|
| 1 | SCHEDULE ‘A’ PART - I (Provision of water supply scheme for COBs Kangpokpi of 22 Assam Rifles Bn at Jwalamukhi) |
| 2 | M&L for carrying out GEO physical survey for ground water exploraionby electrical resistively techniue at dffrent location spread at suitable inervals to find out lithological features or area thickness of layers and most favoravle site for ground water strata based on geological parameters and disposion of sub surface formation aquifer upto depth of 200mtres and submitted a detailed report in the regard. |
| 3 | M&L for trial bore of pilot holes of 200mm dia at any kind of soil incl hard/stone boulder by direct rig machine hard rock keeping soil samples at every 3.00 mtr of whatever there is change in strata upto the required depth till suitable water bearing strata is obtained (From ground level to 60 mtr) |
| 4 | M&L for trial bore of pilot holes of 200mm dia at any kind of soil incl hard/stone boulder by direct rig machine hard rock keeping soil samples at every 3.00 mtr of whatever there is change in strata upto the required depth till suitable water bearing strata is obtained (From 60 mtr to not exceeding 120 mtr) |
| 5 | M/L for repairing the pilot hole 200mm dia to an enlarged bore hole upto 350mm dia by using direct rotary circulation (From ground level to 60 mtr) |
| 6 | M/L for repairing the pilot hole 200mm dia to an enlarged bore hole upto 350mm dia by using direct rotary circulation (From 60 mtr to 120 mtr) |
| 7 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS blank pipe having threads at the ends of minimum length 75mm (08 thread to and inch) socket of 150 mm length thread to match the pipe 150 mm length thread to match the pipe 150mm dia ERW with wall thickness not less than 6mm all as directed by Engr-in-Charge. |
| 8 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS slotted pipe ERW male/female having threads at the ends of minimum length 75mm (08 thread to and inch) socket of 150 mm length thread to match the pipe incl joint and welding 150 mm dia wall thickness not less than 6mm in all directed by Engr-in-Charge. |
| 9 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS housing pipe ERW male/female having threads at the end of minimum length 75 mm (08 thread to an inch) socket of 150 mm length thread to match the pipe incl joint and welding 200 mm dia with wall thickness not less than 6 mm in all as directed Engr-in-Charge. |
| 10 | Supply and fixing of 150 mm dia MS bail plug with entered anti corrosive epoxy paint |
| 11 | Supply and fixing with reducing socket 200mm x 150 mm dia |
| 12 | Supply and fixing of 200 mm dia MS housing clamp incl anti corrosive paint |
| 13 | Supply and fixing of MS well cap for 200 mm made of steel plate etc incl att complete |
| 14 | Supply and stacking pea size round washed gravel of 3 mm to 4 mm dia size of Barakar River (W B) and packing in angular space between the pipe assemble and bore hold as per direction of Engr-in-Charge |
| 15 | Washing and developing tube well by pumping with air compressor by vertical turbine pump for a minimum period of 03 days (8 hrs per day) as required water in sand and mud free with necessary arrangement for testing the yield with (V) notches incl hire labour and fuel charges for all water bactoricalozically and chemically etc all as direct by Engr-in-Charge |
| 16 | Supply and achoring of steel supply wire of 6 mm dia having PVC sleeve above the rope with submersible pump and fastering the same security above the ground level near the bore well etc in all as direct by Engr-in-Charge |
| 17 | M/L of submersible pump set lifting stand including to 100mm dia GI post ht upto 4 mtr and one 80mm dia GI pipe 2 mtr length supplying and fixing of chain pully suitable for 7.5 HP submersible pump set, civil foundation incl all connected arrangement as reqd for lowering/ taking up of above pump set in all as per directed engineer in charge. |
| 18 | Supply, installation, testing and commissioning of submersible pump set capacity 7.5 HP,AC 3 Phase, 415 Volt, 50 Hz 2880 RPM suitable for 200 mm dia borewell incl lifting and lowering of pump set etc in all complete as per directed by Engr-in-Charge (make KSB/Clama/ CRI/Kirloskar) and incl starter and outdoor fitting arrangement. |
| 19 | Supply and laying of three core flate PVC insulated PVC Sheathed copper conductor submersible cable 6 Sqmm (make-Havells/Plaza/HPL) |
| 20 | Providing and fixing 50mm dia GI pipe A grade complete with GI fittings incl trenches and refilling etc for section pipe of submersible pump |
| 21 | S/F gun metal non returning valve 50mm dia |
| 22 | Construction masonary chamber 90x90x100 cm inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100mm top diameter, 160 mm bottom diameter and 180 deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm mominal size) ,i/c necessary exacavation foundation concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40mm mominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with floating coat of neat cement complete as per std design; with common brand clay F.P.S (non modular) bricks of class designation 7.5. |
| 23 | Provn of 01 No RCC UG sump 5000 ltr as per DrgNo TRG/Engr/119 Sheet No 1/3 to 3/3 |
| 24 | Supply installation commissioning and testing of iron removal water treatment plant complete with pressure filter capacity of 3000 gallon per hours incl suitable PCC platform follor even and smoth surface complete and chlorine dosing ane alum dosing automatic metering incl soloution 100 ltr HDPE tank stainer and NRV as per folowing specification Vesel company MMP (a) structural composist vessel of plintiar ISo-9001 tested upto min 5kg per cm2 height of vessel 72 inch (without stand) 9b best quality filter media for eg-gravels,rebbles,banker sand Mn o2 lumps arthiracle grren sand etc 9) inner connecting pipe and creative valves (d) multipart vessel for easy maint back wash rise by pass etc (e) GI fiting for eg tee,elbow,socket,union etc (f) top and bottom distribution system working pressure 10 kg per cm2 (h) dosing rate-1.4 ltr/hrs with 1005 adjustment (j) solution tank MS linked rubber (k) capacity of solution tank 30 ltr-02 nos (l) Dosing port -SS/PVC/PP (m) solution hydrochloride beaxthing and alum |
| 25 | Provn of PS tank 2.4X 2.4X 1.2m over 6 mtr height stagging as per drg no TRG/Engr/428/09 Sheet No 2/2 |
| 26 | Supply installation commissioning and testing of floor mounted cubical electric control power board made out of 18 SWG Ms sheet (factory made) angle iron frame 45x45x8mm sixe 2x1x0.45 mtr suitable to run 5Hp and 2 Hp electric pump set and consist of following items incl PCC base internal wiring with suitable cooper conductor (a) MCCB 4 pole 100 amp -01 no, (b) MCB TPN 40 Amp-02 Nos, (c) single phase preventor device-01 se, (d) voltmeter 0-500 volt(Digial LED) with selector switch -01 no, (e) Amp 0-5 Amp with selector switch incl CT-01 No, (f) Indiactor Set-01 no, (g)Change over switch 100 amp-01 no, (h) copper bus bar 600mm long & 4mm thick chamber 100 Amp-01 saet in each panel4 strip, 3 phase. the panel board shall be mounted on suitable PCC base and copper conductor of suitable size shall be laid from panel board to motor and input panel board make for (a to j) Havells,HPl and L&T |
| 27 | S/F GI pipe 40mm dia incl treanchings fitting with required fittings |
| 28 | S/F brass gate valve 40mm dia |
| 29 | S/F brass gate valve 50mm dia |
| 30 | S/F brass gate valve 20mm dia |
| 31 | S/F GI pipe 20mm dia |
| 32 | Supply only chain pully 2 Ton capacity with all accessories. |
| 33 | SCHEDULE ‘A’ PART - II (Provision of water supply scheme for Motbung of AR Bn 22 Assam Rifles at Jwalamukhi) |
| 34 | M&L for carrying out GEO physical survey for ground water exploraionby electrical resistively techniue at dffrent location spread at suitable inervals to find out lithological features or area thickness of layers and most favoravle site for ground water strata based on geological parameters and disposion of sub surface formation aquifer upto depth of 200mtres and submitted a detailed report in the regard. |
| 35 | M&L for trial bore of pilot holes of 200mm dia at any kind of soil incl hard/stone boulder by direct rig machine hard rock keeping soil samples at every 3.00 mtr of whatever there is change in strata upto the required depth till suitable water bearing strata is obtained (From ground level to 60 mtr) |
| 36 | M&L for trial bore of pilot holes of 200mm dia at any kind of soil incl hard/stone boulder by direct rig machine hard rock keeping soil samples at every 3.00 mtr of whatever there is change in strata upto the required depth till suitable water bearing strata is obtained (From 60 mtr to not exceeding 120 mtr) |
| 37 | M/L for repairing the pilot hole 200mm dia to an enlarged bore hole upto 350mm dia by using direct rotary circulation (From ground level to 60 mtr) |
| 38 | M/L for repairing the pilot hole 200mm dia to an enlarged bore hole upto 350mm dia by using direct rotary circulation (From 60 mtr to not exceeding 120 mtr) |
| 39 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS blank pipe having threads at the ends of minimum length 75mm (08 thread to and inch) socket of 150 mm length thread to match the pipe 150 mm length thread to match the pipe 150mm dia ERW with wall thickness not less than 6mm all as directed by Engr-in-Charge. |
| 40 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS slotted pipe ERW male/female having threads at the ends of minimum length 75mm (08 thread to and inch) socket of 150 mm length thread to match the pipe incl joint and welding 150 mm dia wall thickness not less than 6mm in all directed by Engr-in-Charge. |
| 41 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS housing pipe ERW male/female having threads at the end of minimum length 75 mm (08 thread to an inch) socket of 150 mm length thread to match the pipe incl joint and welding 200 mm dia with wall thickness not less than 6 mm in all as directed Engr-in-Charge. |
| 42 | Supply and fixing of 150 mm dia MS bail plug with entered anti corrosive epoxy paint |
| 43 | Supply and fixing with reducing socket 200mm x 150 mm dia |
| 44 | Supply and fixing of 200 mm dia MS housing clamp incl anti corrosive paint |
| 45 | Supply and fixing of MS well cap for 200 mm made of steel plate etc incl att complete |
| 46 | Supply and stacking pea size round washed gravel of 3 mm to 4 mm dia size and packing in angular space between the pipe assemble and bore hold as per direction of Engr-in-Charge |
| 47 | Washing and developing tube well by pumping with air compressor by vertical turbine pump for a minimum period of 03 days (8 hrs per day) as required water in sand and mud free with necessary arrangement for testing the yield with (V) notches incl hire labour and fuel charges for all water bactoricalozically and chemically etc all as direct by Engr-in-Charge |
| 48 | Supply and achoring of steel supply wire of 3mm dia having PVC sleeve above the rope with submersible pump and fastering the same security above the ground level near the bore well etc in all as direct by Engr-in-Charge |
| 49 | M/L of submersible pump set lifting stand including to 100mm dia GI post ht upto 4 mtr and one 80mm dia GI pipe 2 mtr length supplying and fixing of chain pully suitable for 7.5 HP submersible pump set, civil foundation incl all connected arrangement as reqd for lowering/ taking up of above pump set in all as per directed engineer in charge. |
| 50 | Supply, installation, testing and commissioning of submersible pump set capacity 7.5 HP,AC 3 Phase, 415 Volt, 50 Hz 2880 RPM suitable for 200 mm dia borewell incl lifting and lowering of pump set etc in all complete as per directed by Engr-in-Charge (make KSB/Clama/ CRI/Kirloskar) and incl starter and outdoor fitting arrangement. |
| 51 | Supply and laying of three core flate PVC insulated PVC Sheathed copper conductor submersible cable 6 Sqmm (make-Havells/Plaza/HPL) |
| 52 | Providing and fixing 50mm dia GI pipe A grade complete with GI fittings incl trenches and refilling etc for section pipe of submersible pump |
| 53 | S/F gun metal non returning valve 50mm dia |
| 54 | Construction masonary chamber 90x90x100 cm inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100mm top diameter, 160 mm bottom diameter and 180 deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm mominal size) ,i/c necessary exacavation foundation concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40mm mominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with floating coat of neat cement complete as per std design; with common brand clay F.P.S (non modular) bricks of class designation 7.5. |
| 55 | Repair of existing IRP of capacity 5000 G/L incl replacement of filter media, gravels, pebbles, sand, MNO2, complete including painting and making serviceability of IRP, ALUM DOSING and CHLORINE dosing unit |
| 56 | Provn of PS tank of 6 mtr height stagging as per drg no TRG/Engr/428/09 Sheet No 2/2 |
| 57 | Supply installation commissioning and testing of floor mounted cubical electric control power board made out of 18 SWG Ms sheet (factory made) angle iron frame 45x45x8mm sixe 2x1x0.45 mtr suitable to run 5Hp and 2 Hp electric pump set and consist of following items incl PCC base internal wiring with suitable cooper conductor (a) MCCB 4 pole 100 amp -01 no, (b) MCB TPN 40 Amp-02 Nos, (c) single phase preventor device-01 se, (d) voltmeter 0-500 volt(Digial LED) with selector switch -01 no, (e) Amp 0-5 Amp with selector switch incl CT-01 No, (f) Indiactor Set-01 no, (g)Change over switch 100 amp-01 no, (h) copper bus bar 600mm long & 4mm thick chamber 100 Amp-01 saet in each panel4 strip, 3 phase. the panel board shall be mounted on suitable PCC base and copper conductor of suitable size shall be laid from panel board to motor and input panel board make for (a to j) Havells,HPl and L&T |
| 58 | S/F GI pipe 40mm dia incl treanchings fitting with required fittings |
| 59 | S/F brass gate valve 40mm dia |
| 60 | S/F brass gate valve 50mm dia |
| 61 | S/F brass gate valve 20mm dia |
| 62 | S/F GI pipe 20mm dia |
| 63 | Supply only chain pully 2 Ton capacity with all accessories. |
| 64 | SCHEDULE ‘A’ PART - III (Provision of water supply scheme forSaikul of AR Bn 22 Assam Rifles at Jwalamukhi) |
| 65 | M&L for carrying out GEO physical survey for ground water exploraionby electrical resistively techniue at dffrent location spread at suitable inervals to find out lithological features or area thickness of layers and most favoravle site for ground water strata based on geological parameters and disposion of sub surface formation aquifer upto depth of 200mtres and submitted a detailed report in the regard. |
| 66 | M&L for trial bore of pilot holes of 200mm dia at any kind of soil incl hard/stone boulder by direct rig machine hard rock keeping soil samples at every 3.00 mtr of whatever there is change in strata upto the required depth till suitable water bearing strata is obtained (From ground level to 60 mtr) |
| 67 | M&L for trial bore of pilot holes of 200mm dia at any kind of soil incl hard/stone boulder by direct rig machine hard rock keeping soil samples at every 3.00 mtr of whatever there is change in strata upto the required depth till suitable water bearing strata is obtained (From 60 mtr to not exceeding 120 mtr) |
| 68 | M/L for repairing the pilot hole 200mm dia to an enlarged bore hole upto 350mm dia by using direct rotary circulation (From ground level to 60 mtr) |
| 69 | M/L for repairing the pilot hole 200mm dia to an enlarged bore hole upto 350mm dia by using direct rotary circulation (60 mtr to not exceeding 120 mtr) |
| 70 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS blank pipe having threads at the ends of minimum length 75mm (08 thread to and inch) socket of 150 mm length thread to match the pipe 150 mm length thread to match the pipe 150mm dia ERW with wall thickness not less than 6mm all as directed by Engr-in-Charge. |
| 71 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS slotted pipe ERW male/female having threads at the ends of minimum length 75mm (08 thread to and inch) socket of 150 mm length thread to match the pipe incl joint and welding 150 mm dia wall thickness not less than 6mm in all directed by Engr-in-Charge. |
| 72 | Supply assembling and lowering in position with centering guide in the bore hole liner assembly of MS housing pipe ERW male/female having threads at the end of minimum length 75 mm (08 thread to an inch) socket of 150 mm length thread to match the pipe incl joint and welding 200 mm dia with wall thickness not less than 6 mm in all as directed Engr-in-Charge. |
| 73 | Supply and fixing of 150 mm dia MS bail plug with entered anti corrosive epoxy paint |
| 74 | Supply and fixing with reducing socket 200mm x 150 mm dia |
| 75 | Supply and fixing of 200 mm dia MS housing clamp incl anti corrosive paint |
| 76 | Supply and fixing of MS well cap for 200 mm made of steel plate etc incl att complete |
| 77 | Supply and stacking pea size round washed gravel Barakar Riverof 3 mm to 4 mm dia size and packing in angular space between the pipe assemble and bore hold as per direction of Engr-in-Charge |
| 78 | Washing and developing tube well by pumping with air compressor by vertical turbine pump for a minimum period of 03 days (8 hrs per day) as required water in sand and mud free with necessary arrangement for testing the yield with (V) notches incl hire labour and fuel charges for all water bactoricalozically and chemically etc all as direct by Engr-in-Charge |
| 79 | Supply and achoring of steel supply wire of 3mm dia having PVC sleeve above the rope with submersible pump and fastering the same security above the ground level near the bore well etc in all as direct by Engr-in-Charge |
| 80 | M/L of submersible pump set lifting stand including to 100mm dia GI post ht upto 4 mtr and one 80mm dia GI pipe 2 mtr length supplying and fixing of chain pully suitable for 5 HP submersible pump set, civil foundation incl all connected arrangement as reqd for lowering/ taking up of above pump set in all as per directed engineer in charge. |
| 81 | Supply, installation, testing and commissioning of submersible pump set capacity 5 HP,AC 3 Phase, 415 Volt, 50 Hz 2880 RPM suitable for 200 mm dia borewell incl lifting and lowering of pump set etc in all complete as per directed by Engr-in-Charge (make KSB/Clama/ CRI/Kirloskar) and incl starter and outdoor fitting arrangement. |
| 82 | Supply and laying of three core flate PVC insulated PVC Sheathed copper conductor submersible cable 6 Sqmm (make-Havells/Plaza/HPL) |
| 83 | Providing and fixing 50mm dia GI pipe A grade complete with GI fittings incl trenches and refilling etc for section pipe of submersible pump |
| 84 | S/F gun metal non returning valve 50mm dia |
| 85 | Construction masonary chamber 90x90x100 cm inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100mm top diameter, 160 mm bottom diameter and 180 deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm mominal size) ,i/c necessary exacavation foundation concrete 1:5:10 (1 cement : 5 coarse sand: 10 graded stone aggregate 40mm mominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with floating coat of neat cement complete as per std design; with common brand clay F.P.S (non modular) bricks of class designation 7.5. |
| 86 | Provn of 01 No RCC UG sump 5000 ltr as per DrgNo TRG/Engr/119 Sheet No 1/3 to 3/3 |
| 87 | Supply installation commissioning and testing of iron removal water treatment plant complete with pressure filter capacity of 3000 gallon per hours incl suitable PCC platform follor even and smoth surface complete and chlorine dosing ane alum dosing automatic metering incl soloution 100 ltr HDPE tank stainer and NRV as per folowing specification Vesel company MMP (a) structural composist vessel of plintiar ISo-9001 tested upto min 5kg per cm2 height of vessel 72 inch (without stand) 9b best quality filter media for eg-gravels,rebbles,banker sand Mn o2 lumps arthiracle grren sand etc 9) inner connecting pipe and creative valves (d) multipart vessel for easy maint back wash rise by pass etc (e) GI fiting for eg tee,elbow,socket,union etc (f) top and bottom distribution system working pressure 10 kg per cm2 (h) dosing rate-1.4 ltr/hrs with 1005 adjustment (j) solution tank MS linked rubber (k) capacity of solution tank 30 ltr-02 nos (l) Dosing port -SS/PVC/PP (m) solution hydrochloride beaxthing and alum |
| 88 | Provn of PS tank 2.4X 2.4 X1.2 m over 6 mtr height stagging as per drg no TRG/Engr/428/09 Sheet No 3/3 |
| 89 | Supply installation commissioning and testing of floor mounted cubical electric control power board made out of 18 SWG Ms sheet (factory made) angle iron frame 45x45x8mm sixe 2x1x0.45 mtr suitable to run 5Hp and 2 Hp electric pump set and consist of following items incl PCC base internal wiring with suitable cooper conductor (a) MCCB 4 pole 100 amp -01 no, (b) MCB TPN 40 Amp-02 Nos, (c) single phase preventor device-01 se, (d) voltmeter 0-500 volt(Digial LED) with selector switch -01 no, (e) Amp 0-5 Amp with selector switch incl CT-01 No, (f) Indiactor Set-01 no, (g)Change over switch 100 amp-01 no, (h) copper bus bar 600mm long & 4mm thick chamber 100 Amp-01 saet in each panel4 strip, 3 phase. the panel board shall be mounted on suitable PCC base and copper conductor of suitable size shall be laid from panel board to motor and input panel board make for (a to j) Havells,HPl and L&T |
| 90 | S/F GI pipe 40mm dia \"M\" grade incl trenching fitting and requuired fittings |
| 91 | S/F brass gate valve 40mm dia |
| 92 | S/F brass gate valve 50mm dia |
| 93 | S/F brass gate valve 20mm dia |
| 94 | S/F GI pipe 20mm dia |
| 95 | Supply only chain pully 2 Ton capacity with all accessories. |
