Tender For Improvement To Shendla Sabra Khanapur Ch From 6/500 To 7/200 Ta Mehkar Distt.Buldana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Jan 2024
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khanapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Shendla Sabra Khanapur Ch From 6/500 To 7/200 Ta Mehkar Distt.Buldana
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front sideandgrey stoveenamel onback sideand border/ messages/ symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross bracedM.S.anglesofsize35mmx35mmx3mmdulypaintedincludingTwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 2 | Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 mm manually including loading of dismantled material to transport vehicle at site excluding lead charges |
| 3 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 4 | Supplying trap/granite/quartzite/gneissstone metal of required size by bringing the boulders / Rubble at the road side breaking them to requiredgradationincludingconveyingtheboulders/Rubbleand stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements)a)40 mm Metal, By breaking Boulders (Hand broken). |
| 5 | Supplying soft murum at the road site, including conveying and stacking complete. |
| 6 | Spreading80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . |
| 7 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. |
| 8 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller onB.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are consideredto arrive at rates) |
| 9 | Providing and constructing 50 mm. thick ModifiedPenetration Macadam (MPM)road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying thebitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 10 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 11 | Providing and laying of Type - B premix seal coat with HMP of appropratecrushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing road surface including mixing in suitable Batch Mixplant and rolling by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 12 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 13 | Spreading hard murum/ soft murrum/ gravel or kankar for sidewidth complete |
| 14 | Providing and fixing metre stones as per I.R.C. standard including fixing in standard size block including curing, painting lettering etc. complete. |
| 15 | Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. |
| 16 | Royalty Metal H BMurum |
| 17 | Water absorption , Specific Gravity , Impact Value , Crushing Value |
| 18 | Sieve anlysis(Gradation), |
| 19 | Penetration,Soft.Point,Flas,Fire,Specific Gravity, |
| 20 | Extraction |
| 21 | Sieve anlysis(Gradation), |
| 22 | Liquid/Plastic/PI |
AI Tender Summary
Tender Timeline
Jan 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender