as per instruction of EIC.- Second Floor |
273 | Cleaning of toilet including WC pan, wash basin, other fittings if any for "B" & lower type quarters by hand dusting and cleaning with soap solution, acids and phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles as per instruction of EIC. |
274 | Cleaning of toilet including WC pan, wash basin, other fittings if any for C type quarters by hand dusting and cleaning with soap solution, acids and phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles as per instruction of EIC. |
275 | Cleaning of toilet including WC pan, wash basin, other fittings if any for D type quarters by hand dusting and cleaning with soap solution, acids and phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles as per instruction of EIC. |
276 | Cleaning of toilet attached with hostel rooms, office chambers etc including cleaning of floors, skirting & dado, WC pan (Indian/European type), wash basin, shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc to make the toilet clean and hygienic and providing nepthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC (for community and service building) |
277 | brooming cleaning of all roads in colony and within premises of service building and other places as required with all tools & tackles and stacking the garbage at specified place as per instruction of EIC |
278 | Cleaning of general/ common toilet including cleaning of wc pan (indian /European type) wash basin,urinals by hand dusting and cleaning with shop salution acids, deodarent phenyl etc to make the toilet clean and hyginic and providing naphthalene balls in urinals complete with all tools trackles & consumables as per instructions EIC |
279 | Cleaning of all type of roof including removal of dry leaves, weedings and cleaning drain holes, brooming etc all complete with tools & tackles and stacking the garbage at specified places as per instruction of EIC |
280 | Cleaning, mopping & washing of floor of public buildings, other places neatly with detergents, bleaching powder etc all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of EIC |
281 | Cleaning of door shutter, window shutters including chowkhats, window grills, glass panes, cabwebs etc of service/community buildings with necessary detergents, chemical etc complete as per instruction of EIC |
282 | Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into with adequate quantity of salt lime,bleaching powder etc and refilling the pit with earth all complete with tools, tackles and consumables as per instruction of EIC. - Small animal (Dog, cat, fox, pig, birds and the like) |
283 | Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into with adequate quantity of salt lime, bleaching powder etc and refilling the pit with earth all complete with tools, tackles and consumables as per instruction of EIC. - Big animal (Cow, Buffalo, Ox, and the like) |
284 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Above 240 cm girth |
285 | Water Supply |
286 | Regular operation controlling valves providing in water supply pipe line to various sector of residential quarter service building situated in Permanent township including operation of pump with T&P all Complete as per EIC ( Filter 3 nos, Valve man 10 Nos) in all three shift. |
287 | Providing and fixing corner glass shelf(with bracket) of Jaguar make or equivalent.(ACN-1173) |
288 | Providing and fixing single lever wall mixer with provision of hand shower ,but without hand shower( Jaguar make or equivalent)(KUP-35119PM) |
289 | Providing and fixing Maze overhead shower 300mm round shape single flow(body & face plate stainless steel with chrome finish)with rubit cleaning system ( Jaguar make or equivalent)(OHS-CHR-1633) |
290 | Providing and fixing rimless single piece Wc with UF soft close seat cover,tornado flushing,hinges, fixing accessories set,cistern fittings,S-trap 300mm. ( Jaguar make or equivalent)(OPS-WHT-15851SN) |
291 | P&F wall under counter wash basin oval shape of Jaguar make or equivalent complete in all respect as per EIC. |
292 | Providing and fixing swivel mirror of Jaguar make or equivalent.(ACN-1195N) |
293 | Providing and fixing towel rack with lower hanger (stainless steel)with hook.Jaguar make or equivalent(AHS-1581H) |
294 | P&F CP brass bib cock of Jaguar make or equivalent complete in all respect as per EIC. |
295 | P&FCP brass Angular stop cock of Jaguar make or equivalent complete in all respect as per EIC. |
296 | P&F CP brass waste coupling of Jaguar make or equivalent complete in all respect as per EIC. |
297 | P&F PVC water tank cover including fixing and fiiting complete in all respect |
298 | Providing Sunmica for wood work as per instruction of EIC. |
299 | Providing and fixing Aquafree urinal Kit (Hindware make or equivalent) for water less urinals complete in all respect as per instruction of EIC |
300 | Providing and fixing seat cover wall hung (WC) (Hindware make or equivalent) complete in all respect as instruction of EIC. |
301 | Labour rate for fixing G.I. pipes complete with G.I. fittings and making good the walls etc.Internal work - Exposed on wall 15 to 40 mm dia nominal bore |
302 | Labour rate for fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. |
303 | Providing and fixing bolts including nuts and washers complete. |
304 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
305 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
306 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
307 | Supplying pig lead at site of work |
308 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
309 | 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
310 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board. 610x460 mm bowl depth 200 mm |
311 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm |
312 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
313 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid. |
314 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450 mm. |
315 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm. |
316 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 32 mm dia |
317 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. 40 mm dia |
318 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
319 | Providing and fixing C.P. Brass pillar cock |
320 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms each 390.20 |
321 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall.15 mm dia nominal bore. |
322 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall.20 mm dia nominal bore. |
323 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall.25 mm dia nominal bore. |
324 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall.40 mm dia nominal bore. |
325 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work25 mm dia. nominal bore |
326 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work40 mm dia. nominal bore |
327 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.50 mm dia nominal bore. |
328 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia nominal bore. |
329 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore. |
330 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore. |
331 | Providing and fixing brass stop cock of approved quality :20 mm nominal bore. |
332 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. |
333 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore. |
334 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
335 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet.100 mm diameter. |
336 | Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class):Up to 300 mm dia. |
337 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :Up to 300 mm dia |
338 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :100 mm dia pipe. |
339 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :150 mm dia pipe. |
340 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :200 mm dia pipe. |
341 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe |
342 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 150 mm diameter pipe |
343 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 200 mm diameter pipe |
344 | Providing and fixing C.I. sluice valves(with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 100 mm diameter. Class I |
345 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 150 mm diameter. Class I |
346 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) : 200 mm diameter. Class I |
347 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)15 mm nominal bore |
348 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)20 mm nominal bore |
349 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)25 mm nominal bore |
350 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)40 mm nominal bore |
351 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)50mm nominal bore |
352 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. |
353 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore. |
354 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore. |
355 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore. |
356 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :50 mm nominal bore. |
357 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :80 mm nominal bore. |
358 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore. |
359 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore |
360 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
361 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 90 mm long. Weighing not less than 93 gms. |
362 | Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
363 | Providing and fixing PTMT stop cock of approved quality and colour.20mm nominal bore, 89 mm long. Weighing not less than 88 gms. |
364 | Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms. |
365 | Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms. |
366 | Providing and fixing PTMT grating of approved quality and colour. Circular type.100 mm nominal dia . |
367 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms. |
368 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.25 mm nominal bore, 152 mm long, weighing not less than 440 gms. |
369 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall15 mm nominal outer dia. Pipes. |
370 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall20 mm nominal outer dia. Pipes. |
371 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall25 mm nominal outer dia .Pipes. |
372 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. |
373 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms. |
374 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms. |
375 | Regulating necessary controlling valves provided in the water supply pipe line to various sector of residential quarters, service building etc. situated in permanent township including routine maintenance and repairing of external pipe lines &valves of all size by deploying man power as required including necessary T& P etc. all complete as per instruction of EIC. The following man power is to be engaged for day to day work.Fitter -01 No. Helper/Valve man -02 Nos |
376 | GI Plug 20 mm |
377 | Jumper Washer |
378 | Repairing of existing bib cock/ stop cock of differentbuildingincluding necessary washer,etc as per instruction of EIC |
379 | GI nipple 15mm |
380 | GI Plug 25mm |
381 | Providing and fixing GI Nipple of 25 mmdia. |
382 | syphon washer for cistern |
383 | Rectification/ cleaning of chocked internal/G I pipe above 25 mm dia. |
384 | Rectification/ cleaning of chocked external/G I pipe up to25 mm dia. |
385 | GI nipple 20mm |
386 | Supply of GI socket 15mm |
387 | Supply of GI socket 20mm |
388 | GI elbow 15mm |
389 | GI elbow 20mm |
390 | Repairing of existing high/low level Cistern including small consumables e.g. washer,nut etc as per instruction of EIC |
391 | GI Tee 15mm |
392 | Steel Jali 100 mm |
393 | Providing and fixing GI Socket of 25 mm dia. |
394 | Providing and fixing GI Nipple of 40 mm dia. |
395 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms |
396 | Providing and fixing GI Elbow.25 mm dia |
397 | GI Tee 20mm |
398 | Bib cock/Pillar cock washer |
399 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25 mm nominal bore, weighing not less than 62 gms |
400 | Handle and lever for low level cistern |
401 | Providing and fixing GI Tee of 25mm dai. |
402 | P/f GI Tee 40 mm |
403 | C.I. bracket for wash basin and sinks pair . |
404 | Providing and fixing GI Elbow.40 mm dia |
405 | Providing and fixing PVC waste pipe for sink and wash basin including PVC waste fitting complete.Flexible pipe 32 mm |
406 | Providing and fixing PTMT waste coupling for sink and wash basin, of approved quality and colour, waste coupling 31mm dia of 79 mm length and 62 mm breadth weighingnot less than 45 gms. |
407 | Providing and fixing PTMT Waste coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
408 | Providing and fixing reducing socket of 50 mm to smaller size. |
409 | P/f GI socket 50mm |
410 | Providing and fixing GI Elbow.50 mm dia |
411 | Providing and fixing GI Nipple of 50 mm dia. |
412 | Providing and fixing GI bend of 50 mm dia. |
413 | Providing C I/G I flange for different dia pipe. 50 mm dia. |
414 | Providing and fixing rubber packing 5mm thick complete as per instruction of EIC |
415 | P/f GI flange 50mm |
416 | Providing C I/G I flange for different dia pipe. 80 mm dia. |
417 | Providing and fixing nuts, bolts for flange of approved quality as per instruction of EIC |
418 | syphon for low level cistern |
419 | Providing and fixing GI Tee of 50 mm dai. |
420 | P/f GI reducer 80 to 25 mm |
421 | Providing C I/G I flange for different dia pipe. 100 mm dia. |
422 | Supply of gland packing for C I Sluice valve 6mm to 20 mm thick of approved quality as per instruction of EIC |
423 | P/f GI socket 80mm |
424 | Providing and fixing 15 mm CP brass pillar taps |
425 | Supplying of grease |
426 | P/f GI reducer 100 to 25 mm |
427 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall40 mm nominal outer dia. Pipes. |
428 | Providing C I/G I flange for different dia pipe. 150 mm dia. |
429 | Providing and fixing GI Tee of 80 mm dai. |
430 | Supply of bal bearing for repairing of installed pumps in pump house P/T Amlohri DS 6307 |
431 | Supply of S.S Spindle with check nuts suitable for CI Sluice valve.50 mm dia. |
432 | Supply of bal bearing for repairing of installed pumps in pump house P/T Amlohri DS 6308 |
433 | Supply of bal bearing for repairing of installed pumps in pump house P/T Amlohri DS 6309 |
434 | Supply of S.S Spindle with check nuts suitable for CI Sluice valve.80 mm dia. |
435 | Supply of S.S Spindle with check nuts suitable for CI Sluice valve.100 mm dia. |
436 | Supply of S.S Spindle with check nuts suitable for CI Sluice valve.150 mm dia. |
437 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
438 | Providing and fixing CI Sluice valves (with cap) complete with bolts,nuts,rubber insertions etc( the tail piece if required will be paid separately).50 mm diameter class I. |
439 | Providing and fixing CI Sluice valves (with cap) complete with bolts,nuts,rubber insertions etc( the tail piece if required will be paid separately).80 mm diameter class I. |
440 | Brick work with non modular fly ash lime brickconmforming to IS 12894, class designation 7.5 average compressive strength etc. completion all respect - in foundation below plinth level upto floor V level .in cement mortar 1:6( 1cement : 6 coarse sand ) |
441 | Providing and fixing C I foot valve 125 mm dia |
442 | Providing anf fixing brass hand faucet (Tapsteq CP Health faucet Hand Shower) |
443 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
444 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
445 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
446 | Pest/Mosquito Control |
447 | Anti adult measures: General disinfection/pest control with new generation odourless, colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies,etc. using Residential spray of Deltamethrin 2.5% SC flow (K-othrine or approved equivalent) insecticides should be sprayed uniformly over the surfaces of walls, ceilings, etc. Frequency- Once in 3 months |
448 | Anti Adult Measures-General disinfection/pest control with a new generation odourless ,colourless insecticides which should be safe for human being and effective for all kind of household insects like mosquitos , houseflies etc.Using residual spray of Cyfluthrin5%EW(Solfac EW OSO or approved equivalent ) . Insecticides should be sprayed uniformly over the surfaces of wall,ceiling,etc.Frequency -once in 3 month |
449 | General Disinfection /sanitization with 1 % Sodium Hypchlorite solution which should be safe for human being using spray machine/pumps or any other suitable means over surface of wall,floors etc. As per instruction of EIC. |
450 | Supply of PPE kit (Reinforced and polycoated)for draping the sparaying persons (as and when required) |
451 | Thermal fogging using insecticides deltamethrine 1.25% ULV(King fog or approved equivalent) mixed with diesel in the ratio of 1:199 for outdoor operation of colony, etc. |
452 | Anti Larvac measures- Treatment by using diflubenzuron 25% WP(Bi-Larv or approved equivalent) solution to be spread as per instruction of EIC. Frequency- Weekly |
453 | Supply of Bleaching Powder |
454 | Management Team |
455 | Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-incharge or his representative. (26 days) - One No. |
456 | Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. (26 days) 02 Nos |
457 | ELECTRICAL |
458 | Supply of 6 pin, 15/16 & 5/16 amp socket outlet, piano type, ISI marked. |
459 | Supplyof15ampsswitchsocket combined flash type,isi marked. |
460 | Supply of SP 15/16 Amps, one way switch, piano type, ISI marked. |
461 | Supply of 3/5 pin, 5/6 amp socket outlet, piano type, ISI marked. |
462 | SupplyofSP5/6Amps,oneway switch, piano type, ISI marked . |
463 | Supplyofcasingcapping½” standard make. |
464 | Supplyofcasingcapping1” standard make. |
465 | Supply of Bell Push,Piono type |
466 | Supply of Teak Wooden Board with ply , 10cmx10cmx4cm |
467 | Supply of Teak Wooden Board with ply , 18cmx10cmx4cm |
468 | Supply of Teak Wooden Board with ply , 20cmx15cmx4cm |
469 | Supply of Teak Wooden Board with ply , 25cmx20cmx4cm |
470 | Supply of Sun mica Sheet 8 inch x 10 inch |
471 | Supply of Sun mica Sheet 10 cmx10 cm |
472 | Supply of Sun mica Sheet 18 cm x 10 cm |
473 | Supply of Sun mica Sheet 20cm x 15cm |
474 | Supply of Piano type Non Modular domestic fan regulator as per 11037 |
475 | Supplying of ISI Maerked and accepted standard of Miniature Circuit Breaker (MCB) “C” series suitablfor240/415volts,50cycle ,10ka Value AC supplyconfirming to IS:8828:1996,IEc:60898:2002 but without enclosures. For Triple Pole &Neutral (TPN), 50Amp to 63 Amp Rating. |
476 | Supply of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3Phase ,3Pole, 50Hz,415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS-8828 MCCB with Breaking Capacity 25 KA at 415volt, current Rating-125 Amps & 80%-100% adjustable |
477 | Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3Phase,3Pole,50Hz,415 Volts,AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard confirming to IS-8828 MCCB with Breaking Capacity35 ka at 415 volts, Current Rating-200 Amps & adjustable 80%-100% |
478 | Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3Phase,3Pole,50Hz,415 Volts,AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard confirming to IS-8828 MCCB with Breaking Capacity35 ka 4at 415 volts, Current Rating- 400 Amps & adjustable 80%-100% |
479 | Supply of Switch Fuse unit (Rewirabletype)Twopole,240 Volt,32 Amps ISI Marked |
480 | Supply of TPN 63 Amp, MCB, AC, Breaking capacity-36 KA at 415 volt |
481 | Supply of Switch-Disconnector (Isolator) 100 Amps double pole, Standard make ,230 volt |
482 | SupplyofCondensar,2.5mfd,230 Volts AC |
483 | Supply of PVC insulation tape, size- 19mm x 9.15 mtr. |
484 | Supply of Angle Bulb Holder |
485 | Supply of Plug top,15 Amp,230 volts, 3-pin type |
486 | Supply of ISI marked FRLS PVC insulated single core, copper wire,1.5Sqmm, single core |
487 | Supply of ISI marked FRLS PVC insulated single core, copper wire,2.5Sqmm, single core |
488 | Supply of ISI marked FRLS PVC insulated single core, copper wire,4Sqmm, single core |
489 | Supply of ISI marked FRLS PVC insulated single core, copper wire,6Sqmm, single core |
490 | SupplyofMSnutandbolts 5/8”x2.5-4” |
491 | Supply of Stay insulator 11KV grade. |
492 | Supply of GI earth/stay wire,7/10- 7/14 SWG |
493 | Removing and fixing of electrical consumable items in residential quarters, service buildings (MQ- 320,NMQ-672,B-type-216,NB– type-78, C –type-68,D,type-16, GM Banglow, Gm office, Officers Club , |
494 | HI-Tech Guest House, Workers Club Kalyanmandap, Junior Rest House, Telephone Exchange, School ,CISF Barrack etc.) by engaging 04 (Four) manpower consisting of 02 skilled (Electrician) & 02 Unskilled (Helper) per day for 730 days to attend the daily complaints of above mentioned location. |
495 | Attending no power of residential quarters and service buildings, service connection, jumpering of LT O/H line & HT O/H line (6.6 KV) including changing of pin , shackle insulators and power cable connection of sector sub-station by engaging 04 (Four) manpower consisting of 02 skilled (Electrician) & 02 unskilled (Helper) per day for 730 days. |
496 | Annual maintenance of street lighting of township including feeder road from Nawanagar to CISF control room (Old GM office), CISF unit line and Weigh Bridge premises of sand plant at Amlohri Project by engaging 04 (Four) manpower consisting of 02 skilled (Electrician) & 02 unskilled (Helper) per day for 02 years. |
497 | Repair and maintenance of window/split air conditioners , water coolers and refrigerators installed at different establishment of Amlohri Project by engaging 02 AC technician (Skilled) and 01 Helper (unskilled) per day for two years from March to October every year.(Excluding Sunday) |
498 | Repair and maintenance of Geyser, refrigerators installed at different establishment of Amlohri Project by engaging 01 technician (Skilled) per day for two years from January to February every year. (Excluding Sunday) |
499 | Erection of Rs joist pole/H beam/steel tubular pole/steel rail pole of length exceeding 10mtrs but not exceeding 13mtrs in cement concrete M-10(1 cement:3 |
500 | core sand:6 gradedstone aggregate 40mmnominal size) base foundation, muffing including excavation and back refilling etc as required. |
501 | Supplying and erection of stay set complete with 16 mm dia,1.8mtr long stay rod, turn buckle anchor plate of size 200x200mmx6mm thimble , stay clamp, bow tightner,7/3.15dia GI stay wire etc in cement concreteM-10 (cement:3 core sand:6graded stonr aggregate 40mm nominal size foundation, including excavation and back refilling etc as required. |
502 | Erection of bracket on single pole. |
503 | Erection of allaluminium conductor of 7/3.4.00mdia and above including binding etc as required. |
504 | Supplying and erection of 75mm x 90mm shackle insulator with G.I. bolts, nuts and straps etc as required. |
505 | Supplying and erection of 11KV (5KV) polymer pin insulator complete with long steel head G.I. pin, nut washer etc as required |
506 | Supplying and erection of 11kv (45kn) polymer disc insulator for 11 kv/6.6kv overhead lines with galvanizes insulator fiting, ball and socket type, and complete with galvanized strain clamp bolts, nuts, washers etc as required. |
507 | Dismantling of pole/street light standard/strut embedded in cement concrete foundation etc as required. |
508 | Repairing and rewinding of ceiling fan including dismantling and fitting. |
509 | Repairing and rewinding of Exhaust fan including dismantling and fitting. |
510 | Rewinding of different type of motor for AC, Water cooler,and refrigerator with replacement of bush/bearing/shaft etc. |
