Housing Urban and Rular Development Government Departments Closing in 0 days TDR #41387071

Auction Of I) 125 Kg/ Hr Bio Medical Incinerator, Ii) Dismantled Electrical Materials From Demolishing Type Iii Quarters 9 To 12 & 19 To 24 (Total 10Nos). Iii) Dismantled Electrical Materials.

Issued by Government Departments · Pondicherry, Puducherry
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jan 2024
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Offline

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pondicherry → Puducherry
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Auction Of I) 125 Kg/ Hr Bio Medical Incinerator, Ii) Dismantled Electrical Materials From Demolishing Type Iii Quarters 9 To 12 & 19 To 24 (Total 10Nos). Iii) Dismantled Electrical Materials. 1 01 Set 125 Kg/ Hr Bio Medical Incinerator with following provisions a) Main incinerator with (i) Refractor lined Primary and Secondary Chamber, (ii) Refractory lined Main charging door and ash cleaning chamber. b) 2 Nos. fully automatic oil burner for primary chamber and for secondary chamber c) Centrifugal forced draft combustion air fan with motor. d) Auto-loading device in the form Double Flap Damper Valve (DFDV) mechanism with outer gate manual and inner damper motorized. e) Suitable flow measurement device on the primary and secondary air ducting. f) Emergency stack/vent. g) High Pressure venturi scrubber of stainless steel of SS316 L grade. h) j) Cyclonic type droplet separator Recirculation tank i) I.D Fan with RFP lined MS casing & SS 316 L impeller with motor. j) Recirculation pump with motor along with piping & valves. k) SS304 water piping for scrubber. I) Interconnecting ducting with battery limits. m) Instruments, valves, dampers and fittings within battery limits. n) PLC based control panel with necessary instruments. o) Data recording and printing device. p) Fuel SURVEY REPORT NO.01/EE(E)(PDY)/2022-2023 (125 Kg/Hr Bio Medical incinerator) 6 tank along with piping, valves & strainers between bulk storage to day tank & to burners. q) Operating tools & tackles like rake, hoe, shovel, two teeth scrapper. r) Portable stack monitoring device for CO, CO2 & 02. s) Self supported mild steel FRP lined chimney of 500 mm top dia and 30 metres height - 2 Nos. 125 Kg/Hr Bio Medical Incinerator with following provisions a) Main incinerator with (1) Refractory lined Primary and Secondary Chamber, (ii) Refractory lined Main charging door and ash cleaning chamber b) 2 Nos fully automatic oil burner for primary chamber and for secondary chamber c) Centrifugal forced draft combustion air fan with motor d) Auto-loading device in the form Double Flap Damper Valve (DFDV) mechanism with outer gate manual and inner damper motorized e) Suitable flow measurement device on the primary and secondary air ducting f) Emergency stack/vent g) High Pressure venturi scrubber of stainless steel of SS316 L grade h) Cyclonic type droplet separator Recirculation tank i) 1.D Fan with RFP lined MS casing & SS 316 L impeller with motor j) Recirculation pump with motor along with piping & valves. k) 55304 water piping for scrubber l) Interconnecting ducting with battery limits. m) Instruments, valves, dampers and fittings within battery limits n)PLC based control panel with necessary instruments o) Data recording and printing device p) Fuel tank along with piping, valves & strainers between bulk storage to day tank & to burners. q) Operating tools & tackles like rake, hoe, shovel, two teeth scrapper. r) Portable stack monitoring device for CO, CO2 & 02. s) Self supported mild steel FRP lined chimney of 500 mm top dia and 30 metres height – 2 Nos. 1 40 Nos. 1 x 36 Watt battern type light fitting 2 40 Nos. 1200mm Ceiling fan 3 10 Nos. 300mm Exhaust Fan 4 10 Nos. Bulk head fitting 5 100 Nos. Power Plugs 5A 6 75 Meters 1.5 Sqmm PVC insulated copper conductor cable 7 50 Meters 4 Sqmm PVC insulated copper conductor cable 8 100 Meters 3.5 x 35 Sqmm Cable 9 10 Nos. 6 way SPN MCB DB 10 150 Nos. SP MCB 11 4 Nos. Street Light Pole 12 20 Nos. Power Plugs 15A 1 33 Nos. BALL BEARING 2 12 Nos. TWIN BOX TYPE FITTING (4 FEET) 3 373 Nos. CEILING FAN (1200 / 1400mm) 4 110 Nos. MCBS (6- 40A SP/DP/FP/RCCS FP) 5 290 Nos. BALLAST (CHOCK) (1*40/2*36/2*28/11W/28/EL) 6 498 Nos. PL LAMP 36W / CFL 9W,11W/NL/IN CONDITION LAMP 7 2668 Nos. STARTER 40W 8 545 Nos. CAPACITOR 2.5 MFD 9 403 Nos. PIANO TYPE SWITCH 5A 10 99 Nos. PIANO TYPE SOCKET 5A 11 98 Nos. PIANO TYPE SWITCH 15A 12 95 Nos. PIANO TYPE SOCKET 15A 13 2484 Nos. FLUORSCENT LAMP CAP SET (36W/28/14W) 14 61 Nos. EXHAUST FAN (300/400/450mm) 15 26 Nos. WALL MOUNTED FAN 16 1 Lot 500 KVA DG SET Accessories such as AVR, TIMER,SWITCHES 17 464 Nos. COPPER CHOKE (36/40W) 18 16 Nos. FUC Motor AC Unit 19 4 Nos. FUC 3 WAY VALUE AC UNIT 20 13 Nos. FCU WITH MOTOR 21 1 Nos. SPLIT AC 1 TON 22 1 Nos. SPLIT AC 2 TON 23 4 Nos. NEEDLE BERAINING (22 KVA) 24 2 Nos. GUIDE CHANNEL BEARING WITH PIN 25 1 Nos. PLUG AND SOCKET (Male & Female) 26 6 Nos. OPERATION ROD ITH ADAPTER 27 1 Nos. PLUG ABD SOCKET MOVING BRACKET 28 2 Nos. COUNTER 29 3 Nos TNC SWITCH 30 3 Nos SPRING CONTROL SWITCH 31 1 Nos INDICATION LAMP(R,Y,B) VCB (ON,OFF/SPRING CHARGE) 32 1 Nos INDICATION LAMP- TRIP CIRCUIT HEALTHY /SPRING CHARGE) 33 9 Nos BUS BAR SUPPORT INSULATOR 34 3 Nos VACCUM INTERRUPTER 35 3 Nos INTERRUPTOR HOUSING 36 6 Nos BALL END (12 mm) 37 6 Nos FINGER CONTACT 38 1 Nos ELECTRNIC CONTROL PANEL (DG SET MATERIAL) (142 TEETH) 39 4 Nos 3p/2p/4p CONTRACTOR (DG SET MATERIAL) (40/400a) 40 2 Nos LT CUBICAL PANEL BOARD (1750*800*400mm) 41 1 Nos LT CUBICAL PANEL BOARD (1200*1300*400mm) 42 1 Nos LT CUBICAL PANEL BOARD (1000*2350*400mm) 43 1 Nos LT CUBICAL PANEL BOARD (1000*1200*400mm) 44 30 Mtrs ug Cable of assorted size - 30 mtrs. 45 510 Nos Celling Louver Fitting /Tube Light Fitting (2*36/1*36/1*2*28W) 46 4 Nos 12 V Batteries OLD 47 262 Nos PL Lamp Square Fitting (2 *2) 36W 48 3 Nos AB SWITCH (HT) 49 80 mtrs 3 1/2 x 240 sq.m, A1 Aromade HT Cable 50 7 Nos Surface fitting 12W LED 51 29 Nos Fan Regulator 52 46 Nos Cylinder Type HRC Fuse (63A /125A) 53 5 Nos Isolator FR,TP, DP 54 5 Nos ELCB 40 A 55 17 Nos HRC Fuse Knife Type 56 3 Nos. PT (22 KV1) Sub station Admin 57 38 Nos Flood Light 250W 58 2 Nos 180AH Make: KOEI (TATA) 59 1 Nos Electronic Governor Controller Board 60 5 Nos 1/2 weight loaded safety valve with weight fabricated by SS shaft 61 10 Nos Pressure Guage 4 Dia 0 to 100 62 6 Nos 1 SS Drainage Ball Valve 63 3.2 mtrs 150mm GI Pipe with Accessories 64 4200 Ltrs Genset Old Oil 1 16 Nos Klite Fitting 2 25 Nos Anglo Fitting (9W) 3 19 Nos Myna Fitting (11) 4 10 Nos Teinkel Fitting 5 10 Nos Myna (RECTANGULAR FITTING) 6 8 Nos OLD TYPE REGULATOR 7 60 Nos LOADSTER MCB 15A (OLD TYPE) 8 39 Nos FAN REGULATOR (300MM) 9 4 Nos FAN REGULATOR (1200mm usha OLD TYPE) 10 20 Nos STREET LIGHT CKOKE (250w) 11 2 Nos STREET LIGHT CHOKE (70w) 12 11 Nos STREET LIGHT CHOKE (400w) 13 9 Nos STREET LIGHT IGNATOR 14 6 Nos EXHAUST FAN OUTER FRAME 15 3 Nos WH METER 3P OLD 16 600 Nos RING TYPE PORCELAIN SITCH 5A SOCKET (50 BOX) 17 109 Nos RING TYPE PORCELAIN SITCH 5A SOCKET (7 BOX) 18 116 Nos RING TYPE PORCELAIN SITCH 5A SOCKET (8 BOX) 19 8 Nos FAN REGULATOR (USHA) 20 1 Nos STARTER (WATER LEVEL CONTROLLER) 21 200 Nos CELLING ROSE OLD TYPE 22 74 Nos BOX 23 3 Nos STREET LIGHT CHOKE 150W (BAJAJ) 24 23 Nos STREET LIGHT CHOKE 250W (BAJAJ, OSRAM, PHILIPS) 25 50 Nos CAPACITOR 20 MFD 26 6 Nos HPMV LAMP (125W) 27 440 Nos SWITCH 16A (SAINCO) 22 Box 2 SR No.01/EE(E)(PDY)/2023-24 Rs. 179750.00 15,815.00 3 SR No.02/EE(E)(PDY)/2023-24 Rs. 3458719.00 2,73,564.00 4 SR No.03/EE(E)(PDY)/2023-24 Rs.

AI Tender Summary

OUR REF NO 41387071
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 17-01-2024
Authority
Authority Name Central Public Works Department
Work Description Auction Of I) 125 Kg/ Hr Bio Medical Incinerator, Ii) Dismantled Electrical Materials From Demolishing Type Iii Quarters 9 To 12 & 19 To 24 (Total 10Nos). Iii) Dismantled Electrical Materials. 1 01 Set 125 Kg/ Hr Bio Medical Incinerator with following provisions a) Main incinerator with (i) Refractor lined Primary and Secondary Chamber, (ii) Refractory lined Main charging door and ash cleaning chamber. b) 2 Nos. fully automatic oil burner for primary chamber and for secondary chamber c) Centrifugal forced draft combustion air fan with motor. d) Auto-loading device in the form Double Flap Damper Valve (DFDV) mechanism with outer gate manual and inner damper motorized. e) Suitable flow measurement device on the primary and secondary air ducting. f) Emergency stack/vent. g) High Pressure venturi scrubber of stainless steel of SS316 L grade. h) j) Cyclonic type droplet separator Recirculation tank i) I.D Fan with RFP lined MS casing & SS 316 L impeller with motor. j) Recirculation pump with motor along with piping & valves. k) SS304 water piping for scrubber. I) Interconnecting ducting with battery limits. m) Instruments, valves, dampers and fittings within battery limits. n) PLC based control panel with necessary instruments. o) Data recording and printing device. p) Fuel SURVEY REPORT NO.01/EE(E)(PDY)/2022-2023 (125 Kg/Hr Bio Medical incinerator) 6 tank along with piping, valves & strainers between bulk storage to day tank & to burners. q) Operating tools & tackles like rake, hoe, shovel, two teeth scrapper. r) Portable stack monitoring device for CO, CO2 & 02. s) Self supported mild steel FRP lined chimney of 500 mm top dia and 30 metres height - 2 Nos. 125 Kg/Hr Bio Medical Incinerator with following provisions a) Main incinerator with (1) Refractory lined Primary and Secondary Chamber, (ii) Refractory lined Main charging door and ash cleaning chamber b) 2 Nos fully automatic oil burner for primary chamber and for secondary chamber c) Centrifugal forced draft combustion air fan with motor d) Auto-loading device in the form Double Flap Damper Valve (DFDV) mechanism with outer gate manual and inner damper motorized e) Suitable flow measurement device on the primary and secondary air ducting f) Emergency stack/vent g) High Pressure venturi scrubber of stainless steel of SS316 L grade h) Cyclonic type droplet separator Recirculation tank i) 1.D Fan with RFP lined MS casing & SS 316 L impeller with motor j) Recirculation pump with motor along with piping & valves. k) 55304 water piping for scrubber l) Interconnecting ducting with battery limits. m) Instruments, valves, dampers and fittings within battery limits n)PLC based control panel with necessary instruments o) Data recording and printing device p) Fuel tank along with piping, valves & strainers between bulk storage to day tank & to burners. q) Operating tools & tackles like rake, hoe, shovel, two teeth scrapper. r) Portable stack monitoring device for CO, CO2 & 02. s) Self supported mild steel FRP lined chimney of 500 mm top dia and 30 metres height – 2 Nos. 1 40 Nos. 1 x 36 Watt battern type light fitting 2 40 Nos. 1200mm Ceiling fan 3 10 Nos. 300mm Exhaust Fan 4 10 Nos. Bulk head fitting 5 100 Nos. Power Plugs 5A 6 75 Meters 1.5 Sqmm PVC insulated copper conductor cable 7 50 Meters 4 Sqmm PVC insulated copper conductor cable 8 100 Meters 3.5 x 35 Sqmm Cable 9 10 Nos. 6 way SPN MCB DB 10 150 Nos. SP MCB 11 4 Nos. Street Light Pole 12 20 Nos. Power Plugs 15A 1 33 Nos. BALL BEARING 2 12 Nos. TWIN BOX TYPE FITTING (4 FEET) 3 373 Nos. CEILING FAN (1200 / 1400mm) 4 110 Nos. MCBS (6- 40A SP/DP/FP/RCCS FP) 5 290 Nos. BALLAST (CHOCK) (1*40/2*36/2*28/11W/28/EL) 6 498 Nos. PL LAMP 36W / CFL 9W,11W/NL/IN CONDITION LAMP 7 2668 Nos. STARTER 40W 8 545 Nos. CAPACITOR 2.5 MFD 9 403 Nos. PIANO TYPE SWITCH 5A 10 99 Nos. PIANO TYPE SOCKET 5A 11 98 Nos. PIANO TYPE SWITCH 15A 12 95 Nos. PIANO TYPE SOCKET 15A 13 2484 Nos. FLUORSCENT LAMP CAP SET (36W/28/14W) 14 61 Nos. EXHAUST FAN (300/400/450mm) 15 26 Nos. WALL MOUNTED FAN 16 1 Lot 500 KVA DG SET Accessories such as AVR, TIMER,SWITCHES 17 464 Nos. COPPER CHOKE (36/40W) 18 16 Nos. FUC Motor AC Unit 19 4 Nos. FUC 3 WAY VALUE AC UNIT 20 13 Nos. FCU WITH MOTOR 21 1 Nos. SPLIT AC 1 TON 22 1 Nos. SPLIT AC 2 TON 23 4 Nos. NEEDLE BERAINING (22 KVA) 24 2 Nos. GUIDE CHANNEL BEARING WITH PIN 25 1 Nos. PLUG AND SOCKET (Male & Female) 26 6 Nos. OPERATION ROD ITH ADAPTER 27 1 Nos. PLUG ABD SOCKET MOVING BRACKET 28 2 Nos. COUNTER 29 3 Nos TNC SWITCH 30 3 Nos SPRING CONTROL SWITCH 31 1 Nos INDICATION LAMP(R,Y,B) VCB (ON,OFF/SPRING CHARGE) 32 1 Nos INDICATION LAMP- TRIP CIRCUIT HEALTHY /SPRING CHARGE) 33 9 Nos BUS BAR SUPPORT INSULATOR 34 3 Nos VACCUM INTERRUPTER 35 3 Nos INTERRUPTOR HOUSING 36 6 Nos BALL END (12 mm) 37 6 Nos FINGER CONTACT 38 1 Nos ELECTRNIC CONTROL PANEL (DG SET MATERIAL) (142 TEETH) 39 4 Nos 3p/2p/4p CONTRACTOR (DG SET MATERIAL) (40/400a) 40 2 Nos LT CUBICAL PANEL BOARD (1750*800*400mm) 41 1 Nos LT CUBICAL PANEL BOARD (1200*1300*400mm) 42 1 Nos LT CUBICAL PANEL BOARD (1000*2350*400mm) 43 1 Nos LT CUBICAL PANEL BOARD (1000*1200*400mm) 44 30 Mtrs ug Cable of assorted size - 30 mtrs. 45 510 Nos Celling Louver Fitting /Tube Light Fitting (2*36/1*36/1*2*28W) 46 4 Nos 12 V Batteries OLD 47 262 Nos PL Lamp Square Fitting (2 *2) 36W 48 3 Nos AB SWITCH (HT) 49 80 mtrs 3 1/2 x 240 sq.m, A1 Aromade HT Cable 50 7 Nos Surface fitting 12W LED 51 29 Nos Fan Regulator 52 46 Nos Cylinder Type HRC Fuse (63A /125A) 53 5 Nos Isolator FR,TP, DP 54 5 Nos ELCB 40 A 55 17 Nos HRC Fuse Knife Type 56 3 Nos. PT (22 KV1) Sub station Admin 57 38 Nos Flood Light 250W 58 2 Nos 180AH Make: KOEI (TATA) 59 1 Nos Electronic Governor Controller Board 60 5 Nos 1/2 weight loaded safety valve with weight fabricated by SS shaft 61 10 Nos Pressure Guage 4 Dia 0 to 100 62 6 Nos 1 SS Drainage Ball Valve 63 3.2 mtrs 150mm GI Pipe with Accessories 64 4200 Ltrs Genset Old Oil 1 16 Nos Klite Fitting 2 25 Nos Anglo Fitting (9W) 3 19 Nos Myna Fitting (11) 4 10 Nos Teinkel Fitting 5 10 Nos Myna (RECTANGULAR FITTING) 6 8 Nos OLD TYPE REGULATOR 7 60 Nos LOADSTER MCB 15A (OLD TYPE) 8 39 Nos FAN REGULATOR (300MM) 9 4 Nos FAN REGULATOR (1200mm usha OLD TYPE) 10 20 Nos STREET LIGHT CKOKE (250w) 11 2 Nos STREET LIGHT CHOKE (70w) 12 11 Nos STREET LIGHT CHOKE (400w) 13 9 Nos STREET LIGHT IGNATOR 14 6 Nos EXHAUST FAN OUTER FRAME 15 3 Nos WH METER 3P OLD 16 600 Nos RING TYPE PORCELAIN SITCH 5A SOCKET (50 BOX) 17 109 Nos RING TYPE PORCELAIN SITCH 5A SOCKET (7 BOX) 18 116 Nos RING TYPE PORCELAIN SITCH 5A SOCKET (8 BOX) 19 8 Nos FAN REGULATOR (USHA) 20 1 Nos STARTER (WATER LEVEL CONTROLLER) 21 200 Nos CELLING ROSE OLD TYPE 22 74 Nos BOX 23 3 Nos STREET LIGHT CHOKE 150W (BAJAJ) 24 23 Nos STREET LIGHT CHOKE 250W (BAJAJ, OSRAM, PHILIPS) 25 50 Nos CAPACITOR 20 MFD 26 6 Nos HPMV LAMP (125W) 27 440 Nos SWITCH 16A (SAINCO) 22 Box 2 SR No.01/EE(E)(PDY)/2023-24 Rs. 179750.00 15,815.00 3 SR No.02/EE(E)(PDY)/2023-24 Rs. 3458719.00 2,73,564.00 4 SR No.03/EE(E)(PDY)/2023-24 Rs.
Basic Detail
Tender No 66(1)/EE(E)(Puducherry)/2023/PB/892
Bidding Type Tender
Location
City Pondicherry
State Puducherry
Key Dates
Publish Date 30 Dec 2023
Submission Date 17 Jan 2024
Open Date 01 Jan 0001
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
e19ed13a-a115-4461-b527-ecc34c4be340.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 30, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 17, 2024
17:00 IST

Bid Submission Deadline

Offline submission at the designated office.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

e19ed13a-a115-4461-b527-ecc34c4be340.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders