Tamil Nadu Civil Supplies Corporation Limited-TNCSC has published Tender For Modernization Of Existing Ads Such As Providing Racks,Acp Panel And Interior Works In Tncsc Godown Campus At Anna Nagar In Chennai City.. Submission Date for this Tender is 18-01-2024. Interior Work Tenders in Chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Dismantling Brick/Stone masonry in Cement mortar under 3m height for any thickness of wall and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers. |
| 3 | DismantlingPlain Cement concrete and clearing away as directed by the departmental officers. |
| 4 | Dismantling AC Sheet Roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers. |
| 5 | Dismantling floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles /cuddapah slab and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers. |
| 6 | Supplying and filling in foundation and basement with clean M sand in layers ofnot exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed. |
| 7 | CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed. |
| 8 | BRICK WORKin cement mortor 1:5 (one cement, five sand) using best quality second class chamber burnt bricksofsize 9"x4 3/8"x2 3/4"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. In foundation and basement |
| 9 | In ground floor upto 4.50M height above basement. |
| 10 | Manufacturing supplying and fixing of Steel Door (Double Leaves) with the following specification MS angels of size 40 x 40 x 6mm are used for the outer frames and MS angles of size 35 x 35 x 5mm for the shutter frames stiffeners with 32 x 6mm MS flat is provided at required intervals in the shutter frame. 18 gauge CR sheet laid as panel in the shutter and welded intact. MS flat 18 x 5mm is welded over the 32 x 6mm MS flat sand witching the CR sheet in between additional stiffeners with 18 x 5mm MS flat is provided diagonally at the rear side of the shutter, 3 Nos. of hinges in case of single leaf and 6 Nos. of hinges in double leaves shutter to be provided. 6 Nos. of hold fasts 300mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2 Nos., one at the top and the other at the bottom are provided.250 x 16mm size of two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking. |
| 11 | Fabricating, supplying and fixing in position of SOLID PVC DOORS with frames of sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multi chamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configuration of an “A” section for shutter frames and multi-chamber hollow plastic section of 200 mm 200 mm1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dismantling the masonry, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers |
| 12 | Plain Cement Concrete 1:2:4(one cement,two sand and four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessaryincluding curing etc., complete complying with standard specification and as directed. |
| 13 | PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed |
| 14 | Pavingthe flooring with design colour Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., completecomplying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works). |
| 15 | Dadooing the walls with glazedtiles of size 150mmx150mmx6mm of approved quality over a base layer of C.M.1:2, 10mm and pointing the joints with white cement mixed with colouring pigment at the rate of 0.40 kg/sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works). |
| 16 | Paving the flooringwith double charged vertifiedTiles of size 600 x 600 x 8mm of approvedcolour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 17 | Paving the floor with fine polished cuddapah stone slab of 38 / 40mm thick laid over Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five Sand and Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification |
| 18 | Distempering the old wall and ceiling with two coat ofOil bound distember of approved quality including preparation ofsurface, the rate includes cost of brushes, scaffolding arrangements, neat finishes, etc., complete complying with standard specification and as directed by the departmental |
| 19 | Painting the walls with two coats of ready mixed exterior emulsion paintof first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.(Exterior emulsion paint should be got approved by the Executive Engineer before use on work.). |
| 20 | Painting the walls with two coats of ready mixed interioremulsion paintof first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.(Interior emulsion paint should be got approved by the Executive Engineer before use on work.). |
| 21 | Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). |
| 22 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers. |
| 23 | Supplying and fixing in positionthe following PVC specials ofheavy duty of approved quality and good variety including cost of fixing chargesnecessary cutting and threading of PVC.Pipes, jointing the PVC Specials etc complete. PVC elbow 110mm dia. |
| 24 | PVC Tee 110mm dia |
| 25 | Supplying, and fixing the following size of PVC pipes of 25mm dia (Having working pressure 10kg/ of approved quality and variety conforming to pressure IS 4985. The rate is inclusive ofcost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixingthe PVCpipe as directed by the departmental officersetc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. |
| 26 | Supplying and fixing in positionthe following PVC specials ofheavy duty of approved quality and good varietyexcluding fixing charges but including necessary cutting and threading of PVC .Pipes, jointing the PVC Specials etc complete. PVC coupler 25mm dia |
| 27 | PVC bend25mm dia |
| 28 | PVC Tee 25mm dia |
| 29 | PVCElbow 25mm dia |
| 30 | Supplying and fixing in position 15mm dia brass CP screw down tap(heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers. |
| 31 | Supplying and fixing Galvalume sheet roofing with 0.47 mm thick of fully corrugated of approved colour and quality and steel tubuler box section of 100x50x3mm 1 metre intervals by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed. |
| 32 | Providing and fixing of aluminium composite panel (ACP) 4 sided having 50x25x1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights.The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirmingT is -63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt, nuts etc., The main frame of extruded section shall be 22843 & 22739 (H9) gradeconforming to BS 4174 (or) IS 8147.Rate shall included 4mm thickACP sheet (0.25 +3.50 +0.25) alstrong or equivalent fixing with spacer type and the ACP sheet bounded with special typestructural sealant of dow coming 789 or equivalent in dust free conditions the gaps between ACP sheet to be filled with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification and as directed by the departmental officers. |
| 33 | Supplying and fixing M.S.Foldable gate, entrance gate, safety grills, special windows and ventilators etc., as directed by the departmental; officers inclusive of cost of MS grill including one of red oxide primer and fixing in position etc., complete. |
| 34 | Supplying and laying of Interlocking paver block stone of 60mm thick over a base layer of sand filling of approved quality including cost of materials laying and labour charges of packing etc., complete complying with standard specification and as directed by the departmental officers. |
| 35 | Paving the floor with best approved quality fine polished Granite Stone slabs of size 1200 x 600 of 18/20mm thick of synthetic grey, paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (one cement and three sand) fixing the slaps with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete as per standard specification. |
| 36 | Paintingold iron work with two coats of synthetic enamel paint ofapproved quality and colour.The rate is inclusive of cost of all materials, labour charges and scaffolding charges etc. complete complying with standard specifications.(The paint should be got approved by Engineer in charge work before use on works) |
| 37 | “L” type Rack Having size 6’H x 4’L with 6 plates (18”-01, 15”-02, 12”-03 nos) (Main Rack) Front Aluminium Stopper and End Stopper Main Rack |
| 38 | 4’L Add on Rack |
| 39 | 3 ½’L Add on Rack |
| 40 | Centre Rack Having Size 5’H x 4’L with each side 5 Plates Double Back Sheet (18”-01, 15”-02, 12”-02 nos) (Main Rack) Front Aluminium Stopper and End Stopper Main Rack |
| 41 | 4’L Add on Rack |
| 42 | 3’L Add on Rack |
| 43 | Centre Rack Having Size 5’H x 3 1/2’L with 5 plates Normal backSheet (18”-01, 15”-02, 12”-02 nos) Add on rack. |
| 44 | “G” Type Rack having size 5’H x 3’L with 5 Plates ( 12”-05 Nos) front Aluminium stopper and end stopper. |
| 45 | “G” Type Hook Rack having size 5’H x 3’L with 5 Plates ( 12”-01 No)and 20 Hooks.. |
| 46 | Metal Cash Counter having size 5’L x 3 ½ ‘W x 3’H ( Delivery +Billing Counter) |
| 47 | Toughened clear glass 12mm thick with door including all materials, labour etc., complete |
| 48 | Supplying and exposing of Printing work for Branding. Approved art work printed on direct 5mm foam board and mounting using mirror |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
