|
| 1 | Construction oftraverse wall of magnesium storage In-Magazine cubicle no 6 in tracer loading (Danger Building area) at PRF-TCR/LA section inside factory at Ordnance Factory Varangaon. |
| 2 | Excavating over areas,Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. and getting out etc complete as per SSR 2020. |
| 3 | M & L broken stone hardcore of gauge n exc 63 mm deposited, spread & levelled in layers n exc 15 cm thick, watered and rammed to a true surface etc complete as per SSR 2020. |
| 4 | Soling or sub base with 200mm & above size broken boulders or quarried stone, interstices filled, surface formed and rolled (Except stone) and consolidated to required gradient and camber etc complete as per SSR 2020. |
| 5 | Plain Cement Concrete in foundation , filling and mass concrete type C2 1:3:6 (40 mm Graded aggregate) etc complete as per SSR. |
| 6 | M & L Deformed or twisted mild steel bars 10mm dia & over cut to length bend to shape reqiured including cranking bending spirally etc complete as per SSR 2020. |
| 7 | Ditto, but Deformed or twisted mild steel bars 6mm to 8 mm dia , quality conforming to etc complete as per SSR 2020. |
| 8 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete as per SSR 2020. |
| 9 | Demolition of RR or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete as per SSR 2020. |
| 10 | Form work to sides of walls. Retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or batter etc complete as per SSR 2020. |
| 11 | Reinforced cement concrete type B0 1:2:4 (12.5 mm graded) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete as per SSR 2020. |
| 12 | R C C type B2 1:2:4 ( 40 mm aggr)in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps andbases) etc complete as per SSR 2020 |
| 13 | M & L reinforced cement concrete in floors & pavings 100 mm thick type B2 1:2:4 (40 mm Graded aggregate) finishing even smooth with spike rolling etc complete as per SSR 2020 |
| 14 | Rendering 15 mm thick in 1:4 cement mortar on fair faces of brick work etc complete as per SSR2020. |
| 15 | M&L100 mm salt glazed stoneware drain pipes laid in trenches & jointed as specified etc complete as per SSR 2020. |
| 16 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., exc. 1.5 m high from base upto a height of 5.5 meter etc complete as per SSR 2020 |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas as directed by Engineer-incharge in any type of soil from estate area and shifting the excavated earth material/ moorum to site at a distence n exc 5 Km, alongwith spread, rolled and consolidated to gradient and camber required and spread thickness 75mm, as per SSR 2020. |
| 18 | Preparing surfaces plastered or unplastered on walls including brooming down, scrapping down & applying one coat primer with two coats of cement paint, etc complete as per SSR 2020. |
| 19 | Dismantalling of concret in ground floors and pavings n exc 15 cm thickness etc and removing excavated material exc. 1.5Km but n exc. 5 Km and depositing where directed etc complete as per SSR 2020. |
