}

Tender For Renovation/Upgradation Of Jawan Barrack Of Bop Mahadev(02 Nos) And Bop Kanai (Total 03 Nos) Of 170 Bn Bsf Under Shq Bsf Shillong (Sh: Electrical Work), West Garo Hills-Meghalaya

Border Security Force-BSF has published Tender For Renovation/Upgradation Of Jawan Barrack Of Bop Mahadev(02 Nos) And Bop Kanai (Total 03 Nos) Of 170 Bn Bsf Under Shq Bsf Shillong (Sh: Electrical Work). Submission Date for this Tender is 08-01-2024. Electrical Maintenance Tenders in West Garo Hills Meghalaya. Bidders can get complete Tender details and download the document.




Tender Notice

41407032
Tender For Renovation/Upgradation Of Jawan Barrack Of Bop Mahadev(02 Nos) And Bop Kanai (Total 03 Nos) Of 170 Bn Bsf Under Shq Bsf Shillong (Sh: Electrical Work)
Open Tender
Indian
Meghalaya
West Garo Hills
08-01-2024

Tender Details

Renovation Up Gradation Of Jawan Barrack Of Bop Mahadev 02 Nos And Bop Kanai Total 03 Nos Of Renovation Up Gradation Of Jawan Barrack Of Bop Mahadev 02 Nos And Bop Kanai Total 03 Nos Of 170 Bn Now 01 Bn Bsf Under Shq Bsf Shillong Sh Electrical Work

Key Value

Document Fees
Refer document
EMD
INR 7653.0 /-
Tender Value
INR 3.82 Lakhs /-

BOQ Items

Name of Work: Renovation/Upgradation of Jawan barrack of BOP Mahadev(02 Nos) and BOP Kanai (Total 03 Nos) of 170 Bn BSF under SHQ BSF Shillong (SH: Electrical work)
Sl. No. Item Description
1Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. (Group-B)
2Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm
3Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
4Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
5Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
6Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door
7Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Single pole)
8Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (63 Amps)
9Supplying, Installation, testing & Commissioning of4"long 18/20 watt LED batten (make Havells-Lumeline- LUMILINEBS18W LED865SPCWH)/ similar model of Crompton/ Philips / Havells/ SYSKA /Wipro) directly on ceilling / wall including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, earthing etc. as required.
10Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor(Make: Havells-Efficiencia Neo (BLDC 26 W) or equivalent model of Usha/CG/etc) class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
11Supplying, Installation, testing & Commissioning of45 Watt rating LED street light luminaire, out door type with pressure die cast aluminium housing with heat resistant glass, IP66 protection, suitable for single phase, 50 Hz AC (MAKE Havells-ENDURASUNDOWNSL45WLED765PASYBOPC), including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, earthing, Supplying and fixing of 32 mm dia X 0.50 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting directly on wall, bending the pipe to the required shape, 2 nos suitable size flat iron clamps with nuts, bolts and washer etc. as required.
12Supplying, Installation, testing & commissioning of LED square / round surface mounted 10 Watt LED downlighterwith PDC aluminum housing and PMMA diffuser Luminaire complete with electronic driver directly on ceiling including connection with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, earthing etc. as required (Make :Havells- Edge pro neo round, model: EDGEPRONEORDDLR10WLED865S) or with similar model of Orient/Philips / Crompton / Osram/ Wipro).
13Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
14Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
15Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting / sweating and soldering etc as required.
16Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
17Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
18Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
19Supplying and Laying of aluminium conductor, XLPE Insulated, PVC Innersheathed, armoured power cable of 1.1 KV grade of 2×25 sq. mmsize direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.(Make Havells/Polycab/Universal/CCI/ Plaza/RRKable)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail