Military Engineer Services-MES has published Tender For Spl Repair To Chain Link Fencing In Dm Line And Spl Repair To Area Drainage At Dm Line And Provn Of Two (02) Genr Shed Near Bldg No Mes (Kt) P 3 (Office Complex) At 119 Inf Bn (Ta) Assam And Provn Of Sewage Nala In Front Of Mes (Kt) P 2A. Submission Date for this Tender is 06-02-2024. Drainage Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-01-2024 |
| 2 | 23-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-01-2024 |
| 3 | 27-Jan-2024 | DATE CORRIGENDUM | Date | 06-02-2024 |
| Sl. No. | Item Description |
| 1 | B/RPORTION M & L for Surface dressing n exc 15 cm deep for Soft/loose soil complete all as specified and as directed. |
| 2 | Removing excavated soils to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed. |
| 3 | Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed. |
| 4 | M&L for rendering 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed. |
| 5 | Excavation in post holes each n.exc. 0.5 cum in soft/loose soil getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25cm, watering & removing surplus soil to a distance not exc 50mtr and making good disturbed surface complete all as sepcified and as directed. |
| 6 | M&L for PCC (1:3:6), type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as speciified and as directed. |
| 7 | S&F mild steel angle iron or other sections for post and struts in fencing, flat iron fillets (for securing wire mesh etc) to fencing post, cut to shape, drilled and countersunk for screw, including cutting tops to shape as directed, drilling holes, notchin for wire, embedding in concrete and screwing etc, conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 8 | Supply only chain link mild steel galvanised fencing of mesh size 100mm x 100mm (design of mesh shall be approved by GE) made of GI wire not less than 2mm dia including line wires, to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed. |
| 9 | Fixing only chain link mild steel galvanised fencing of any mesh and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed. |
| 10 | S&F 10mm dia TMT bars of any length as in stiffener to chain link fencing fixed to fencing post complete all as specified and as directed. |
| 11 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long diameter of neck 11 to 15mm complete all as specified and as directed. |
| 12 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 13 | S&F Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed (each line wire to be measured) |
| 14 | S&F rolled mild steel in Roof trusses (framed),trussed, purlins,crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee,angle,channel or flat section) including distance pieces, cleats etc. conforming Fe410 Grade E250 quality A including all necessary drilling, bolting or riveting, weldingcomplete all as specified and as directed. |
| 15 | M&L for mild steel works as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, weldingetc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 16 | M&L rolled mild steel as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe complete all as specified and as directed. |
| 17 | S & F Pre-painted galvalume alumunium Zinc coasting GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc. complete all as specified and as directed. |
| 18 | S & F Pre-painted galvalume alumunium Zinc coasting GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc. complete all as specified and as directed. |
| 19 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed. |
| 20 | M & L for hardcore of broken brick gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 21 | M & L for 100mm thick Plain cement concrete type D-2 1:4:8 using 40mm graded Crushed stone aggregate as in sub base to floor finished rough to receive finishes complete all as specified and as directed by the Engineer-in-Charge |
| 22 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 23 | M&L cement concrete 1:3:6 type C2(40 mm graded aggregate )as in surface channel and drains complete all as specified and as directed. |
| 24 | M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and as directed. |
| 25 | M&L for rendering15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 26 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed. |
| 27 | M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1:6) including necessary form work complete all as specified and directed. |
| 28 | M&L for Mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and as directed. |
| 29 | M&L for PCC (1:4:8) type D-2using 40mm graded machine crushed stone aggregate as in foundation complete all as specified and as directed. |
| 30 | M&L for RCC as in foundations, including raft, footings , plinth beams, bases for columns etc type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specified and as directed. |
| 31 | M&L for RCC as in columns,pillars ,piers postsandtype nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specified and as directed. |
| 32 | M&L formwork to sides of plinth beams , foundations and other similar works , Rough finished surface of concrete (Flat)complete all as specified and as directed. |
| 33 | M&L formwork to sides of pillars, posts,struts,piers , coloumns and stanchions, Rough finished surface of concrete (Square, rectangular or polygonal)complete all as specified and directed |
| 34 | M&L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed. |
| 35 | M & L 100mm thick PCC 1:3:6 type C2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 36 | M & L 40 mm thick PCC 1:2:4 type B1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed. |
| 37 | M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L for non skid ceremic white tiles7 to 8mm thkarea of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bedin CM 1:6 complete all as specified and as directed. |
| 39 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 40 | M&L for 20mm thick granite slab ( as in table top rubbed and polished) as in counter basin fixed over and including scrud bed 15mm thick in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all complete all as specified and as directed. |
| 41 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed. |
| 42 | M&L for providing precast cement concrete set in CM (1:4) type B1 1:2:4 (20 mm graded aggregate)in landings,cover slabs , shelves and similar articles with plain facesincl formwork complete all as specified and as directed. |
| 43 | Supply only Integral waterproofing compound complete all as specified and as directed. |
| 44 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 45 | M&L mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups withand including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 46 | S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed. |
| 47 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 48 | M&L 4mm thick E Board 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as specified and as directed as per manufacturer instruction. |
| 49 | S&F anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 50 | S&Fanodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed. |
| 51 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 52 | S&F mild steel framed work such as grills/ guard bars gratings,etc,with ends of bar shouldered/ inserted into wooden frames to steelwindow complete all as specified and as directed. |
| 53 | M&L for preparation of new steel surfaces nexc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 54 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and as directed. |
| 55 | S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial type on both faces complete all as specified and as directed. |
| 56 | M&L for preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamelpaint over a coat of pink primer complete all as specified and as directed. |
| 57 | S&F aluminium anodised 150 mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 58 | S&F aluminium handles, cast type, anodised, fabricated type of size 150 mm complete all as specified and as directed. |
| 59 | S&F butt hinges 100 mm medium weight, mild steel cold rolled and fixed complete all as specified and as directed. |
| 60 | S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Syphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 61 | S&F vitreous China wash hand basin of size 550x400mm oval shape complete all as specified and as directed. |
| 62 | S&F fancy type CP single lever basin mixer without popup waste complete all as specified and as directed. |
| 63 | S&F Brass CP 2-in-1 Bibcock with flange complete all as specified and as directed. |
| 64 | S&F in repairs Soap dish holder complete all as specified and as directed. |
| 65 | S&F Towel ring square shape stainless steel complete all as specified and as directed. |
| 66 | S&F corner glass shelf with bracket complete all as specified and as directed. |
| 67 | S&F 15 mm bore CP health Faucet cock with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 68 | S&F Toilet roll holder with stainless steel complete all as specified and as directed |
| 69 | S&F Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing, union and cap and fixed in repairs complete all as specified and as directed. |
| 70 | S&F 15 mm Brass CP angular stop cock fancy type with Capstan heads fixed complete all as specified and as directed |
| 71 | S&F of 600mm x 450mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified and as directed. |
| 72 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed |
| 73 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed. |
| 74 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 75 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 76 | S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed |
| 77 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 78 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 79 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 80 | All as per Item No. 80 above, but for 20mm dia (Bore) complete all as specified and as directed. |
| 81 | S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth on stone concrete block or slab walls complete all as specified and as directed. |
| 82 | Supply hoisting and fixingrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valvehigh pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank all complete all as specified and as directed. |
| 83 | S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 84 | M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed. |
| 85 | M&L for preparation of new wall surafces and applying two finishing coat of acrylic emulsion paint , anti fungal resistant , dirt resistant exterior paint of required shade including primer coat and 1mm thick exterior putty on new surface complete all as specified and as directed. |
| 86 | Dismantling plain or corrugated steel sheeting , any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed. |
| 87 | Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and directed |
| 88 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 89 | Taking down chowkats or frames n. exc 1.50 Sqmeach with shutters (without taking off shutter from the frames) complete all as specified and as directed. |
| 90 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed. |
| 91 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 92 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 93 | M&L for RCC for foundations, including raftfs, footings , plinth beams, bases for columns etc type B1 (1:2:4) (20 mm graded aggrgate) complete all as specified and as directed. |
| 94 | M&L for Rcc Beams, cantilevers, bressummers, lintels over 1.5m span type B1 (1:2:4) (20 mm graded aggrgate) complete all as specified and as directed. |
| 95 | M&L for preparation of new wall surafces and applying two finishing coat of acrylic emulsion paint , anti fungal resistant , dirt resistant exterior paint of required shade including primer coatcomplete all as specified and as directed. |
| 96 | S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) acomplete all as specified and as directed. |
| 97 | S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 98 | S&F extruded aluminium alloy handles, fabricated type, anodisedof size 150 mm complete all as specified and as directed. |
| 99 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 100 | S&F powder coated(powder coating min 50 micron)anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed. |
| 101 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 102 | M & L 75mm thick PCC 1:4:8 type D2 as in subfloors/Plinth protectionfinished even and rough without using extra cement complete all as specified and as directed. |
| 103 | M&L for vitrified tiles lightshade 10mm (square /rectangular) polished, area of each tiles exc 0.42 sqm but nexc 1 sqm, in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed. |
| 104 | All as per Item No. 104 above, but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:3 complete all as specified and as directed. |
| 105 | E/M PORTION Material andlabour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly completefor one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and as directed. |
| 106 | All as per Item No. 106 above, but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 107 | All as per Item No. 107 above, but with 2.5 Sqmm cable for socket outletpoint 5 Amp on Independent board complete all as specified and as directed. |
| 108 | Supply and fixing modular switch 1 way 6A,1 module 230/250 volt , AC,ISI Marked, complete all as specified and as directed. |
| 109 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, complete all as specified and as directed. |
| 110 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, complete all as specified and as directed. |
| 111 | Supply and fixing modular switch 16A1 module 230/250 Volts,50 Hz , AC supply, ISI Marked, complete all as specified and as directed. |
| 112 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed. |
| 113 | Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket, clamps etc complete all as specified and as directed |
| 114 | Supply and fixin repair MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down existing unserviceable one complete all as specified and as directed. |
| 115 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity "C" seriescomplete all as specified and as directed including taking down existing unserviceable one complete all as specified and as directed. |
| 116 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB"s complete all as specified and as directed. |
| 117 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed. Make:Cona , Plaza, Anchor . |
| 118 | Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground withstranded aluminumconductor16 sqmm 2 Core 1100 Volts grade laid in trenches, or passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and as directed. |
| 119 | Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any size in soft/loose soil and getting out complete all as specified and as directed |
| 120 | Returning and filling including spreadking levelling watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and as directed |
| 121 | Removing excavated material at a distance n exc 50m and deposited where directed at a level not exc 1.5 above the starting point for soft/lose soil complete all as specified and as directed |
| 122 | M & L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and as directed. |
| 123 | Supply and laying of sub class B bricks locally available as in protection of UG cable complete all as specified and as directed. |
| 124 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceilingand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch complete all as specified and as directed. |
| 125 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 126 | S & F Exhaust fan 230 volts , 250mm,plastic body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed. Make Bajaj/Havell"s/CG. |
| 127 | Supply and fixin repair MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. Make: Havells / Schnieder/GE/C&S. |
| 128 | Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground withstranded aluminumconductor 6 sqmm 2 Core 1100 Volts grade laid trenches, or passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and as directed. |
| 129 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and as directed. |
| 130 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch complete all as specified and as directed. Note :- Switch, socket and fan regulators to be measured and paid for separately . |
| 131 | All as per Item No. 131 above, here in before but for socket outlet point 5 Amp on same board complete all as specified and as directed. |
| 132 | All as per Item No. 131 above, here in before but for socket outletpoint 5 Amp on Independent board complete all as specified and as directed. |
| 133 | All as per Item No. 131 above, but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and as directed. |
| 134 | Supply and fix switch piano (ISI marked) Single pole 240 volts,5Amps complete all as specified and as directed. |
| 135 | Supply and fix socket(ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. |
| 136 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. |
| 137 | Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wallwith 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed. |
| 138 | Supply and fixing LED security Buildinglight LED 25 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from source to connector of light and bracket of suitable size with clamps, nuts, bolts and washers complete all as specified and as directed. |
| 139 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and as directed. |
| 140 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star ratedvertical type includng fixing of bolts , nuts grouted into the wall, and necessary cement work , making good of disturbed surface of wall, giving electric and water connection and testing after installation complete all as specified and as directed. |
| 141 | S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia complete all as specified and as directed. |
| 142 | Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and jointing including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe complete all as specified and as directed. |
| 143 | Supply and Fix of 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. |
| 144 | M & L Sub main wiring with two run of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing cappingISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as specified and as directed..Note: (i) Two runs of 6 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. |
| 145 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as specified and as directed.as shown in Electrical Plate No 3 of SSR part -I. |
| 146 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as specified and as directed.as shown in Electrical Plate No 3 of SSR part -I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
