Construction Of Sports Complex At Duttnagar ( Sh:- Civil Work Water Supply & S / I ), rampur-Himachal Pradesh

Construction Of Sports Complex At Duttnagar ( Sh:- Civil Work Water Supply & S / I ) - 1 Providing and fixing glazing in aluminium door ,window,ventilator shutters and partitions etc.withPVC/neoprens gasket etc.complete as per architural drawing and the directions of Engineer-in-Charge.(cost of aluminium snap beading shall be paid in basic item) Glazing with glass panes of 5.50mm thickness(weight not less then 13.75 kg/sqm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 2 Providing and fixing M.S. grills of required pattern in steel frame of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws : Plain grills including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 3 Providing and fixing brightfinished hard drawn hooks and eyes.150 mm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 4 15mm (fifteen millimeter) cementthick plaster in singlecoat on fair side of brickmasonry/stone masonry/concrete walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge 5 Providing and fixing 19mm (nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 6 Providingand fixing flat pressed3 layermediumdensityparticleboardor gradedparticleboard (Grade I) IS: 3087marked, inceilingwithnecessary nails etc. complete (frame work to be paid separately): 12 mm thick including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 7 Providing and fixing 12 mm thick pre-laminated board both side bwp phenol bonded exterior/interior grade : Panelled shutters with frames of first class deodar wood for doors including bright finished black enamelled iron butt hinges with necessary screws : 40mm thick frame including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 8 Providing and fixing 19mm (nineteeen millimeter) thick water proof commercial board in shelves /box for cup board with butt joints and fixing with nails and screws etc.complete including carriage of materials up to all leads and liftsincluding carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 9 ProvidingandfixingPTMTdoorcatcherof length72mmanddia.of42mm with suitable washers weighing not less than 33 gms including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 10 Providing and fixing bright finished brass handles with screws etc. complete:125 mm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 11 Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood curing complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 12 Applying priming coat with wood primer pink over new wood and wood based urfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter sand papering and knotting. Readymixed paint brushing including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 13 Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--with white paint/ other than white including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 14 Providing and fixing aluminium tower bolts,SImarked,anodised (anodiccoatingnotless thangradeAC10asper IS: 1868 ) transparent ordyed torequiredcolourorshade, with necessary screws etc. complete : including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 15 Providing and fixing C.P. Brass waste for wash basin or sink :- 32mm dia including carriage of material within all leads and lifts and as perHP.PWD. specification of 1990 volume-I and as per direction of Engineer-in-Charge. 16 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P.brass bracket sand guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 17 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 18 Providing and fixing uplasticised PVC connection pipe with brass unions : 30 CM length including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 19 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:89315 mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 20 Providing and fixing white vitreous chinaseat cover, acomplete as per direction Engineer-in-charge including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 21 Providing and fixing PTMT angle cock of approved quality including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 22 Providing and Fixing C.P. Pillarcock as per direction complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 23 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 24 Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 25 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 26 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 27 Providing and fixing G.I.Elbow complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 28 Providing and fixing G.I.Elbow complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 29 Providing and fixing G.I.Socket complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 30 Providing and fixing G.I.Socket complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 31 Providing and fixing G.I.teecomplete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 32 Providing and fixing G.I.teecomplete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 33 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 15 mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 34 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 35 Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. water with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. 610x510mm with bowl depth 200mm. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 36 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 37 Constructing manhole with R.C.C. top slab in 1:2:4 (1 cement: 2 sand 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 (1 cement : 4 sand :8 graded stone aggregate 40 mm nominal size), inside plastering 15 mm (fifteen millimeter) thick with cement mortar 1 : 3 ( 1 cement : 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing:- Inside size 800 mm x 800 mm and 500 mm (eight hundred into eight hundred into five hundred millimeter) deep including C.I. cover with frame. (Light duty single seal:Pattern 1) 455 mm x 610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 Kg):- With 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1 : 3 (1 cement :3 sand). including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 38 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 39 Providing and fixing charomium plated brass towel railwith C.P. brass brackets fixed to wooden cleats with C.P. brass screws 600x20mmincluding carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 40 Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces(two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 41 Proiding and laying precast terrazzo tiles hydraulic compressed 20 mm (twenty millimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (twenty five millimeter) average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)incliding rubbing and polishing complete with tiles of following shades:-SILVER GREY including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 42 Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--with white paint/ other than white including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 43 Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter :-- With white readymixed paint including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 44 Rubbing and polishing on flooring including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge. 45 Providing and laying of boulder apron laid in wire crates with 4mm (four millimetres)dia G.I. wire conforming to IS:280 and IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% (Tenper cent) extra for laps and joints laid with stone boulders weighing not less than 40 Kg (Forty millimetres) each as per drawing and technical specifications Clause 1301includinghauling of material through all modes of transporations with in all leads and lifts and as per the entire satisfaction and direction of the Engineer-in-Charge. .

INR 500 /-

INR 35000.0 /-

INR 17.52 Lakhs /-

Name of Work:- C/O Sports complex at Duttnagar (SH:- Civil work W/S & S/I)

Sl. No.	Item Description
1	Providing and fixing glazing in aluminium door ,window,ventilator shutters and partitions etc.withPVC/neoprens gasket etc.complete as per architural drawing and the directions of Engineer-in-Charge.(cost of aluminium snap beading shall be paid in basic item) Glazing with glass panes of 5.50mm thickness(weight not less then 13.75 kg/sqm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
2	Providing and fixing M.S. grills of required pattern in steel frame of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws : Plain grills including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
3	Providing and fixing brightfinished hard drawn hooks and eyes.150 mm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
4	15mm (fifteen millimeter) cementthick plaster in singlecoat on fair side of brickmasonry/stone masonry/concrete walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including carriage of material within all leads and lifts through all modes of transportation and as per HP.PWD. Specification of 1990 volume-I and as per direction of Engineer-in-Charge
5	Providing and fixing 19mm (nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
6	Providingand fixing flat pressed3 layermediumdensityparticleboardor gradedparticleboard (Grade I) IS: 3087marked, inceilingwithnecessary nails etc. complete (frame work to be paid separately): 12 mm thick including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
7	Providing and fixing 12 mm thick pre-laminated board both side bwp phenol bonded exterior/interior grade : Panelled shutters with frames of first class deodar wood for doors including bright finished black enamelled iron butt hinges with necessary screws : 40mm thick frame including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
8	Providing and fixing 19mm (nineteeen millimeter) thick water proof commercial board in shelves /box for cup board with butt joints and fixing with nails and screws etc.complete including carriage of materials up to all leads and liftsincluding carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
9	ProvidingandfixingPTMTdoorcatcherof length72mmanddia.of42mm with suitable washers weighing not less than 33 gms including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
10	Providing and fixing bright finished brass handles with screws etc. complete:125 mm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
11	Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood curing complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
12	Applying priming coat with wood primer pink over new wood and wood based urfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter sand papering and knotting. Readymixed paint brushing including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
13	Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--with white paint/ other than white including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
14	Providing and fixing aluminium tower bolts,SImarked,anodised (anodiccoatingnotless thangradeAC10asper IS: 1868 ) transparent ordyed torequiredcolourorshade, with necessary screws etc. complete : including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
15	Providing and fixing C.P. Brass waste for wash basin or sink :- 32mm dia including carriage of material within all leads and lifts and as perHP.PWD. specification of 1990 volume-I and as per direction of Engineer-in-Charge.
16	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P.brass bracket sand guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
17	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
18	Providing and fixing uplasticised PVC connection pipe with brass unions : 30 CM length including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
19	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:89315 mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
20	Providing and fixing white vitreous chinaseat cover, acomplete as per direction Engineer-in-charge including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
21	Providing and fixing PTMT angle cock of approved quality including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
22	Providing and Fixing C.P. Pillarcock as per direction complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
23	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
24	Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
25	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
26	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
27	Providing and fixing G.I.Elbow complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
28	Providing and fixing G.I.Elbow complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
29	Providing and fixing G.I.Socket complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
30	Providing and fixing G.I.Socket complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
31	Providing and fixing G.I.teecomplete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
32	Providing and fixing G.I.teecomplete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
33	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 15 mm nominal bore including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
34	Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
35	Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. water with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. 610x510mm with bowl depth 200mm. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
36	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
37	Constructing manhole with R.C.C. top slab in 1:2:4 (1 cement: 2 sand 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 (1 cement : 4 sand :8 graded stone aggregate 40 mm nominal size), inside plastering 15 mm (fifteen millimeter) thick with cement mortar 1 : 3 ( 1 cement : 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing:- Inside size 800 mm x 800 mm and 500 mm (eight hundred into eight hundred into five hundred millimeter) deep including C.I. cover with frame. (Light duty single seal:Pattern 1) 455 mm x 610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 Kg):- With 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1 : 3 (1 cement :3 sand). including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
38	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
39	Providing and fixing charomium plated brass towel railwith C.P. brass brackets fixed to wooden cleats with C.P. brass screws 600x20mmincluding carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
40	Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces(two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
41	Proiding and laying precast terrazzo tiles hydraulic compressed 20 mm (twenty millimeter) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (twenty five millimeter) average thickness of cement mortar 1:6 (1 cement :6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)incliding rubbing and polishing complete with tiles of following shades:-SILVER GREY including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
42	Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--with white paint/ other than white including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
43	Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter :-- With white readymixed paint including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
44	Rubbing and polishing on flooring including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
45	Providing and laying of boulder apron laid in wire crates with 4mm (four millimetres)dia G.I. wire conforming to IS:280 and IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% (Tenper cent) extra for laps and joints laid with stone boulders weighing not less than 40 Kg (Forty millimetres) each as per drawing and technical specifications Clause 1301includinghauling of material through all modes of transporations with in all leads and lifts and as per the entire satisfaction and direction of the Engineer-in-Charge. .