511 | Shifting,installation,commissionin g of 1.5/2 tons different type of split ACs with new felt, fresh gas, new copper pipe, wire etc. as per requirement and direction of EIC. |
512 | Denting &paintingof water cooler/refrigerator. |
513 | Gas charging of AC, Refrigerator, Water Cooler,with required Gas(R-22,R-32,R-410,R-600,R- 134)with required pipe fittings etc as required and instruction of EIC.(Gas and pipe fittings to be provided by the contractor) |
514 | Providing and fixing of 45-50 mfd 440 v condenser 2Pin/3Pin + - 5% 50Hz 20c to 80c as per IS 2993 make philips, crompton,capital,jaivic or equivalent only. |
515 | Providing and fixing of Float valve for water cooler |
516 | Replacement of defective compressor by brand new 2tones rotarycompressor with accumulator for window/split ACs, suitable for 180-250VAC50Hz,10Amp. Maximum. Make -Kirlosker, Copland, Carrier, Godrej, Hitachi, Techumsha only.(Replaced defective compressors will be returned to the contractor by the deptt.) |
517 | Replacement of defective compressor by brand new 1.5 tones rotary compressor with accumulator for window/split ACs, suitable for 180 -250 VAC 50 Hz,10Amp. Maximum. Make -Kirlosker, Copland, Carrier, Godrej, Hitachi, Techumsha Blue star only. (Replaceddefective compressors will be returned to the contractor by the deptt.) |
518 | Fan Motor for AC |
519 | Fan Motor for refrigerator |
520 | Thermostat for refrigerator |
521 | Electronic Relay for refrigerator |
522 | Capillary for refrigerator |
523 | PCB for Indoor Unit |
524 | PCB for Outdoor Unit |
525 | Replacement of defective compressor by brand new1/6 or 1/8 tones rotary type compressorfor refrigerator(suitable for 65/90/165/210/300 litter) for cut uncut defective any type of compressor, suitable for 180-250 VAC,50 Hz supply,2 Amps max. Make- Kirlosker, Copland, Carrier, Godrej, Hitachi, only. (Replaced defective compressors will be returned to the contractor by the deptt.) |
526 | Replacement of defective compressor by brand new 1/3 tones compressor for water cooler for cut uncut defective any type of compressor, suitable for 180-250 VAC,50 Hz supply, 6 Amps max. Make- Kirlosker, Copland, Carrier, Godrej, Hitachi, only. (Replaced defective compressors will be returned to the contractor by the deptt.) |
527 | Capacitor6mf+-5%,440 V,AC, 50 Hz, 20C to 80 C as per IS 2993 make phillips,crompton, capital jaivic or equivalent only |
528 | Capacitor 36 mf +-5%, 440 V,AC, 50 Hz, 20C to 80 C as per IS2993, make- Philips, Crompton, Capital, Jaivic, or equivalent only. |
529 | Supply of Ac’s fan blade/water cooler fan blade suitable for different type of machine (withcomplete set) as per scopeofwork& terms & conditions. |
530 | Supply of filter with strainer, Anti choke & capillary for different type window/split Ac’s/water cooler etc. |
531 | SupplyofNon-ReturnValve for SPLIT AC |
532 | Supply of 66 N capillary tube for AC |
533 | Supplyofdifferenttypeof screw (1/4”,1/2”,1/3”) |
534 | Supply of thimble suitable for Acs connection. |
535 | Supply of steel wire brush(3 Nos), Nirma powder (5 Kg), Grease (500 gm), Plastic bucket (2 Nos.),emery paper (20 Nos) etc, requirement as per scope of work and terms and conditions. |
536 | Supply of Black synthetic enamal paint for painting of rusted part of Ac’s. |
537 | Supply of rubber for different type of Motor of Ac’s |
538 | Supply of tape with assembly with bib cock for different make of water cooler. |
539 | Supply of different type of nut bolt for fixing of compressor. |
540 | Supply of Defreezer of different type and size of refrigerator. |
541 | Supply of PC kitfor 1.5/2 tones Split Ac’s with remote, thermister and all accessories as per required. |
542 | Supply of Air Coolers in good conditions as per requirements with wheel mounted cooler stand on hire basis including installation, testing, commissioning at different locations including proper fixing of coolers for its true sealing with 6 mm thick plywood, operation and maintenance. Filling of water etc. for round the clock working of coolers and providing required manpower for regular water filling, running maintenance , spares, technicians complete as required for a period of 153 days(April 2024 to August 2024)andApril2025to August 2025 Distribution of coolers – A)–GM office complex, R/Store, BWS(X),BWS(E&M),CHP,VTC, Dispensary,Telephone exchange, Colony maintenance, 2x5 MVA S/S, Officers club, Workers club, Hi-Tech guest house, Kalyan Mandapam etc.-95 Nos. B) – Pit office Complex(Near Dumper parking and tapovan S/S) – 55 Nos C)- CISF Office and camps – 90 Nos Total = 95+55+90 = 240 Nos for 01 year |
543 | Total impact of GST for the purpose of CTC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail