Tender For Microcontroller With Accessories For Augmentation Of Hardware For The Mcg System., kalpakkam-Tamil Nadu

Microcontroller With Accessories For Augmentation Of Hardware For The Mcg System. , Microcontroller With Compatible Usb Cable: Arduino Mega, 54 Digital Input/Output Pins And 16 Analog Pins, 4 Uarts And 16 Mhz Clock Speed. , Microcontroller With Compatible Usb Cable: Arduino Due, 54 Digital Input/Output Pins, 12 Analog Inputs, 4 Uarts (Hardware Serial Ports) And 84 Mhz Clock Speed. , Microcontroller With Compatible Usb Cable: Arduino Uno, 14 Digital Input/Output Pins, 6 Analog Inputs, 4 Uarts (Hardware Serial Ports) And 16 Mhz Clock Speed. , Digital Temperature Sensor Breakout - Tmp102: Resolution:+/- 0.02 Oc , Max30101 Photodetector Breakout: Measure Distance, Heart Rate, Particle Detection And Even The Blinking Of An Eye. This Utilizes A Red Led, A Green Led, And An Ir (Infrared) Led For Presence Sensing , Ad8232 Single Lead Heart Rate Monitor: Measures The Electrical Activity Of The Heart. The Operating Voltage Should Be Around 3.3V With 3.5Mm Jack For Biomedical Pad Connection. The Output Should Be In Analog. , Shield-Ekg-Emg-Pro: Ekg-Emg Cable With Snap Connector For Gel Ecg Electrodes, Length~ 80 Cm; Left, Right And Drl Channels. , Passive Infrared Sensor (Pir): It Should Able To Detect Motion In A Small/Local Area. It Should Be Based On The Ncs36000 Pir Controller. , Piezoelectric Crystal Vibration Sensor: Ultra-Low Frequency Piezoelectric Crystal Accelerometer With A Linear Response Between 0.3 And 800 Hz And Sensitivity Of 1 V/G , Triple Axis Analog Accelerometer Breakout (Adxl337 Chip Based): It Is A Small, Thin, Low Power, Complete 3-Axis Accelerometer With Signal Conditioned Analog Voltage Outputs That Has A Full-Scale Range Of ±200G For Measuring More Extreme Changes In Motion, Shock Or Vibration. Resolution +/- 3G , Infrared Proximity Sensor Long Range - Sharp Gp2y0a02yk0f: Range 20-150 Cm , Ultrasonic Range Finder - Hrxl-Maxsonar-Wr: Resolution Of 1Mm , Linear Magnetic Hall Sensor : Operating Voltage 3-5 V, Adjustable Sensitivity , 10K Thermistor With Negative Temperature Coefficient , Hc- Sr04 Ultrasonic Sensor :Operating Voltage: 5V Dc, Sensor Angle Not More Than 15 Degrees, Detection Distance Of 2Cm To 450 Cm , Discrete Semiconductor Kit: Consists Of Different Transistors, Diodes , Max32664 Pulse – Oximeter : High Sensitivity Optical Sensor To Measures Pulse Blood Oxygen Saturation (Spo2), Blood Pressure And Heart Rate , Pull Tension Yzc-516C Pressure Sensor S Type Load Cell , Laser Module- 650Nm, 5 Mw Red Laser Module , Third Hand: A Heavy Base, Two Alligator Clips, A Soldering Iron Holder, And A Good Magnifying Glass , Creality -Ender-3 S1 3D Printer: Equipped With High Precision Stepper Motor To Drive X,Y,Z Axis And Silicon Bed Mounts To Improve Stability, Printing Speed Of Up To 250 Mm/S , Rplidar A2m8 360 Degree Laser Scanner Kit - 12M Range: 2D, 360-Degree Scan Within A 12 Meters Range. Used For Mapping, Localization And Object Modelling , Jumper Wires Premium 12 Male-Male , Jumper Wires Premium 12 Male-Female , Jumper Wires Premium 12 Female-Female , Solder Bit-Tip Tinner And Cleaner , Breadboard - Self-Adhesive (White): Dimension (83.5 X 54.5 X 8.5Mm) , Dc Programmable Power Supply : Input Voltage: 220V Ac, Output Voltage: 0- 30V Dc , 0- 10A

Refer document

Refer document

Refer document

Item Details: Microcontroller with accessories for augmentation of hardware for the MCG system

Sl. No.	Item Description
1	Microcontroller with compatible USB cable: Arduino Mega, 54 digital input/output pins and 16 analog pins, 4 UARTs and 16 MHz clock speed.
2	Microcontroller with compatible USB cable: Arduino Due, 54 digital input/output pins, 12 analog inputs, 4 UARTs (hardware serial ports) and 84 MHz clock speed.
3	Microcontroller with compatible USB cable: Arduino UNO, 14 digital input/output pins, 6 analog inputs, 4 UARTs (hardware serial ports) and 16 MHz clock speed.
4	Digital Temperature Sensor Breakout - TMP102: Resolution:+/- 0.02 oC
5	MAX30101 Photodetector breakout: Measure distance, heart rate, particle detection and even the blinking of an eye. This utilizes a red LED, a green LED, and an IR (Infrared) LED for presence sensing
6	AD8232 Single lead heart Rate Monitor: Measures the electrical activity of the heart. The operating Voltage should be around 3.3V with 3.5mm Jack for Biomedical Pad Connection. The output should be in Analog.
7	SHIELD-EKG-EMG-PRO: EKG-EMG cable with snap connector for gel ECG electrodes, length~ 80 cm; Left, Right and DRL channels.
8	Passive Infrared sensor (PIR): It should able to detect motion in a small/local area. It should be based on the NCS36000 PIR controller.
9	Piezoelectric crystal Vibration sensor: ultra-low frequency piezoelectric crystal accelerometer with a linear response between 0.3 and 800 Hz and sensitivity of 1 V/g
10	Triple axis analog accelerometer breakout (ADXL337 chip based): It is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that has a full-scale range of ±200g for measuring more extreme changes in motion, shock or vibration. Resolution +/- 3g
11	Infrared Proximity Sensor Long Range - Sharp GP2Y0A02YK0F: Range 20-150 cm
12	Ultrasonic Range Finder - HRXL-MaxSonar-WR: Resolution of 1mm
13	Linear Magnetic Hall sensor : operating voltage 3-5 V, adjustable sensitivity
14	10K thermistor with negative temperature coefficient
15	HC- SR04 ultrasonic sensor :Operating voltage: 5V DC, Sensor angle not more than 15 degrees, Detection distance of 2cm to 450 cm
16	Discrete Semiconductor Kit: Consists of different transistors, diodes
17	MAX32664 Pulse – Oximeter : high sensitivity optical sensor to measures Pulse Blood Oxygen Saturation (SpO2), Blood Pressure and heart rate
18	Pull Tension YZC-516C Pressure Sensor S Type Load Cell
19	Laser Module- 650nm, 5 mW red Laser Module
20	Third Hand: A heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass
21	Creality -Ender-3 S1 3D Printer: equipped with high precision stepper motor to drive x,y,z axis and silicon bed mounts to improve stability, printing speed of up to 250 mm/s
22	RPLiDAR A2M8 360 Degree Laser Scanner Kit - 12M Range: 2D, 360-degree scan within a 12 meters range. Used for mapping, localization and object modelling
23	Jumper Wires Premium 12" Male-Male
24	Jumper Wires Premium 12" Male-Female
25	Jumper Wires Premium 12" female-female
26	Solder Bit-Tip Tinner and Cleaner
27	Breadboard - Self-Adhesive (White): Dimension (83.5 x 54.5 x 8.5mm)
28	DC programmable power supply : Input voltage: 220V AC, Output voltage: 0- 30V DC , 0- 10A