Tender For Provision Of Fire Proofing Panels And False Ceiling Of Afnet Eqpt Room At Af Stn Thoise Under Ge (Af) Thoise
Tender Value
22.20 Lakhs
Estimated cost
Bid Submission
23 Jan 2024
0 days left
EMD
44400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thoise → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Fire Proofing Panels And False Ceiling Of Afnet Eqpt Room At Af Stn Thoise Under Ge ( Af ) Thoise
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jan-2024 | corrigendum No.01 | Other | 16-Jan-2024 |
| 2 | 16-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-Jan-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including any thickness complete all as specified. |
| 2 | Taking down chowkat with shutter exc. 1.5sqmbut n.exc 4 sqm each complete all as specified and directed . |
| 3 | S&F for powder coated anodised aluminium frame for windows including three track (three shutters : one gauge and two glazed) sliding type aluminium sections weighing not less than 0.55 kg per mtr including necessary jointing cleats, rubber packing anodised aluminium snap gridding, screws, handle of size not less than 100mm, locking arrangement etc complete and 5.5mm thick tinted glass panels aluminium mosquito proof gauge and aluminium guard bar mesh size not less than 75mm x 75mm and making good disturbed surface of wall complete all as specified and directed by Engr in Charge. |
| 4 | S&F for powder coated anodised aluminium frame for doors including shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges anodised aluminium snap beading screws, locking arrangementandincluding 5.5mm thick tinted glass panels etc complete all as specified and directed by Engr-in-Charge |
| 5 | Providing and fixing tiled false ceiling of size (600x600)mm in true horizontal level suspended oninter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main\"T\" runner of size 24x32x0.3x3600mm, cross \"T\" of size 24x25x0.3x1200mm, secondary cross \"T\"of size 24x25x0.3x600mm and PPGI wall angle of size 24x24x0.4x3000mm. Bottom exposedcapping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle24x24x0.4x3000mm {Material-GI(IS513),YS-280Mpa,Galvanised 90GSM(IS277),Finish-painted25 micron top side,10 micron backside} is fixed along the perimeter of the ceiling to Walls,partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at600 mm c/c. Gyproc® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinccoating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mmgrid. Main-T runners 24x32x0.3x3600mm {GI (IS513)YS- 280Mpa, Finish- Galvanised 120GSM(IS277) } are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterflylevel clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T andnot more than 150mm from spliced joints. The last hanger at the end of each main runner shouldnot be greater than 600mm from the adjacent wall. 24x25x0.3x1200mm cross T {GI(IS513)YS280Mpa,Finish-Galvanised 120GSM(IS277) } is interlocked between the main T at 600mmcenter to center to form a grid of 1200x600 mm and then secondary cross “T\" 24x25x0.3x600mm{GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277)} is then interlocked at middle of the1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than600mm are to be supported independently. Finally T-24, Reveal edge PPGI perforated metal tilesof size (595x595)mm, having Front side painting 23-26 micron & back side 8-10 micron, 9.5mmdrop and overall thickness 0.5mm, made of pre-painted galvanized iron (90GSM galvanizing,),NRC=0.5 with an open area of >15% with straight perforations of 2.3mm diameter @ pitch of 5mmin (557x557)mm area & backed by black coloured acoustic fleece 50-60 micron, is placed in the grid Make- Gyproc Saint Gobain/Armstrong. |
| 6 | Provide and fixing Saint Gobain Gyproc G.I Clip-in tiles with square edges with G.I sheet (600 mm x 1200 mm) is manufactured out of 0.50 mm Galvanized steel of 120 gsm/sq.mtr sheet having plain color white powder coating with 60 microns polyester paint on front side. These tiles shall have square edges. Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring Clip-in profile, yet allow for demounting of individual tiles. The rigid fixing system consists of rows of 0.5 mm galvanized steel Clip-in profiles of size 24 mm X 34 mm of 0.5 mm thick and installed at 600 mm c/c spacing to support the tiles, clip-in profiles are fixed with the walls from hold on clamps. Edge profile are of size 24 mm X 24 mm X 0.35 mm thick with matching the color with tiles. These tiles are available in perforation of dia 1.8 mm (20%) with black acoustic fleece. Tiles are in plain white color or as per requirement by Engineer In Charge Make- Gyproc Saint Gobain/Armstrong. |
| 7 | Taking down carefully existing unserviceablealuminum/copper point wiring of any description & in anyposition with and including existing conduit fixed on surface with and including existing junction boxes in between the point wiring complete, including making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed by Engr-in-Charge.NOTE: Taking down / replacement of existing fittings like switches/sockets / switch fuses /tube light fittings etc. if any, shall be measured and paid for separately under appropriate item of Schedule `A\" |
| 8 | Material and labour for flame proof point wiring for one light point or one socket point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade in and including stove enameled black, rigid steel conduits of size not less than 15 mm dia (Medium grade) fixed on surface of walls/ceilings as directed with all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core FRLS, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed by Engr-in-Charge.NOTE : (i) Old junction boxes retrieved inserviceable conditions shall be re-used in the work.However, additional junction boxes, if any required, for making new point wiring other than the quantity of junction boxes retrieved from taking downof point wiring, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A\" but fixing element of any type of junction boxes new or old is deemed to be included in the rates quoted by the contractor for the above item.(ii) Wiring shall be terminated and connected to the relevant switch / controlling switch gear and relevant fittings / sockets all as directed and controlling switch / fittings shall be measured and paid for separately under appropriate item of Schedule `A\". Copper Cable - Polycab/Havells/Finolex/L&TSteel Conduit- NIC/TATA/Jindal/Kalinga/AKG |
| 9 | All as per BOQ Srl item No 2.00 above but point wiring with using 4 Sqmm (nominal area) stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable for 16 Amps Flame proof Switch and socket complete all as specified and directed by Engr-in-Charge. |
| 10 | S& F in replacement flame proof rotary type with termination box LM6, 16A single pole 250V weather proof complete all as specified and directed by Engr in Charge.Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/SHYAM Switchgears/ Syska/Bajaj/Philips |
| 11 | Supplying & fixing flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 16 Amps complete all as specified & directed by Engineer-in-Charge. Make – Cat part No. SS/OA/1010 -1 of Sudhir Switchgears Ltd or equivalent in Crompton Greaves/ Shyam Switchgears/ Bajaj/Philips |
| 12 | S & F forsub main wiring for circuit/ submain wiring alongwith earth wire with two run of 6 sqmm of , PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100Volts grade and one run of 6 sqmm, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, and in stove enameled steel conduit not less than 15 mm including replacing the junction boxescomplete all as specified and directed by Engr-in-Charge. |
| 13 | Supply and Fixing in replacement stove enamelledwelded rigid steel conduit 25mm dia flame proof complete all as specifed and directed by Engr in Charge |
| 14 | S&F in repairflame proof point weather proof LED tube light fitting box type with 1x16 W led tube fitting including connecting electrically to ceiling using flexible 3 core PVC insulated over all sheated with flexible copper conductor of size .75 Sqmm all as required complete all as specified & directed by Engr-in-charge. Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/SHYAM Switchgears/ Syska/Bajaj/Philips |
| 15 | S&F LED light fitting1x9 watt/1x10 watt bulk head luminaires including LED light driver holder connecting up with three core copper flexible conductor cable of suitable size.Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/SHYAM Switchgears/ Syska/Bajaj/Philips |
| 16 | Supply & fixing flameproof distribution board 4way triple pole & neutral enclosures with and including supply and fixing 01 No MCB triple pole & neutral 63 Amps & 03 Nos Nos MCB single pole & neutral upto 32Amps C Series complete all as specified and directed.Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/SHYAM Switchgears/ Syska/Bajaj/Philips |
| 17 | Supply and fixing flame proof distribution board 6 way single pole and LM-6 metal enclosure with and including supply & fixing 01 No MCbs double pole and neutral 32 Amps & 03 Nos MCB single pole type 10 Amps C series complete all as specified and directed.Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/SHYAM Switchgears/ Syska/Bajaj/Philips |
| 18 | Supply and fixing flame proof Cum weather proof exhaust fan heavy duty motor Body , LM-6, Blade aluminium, Frame MS with louvers complete of 300mm,1400 RPM size with bolts, nuts and washers andbolts embeded in wall including provision of PVC flexible copper cable of Size 23/00.0076 three core from ceiling rose to exhaust fan for giving connection complete all as specified and Directed.Make : Havells/Bajaj/Crompton Greaves/Sudhir Switchgears/SHYAM Switchgears/ Syska/Bajaj/Philips |
| 19 | M&L in repair Earthing complete with copper plate electrode 600x600x3.15mm thick electrode burried directly in ground not less than 3.0 mtr deep below normal ground level with top edge of earth plate not less than 2.5 mtr below normal ground level connected to and including and 20x3 mm copper strip as earth lead by means of bolt ,nuts, check nuts, and washers of stainless steel and duly welded incl PCC pit in PCC 1:2:4 type B-I angle iron 40x40x3mm frame, pit in PCC 1:2:4 type B-I cover 40mm reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20mm bore with funnel and wire mashand medium grade GI protectionpipe 40mm boreand earth wire up all as shown in electrical plate No 3 of MES SSR- Part-I all as directed and specified by Engineer-in-charge. Note : Excavation work should be done by manpower only. ( Earth test should be done bycontractor and if required result is not found entire earthing should by contractor again) |
| 20 | M &Lfor XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area35.0 Sqmm, 3.5-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and as directed. |
| 21 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. orfor shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin hardanddense Soilcompleteall as specified and directed. |
| 22 | Returning filling in including spreading levelling, watering and well ramming in layer each not exc. 25 cm thick in a Hard/Dense soil complete all as specified and directed by Enginer-in-Charge. |
| 23 | Removing surplus soil to a distance not exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for PCC cable coverClass LV, Type I,flat,size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed.Note:-Excavation and earth work to be measured and paid for separately |
| 25 | M &Lfor Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge.Note: Punned thickness shall be measured. |
AI Tender Summary
Tender Timeline
Jan 16, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 16, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 23, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 23, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender